New
#11
thanks for your reply... will be begin the harddisk test later as for now i have no cd...
Crystal Disk Info summary- 1 had open laptop for 1 hour..seem my harddisk not in a good condition
thanks for your reply... will be begin the harddisk test later as for now i have no cd...
Crystal Disk Info summary- 1 had open laptop for 1 hour..seem my harddisk not in a good condition
The caution indication can be converted to good using CrystalDiscInfo. Click on the caution Button, you will get another window ....
In the resulting window, there are three sliders in the left. Drag them to the ultimate left, and notice the values at the right side are converting to zeros.
Now click the apply button, and notice that the caution is gone or not.
the caution is gone after shifting the three slide to zero..i will report back once i done the harddisk test
Thanks Archie, and will look forward to seeing your results.
Few errors detected when doing the long test using seatools...seatools recommended to repair the error and I had done that..-first two picture
I also had done the test for the second time and no error was found... After the test no sign of BSOD yet.. :) - last two picture
BSOD still occuring... any other step that I need to do>>
Update your ATI/AMD display driver.Code:fffff880`00db9000 fffff880`00de5000 atikmpag T (no symbols) Loaded symbol image file: atikmpag.sys Image path: \SystemRoot\system32\DRIVERS\atikmpag.sys Image name: atikmpag.sys Timestamp: Fri Jan 22 18:37:54 2010 (4B59A32A) CheckSum: 000279B5 ImageSize: 0002C000 Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
You can get it from the link in our forum, Latest AMD Catalyst Video Driver for Windows 7, or you may go to AMD Graphics Driver and Software and opt for Automatically Detect and Install the appropriate driver for your card. Or you may get it from the ASUS's site, too.
During installation, you may opt for advanced installation, and install the display driver only, not the Catalyst Control Center.
Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.
Also, if possible, plan to update the BIOS.
Code:BIOS Version/Date American Megatrends Inc. 218, 7/29/2011According to Carrona.org, STOP 0x0000001E: KMODE_EXCEPTION_NOT_HANDLEDCode:******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck 1E, {ffffffffc000001d, fffff88000000018, 2, fffffa8003b9c100} Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+4977d ) Followup: MachineOwner ---------
Usual causes: Device driver, hardware, System service, compatibility, Remote control programs, memory, BIOS
Thanks for your reply.. Now I downloading the AMD driver but may abit take time since my internet connection not that good..
For the memtest, I had done the test 2 day ago but then no error was found even after 18passes. Do I need to rerun the test?
I am a beginner. Can you show me the safe way to update BIOS? Will my harddisk content will be formatted when update the BIOS?