BSOD error after ~30 minutes on

Page 6 of 6 FirstFirst ... 456
  1.    #51

    Code:
    BugCheck D1, {0, 6, 8, 0}
    
    *** WARNING: Unable to verify timestamp for atikmdag.sys
    *** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
    Probably caused by : atikmdag.sys ( atikmdag+265e9c )
    Code:
    2: kd> lmvm atikmdag
    start             end                 module name
    fffff880`04816000 fffff880`053c9000   atikmdag T (no symbols)           
        Loaded symbol image file: atikmdag.sys
        Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
        Image name: atikmdag.sys
        Timestamp:        Fri Nov 16 20:18:02 2012 (50A69F7A)
        CheckSum:         00B65E3C
        ImageSize:        00BB3000
        Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
    Since you have updated your driver to latest WHQL version, then it also could be your graphics card at fault here.

    Graphics Card:

    Read all the steps within the hardware test tutorials very carefully, as stress tests is designed run components to their maximum capacity, in order to point out failing or faulty hardware components.

    Use the following program to monitor your hardware temperatures during the stress test:

    Are you overclocking any hardware? What are your idle temperatures?
      My Computer


  2. Posts : 27
    Window 7 home premium 64 bit
    Thread Starter
       #52

    x BlueRobot said:
    Code:
    BugCheck D1, {0, 6, 8, 0}
    
    *** WARNING: Unable to verify timestamp for atikmdag.sys
    *** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
    Probably caused by : atikmdag.sys ( atikmdag+265e9c )
    Code:
    2: kd> lmvm atikmdag
    start             end                 module name
    fffff880`04816000 fffff880`053c9000   atikmdag T (no symbols)           
        Loaded symbol image file: atikmdag.sys
        Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
        Image name: atikmdag.sys
        Timestamp:        Fri Nov 16 20:18:02 2012 (50A69F7A)
        CheckSum:         00B65E3C
        ImageSize:        00BB3000
        Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
    Since you have updated your driver to latest WHQL version, then it also could be your graphics card at fault here.

    Graphics Card:

    Read all the steps within the hardware test tutorials very carefully, as stress tests is designed run components to their maximum capacity, in order to point out failing or faulty hardware components.

    Use the following program to monitor your hardware temperatures during the stress test:

    Are you overclocking any hardware? What are your idle temperatures?
    I will try to do the stress test... I never overclock any hardware.. I also never check the idle temperature...
    Besides, my laptop just having BSOD again..
      My Computer


  3. Posts : 27
    Window 7 home premium 64 bit
    Thread Starter
       #53

    I done the video card stress...I just done for 10 minute and the temperature maintain around 70-85... do I need to do longer??
      My Computer

  4.    #54

    Post a screenshot of your idle temperature, and it seems your graphics card is overheating very quickly.

    Update your System Specifications with Speccy, and then copy this information into your System Specifications: Go to your UserCP, and then select Edit System Spec in the left pane. Copy the information from Speccy into the required fields. These System Specifications will then follow your every post.

    Code:
    BugCheck FC, {fffff88002ffb9f0, 80000000285ba963, fffff88002ffb830, 0}
    
    *** WARNING: Unable to verify timestamp for atikmdag.sys
    *** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
    Probably caused by : atikmdag.sys ( atikmdag+b3eab )
      My Computer


  5. Posts : 27
    Window 7 home premium 64 bit
    Thread Starter
       #55

    x BlueRobot said:
    Post a screenshot of your idle temperature, and it seems your graphics card is overheating very quickly.

    Update your System Specifications with Speccy, and then copy this information into your System Specifications: Go to your UserCP, and then select Edit System Spec in the left pane. Copy the information from Speccy into the required fields. These System Specifications will then follow your every post.

    Code:
    BugCheck FC, {fffff88002ffb9f0, 80000000285ba963, fffff88002ffb830, 0}
    
    *** WARNING: Unable to verify timestamp for atikmdag.sys
    *** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
    Probably caused by : atikmdag.sys ( atikmdag+b3eab )
    I uploaded the idle temperature...
    Does it means that my graphic card causing the problem??
      My Computer

  6.    #56

    There may be some overheating issues, have you tried cleaning the case with a can of compressed air? Have you made sure that the fans are free of dust?
      My Computer


 
Page 6 of 6 FirstFirst ... 456

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 21:33.
Find Us