Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 random BSOD's while not in use

13 Mar 2013   #11
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

"amd drivers have crashed and successfully recovered." is generally a hardware failure. As it is the first time, consider it as a driver bug initially and roll the driver back to the earlier one that worked good for you.
Device Manager - Roll Back Driver


My System SpecsSystem Spec
.
13 Mar 2013   #12
Zach1928

Windows 7 Home Premium 64bit
 
 

I will give that a shot, in the mean time could you check this? I have a feeling its the same issue
My System SpecsSystem Spec
13 Mar 2013   #13
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by Zach1928 View Post
I will give that a shot, in the mean time could you check this? I have a feeling its the same issue
Yes it is.
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 116, {fffffa8006a404e0, fffff88003ac7efc, 0, 2}

Unable to load image \SystemRoot\system32\DRIVERS\atikmpag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
Probably caused by : atikmpag.sys ( atikmpag+8efc )

Followup: MachineOwner
---------
Next time let us know the results of the procedure you followed. Simply Crash dump analysis will not help you in this case, it is your pare mainly for a stop 0x116.
My System SpecsSystem Spec
.

13 Mar 2013   #14
Zach1928

Windows 7 Home Premium 64bit
 
 

Ughh. I mean I went to run a WEI and during the graphics analysis the screen flash, came back up with the recovered drivers balloon, and then flashed again and came up with the blue screen stop code 0x116. But when it boots there are red lines running vertically down the screen and I have to boot into safe mode and use a restore point if I want to get back into windows. I dunno if it's worth a shot to uninstall, boot into safemode and run driver sweeper and then try to reinstall the drivers once more
My System SpecsSystem Spec
13 Mar 2013   #15
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Have you rolled back the driver?

If it is happening irrespective of the driver version, you can do one more thing. Check the Temperature of the system. Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy.

If the computer is not overheating, you may test the onboard graphics.... is it happening the same thing there or not.
My System SpecsSystem Spec
13 Mar 2013   #16
Zach1928

Windows 7 Home Premium 64bit
 
 

It's not over heating because theres a vga cooling fan right underneath the gpu blowing air onto it and the machine will stay on for hours no problem, usually right around ~45c. I found a guide on a different site that goes through how to throroughly remove all amd drivers and folders so I may try that
My System SpecsSystem Spec
Reply

 Windows 7 random BSOD's while not in use




Thread Tools




Similar help and support threads
Thread Forum
BSOD (random ones at random times) Windows 7
I have a random BSOD issue. I thought I had fixed it but still having issues. I recently installed Windows 7 home premium edition to a new hard drive. I was having issues with a small older drive, so I went with fresh install thinking it would fix my issues. nope. New drive and new...
BSOD Help and Support
Random BSOD after start and Random stuck on windows logo screen
Heyy.. So yesterday due to a sudden power outage (happens allot here), my windows started behaving erratically. First when the power came on my windows 7 ultimate 64 bit, was stuck on windows logo. i waited for about 20 mins and it was still stuck. The HDD read activity light on my casing was...
BSOD Help and Support
Random BSOD problems in the past 2 days. Random errors at random times
Three days ago my water cooling failed (got up to 77C while gaming is when I noticed the problem as my CPU should not go over 62C). I decided to install an aftermarket heatsink instead of a new water cooling system ,and add a few more fans just to make sure my whole motherboard was getting plenty...
BSOD Help and Support
Random BSOD with random error code at random moment
Hello Ok now i'm out of solution so i come here hoping that someone could help me I always had bsod hapening randomly but not like the this week I got 2 bsod/day when i'm playing, when i'm staring at my monitor or even when i'm sleeping with random error code like 0x1e, 0x24, 0x3b, 0x4a or 0xa...
BSOD Help and Support
Windows 7 random BSOD
KERNEL_MODE_EXCEPTION_NOT_HANDLED 0x1000008e and MEMORY_MANAGEMENT 0x0000001a Happens 1-2 times/month. Tried to update drivers. Didn't help
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:13.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App