New
#11
thank you
it was working fine last night and i shut it down. nothing major would have made anything loose. but i did open the case up and reconnect to sata cable going from the drive to the MOBO. i also reconnected the cable coming from the PSU. This did not seem to help the problem at all.
dbonata I will let Harry here take over on this porblem as it's not really my thing to deal with BSOD INACCESSIBLE_BOOT_DEVICE to me seems the problem. Harry will help you a lot faster than I could.
PROBLEM SOLVED.
i went into the bios of my MOBO and i looked at the sata connectors. for some reason they were set to run in IDE. So i changed it back into AHCI and booted it up. System seems to run normal atm.
Thank you all for helping me and best of luck :)
Post back here if you have any other problems.