BSOD often after boot up CRASH DUMP points to STORPORT.SYS

There are some USBPORT.sys error.

Code:

fffff800`00b9ca98  fffff880`078025c2 USBPORT!USBPORT_Xdpc_iSetState+0x2a
fffff800`00b9cac8  fffff880`07802783 USBPORT!USBPORT_Xdpc_iSignal+0xcb
fffff800`00b9caf8  fffff880`07805f99 USBPORT!USBPORT_ReleaseEpListLock+0x21

So you may need to update these drivers....

No code has to be inserted here.As those are seeming very old.

Code:

fffff880`05c86000 fffff880`05c9f000   nusb3hub   (deferred)             
    Image path: nusb3hub.sys
    Image name: nusb3hub.sys
    Timestamp:        Thu Feb 10 11:22:32 2011 (4D537D20)
    CheckSum:         000192B8
    ImageSize:        00019000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Update the driver from Support/Design | Renesas Electronics. You may need to register there to search for it.

The Storport.sys error is also there.

Code:

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {128411, 2, 8, 128411}

Probably caused by : storport.sys ( storport!RaidpAdapterDpcRoutine+53 )

Followup: MachineOwner
---------

First you try to update OCZ Revo Drive 3 and 3 x2 SCSI Controller, from OCZ Drivers Download.

Code:

fffff880`01639000 fffff880`0169e000   ocz10xx    (deferred)             
    Image path: ocz10xx.sys
    Image name: ocz10xx.sys
    Timestamp:        Fri Apr 06 05:38:34 2012 (4F7E3402)
    CheckSum:         0002E427
    ImageSize:        00065000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Then, search for any possible firmware update of your PCIe SSD .... OCZ-REVODRIVE 3.
http://ocz.com/consumer/download/firmware

Free up the startup.

1. Click on the Start button
2. Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
3. Select the “Startup” tab.
4. Deselect all items other than the antivirus.
5. Apply > OK
6. Accept then restart.

Let us know the results.

EDIT: Download and install this particular version of Intel RST.

N.AV