BSOD,error 0x0000001e Dump Info Included, Help!

Page 1 of 2 12 LastLast

  1. Posts : 8
    Windows 7 64 bit
       #1

    BSOD,error 0x0000001e Dump Info Included, Help!


    Acer all in One running Windows 7 64 bit. Am getting the BSOD 0x0000001e when trying to attach pictures to email and also when I try to connect to my playbook through USB port or even through wireless network.
    Included is a copy of the Dmp info.
    Hopefully someone can help.
    Thanks
    Tony in Snowy Canada
    System Information (local)
    </B>
    computer name:
    windows version: Windows 7 , 6.1, build: 7600
    windows dir: C:\Windows
    CPU: GenuineIntel Intel(R) Pentium(R) CPU G6950 @ 2.80GHz Intel586, level: 6
    2 logical processors, active mask: 3
    RAM: 4151427072 total
    VM: 2147352576, free: 1943621632



    Crash Dump Analysis
    </B>

    Crash dump directory: C:\Windows\Minidump

    Crash dumps are enabled on your computer.


    On Fri 30/12/2011 2:36:16 PM GMT your computer crashed
    crash dump file: C:\Windows\Minidump\123011-16458-01.dmp
    This was probably caused by the following module: ntoskrnl.exe (nt+0x705C0)
    Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF88006189CD0, 0x0, 0x0)
    Error: KMODE_EXCEPTION_NOT_HANDLED
    file path: C:\Windows\system32\ntoskrnl.exe
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    description: NT Kernel & System
    Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
    This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.


    On Fri 30/12/2011 2:36:16 PM GMT your computer crashed
    crash dump file: C:\Windows\memory.dmp
    This was probably caused by the following module: ksecdd.sys (ksecdd+0x21A3)
    Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF88006189CD0, 0x0, 0x0)
    Error: KMODE_EXCEPTION_NOT_HANDLED
    file path: C:\Windows\system32\drivers\ksecdd.sys
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    description: Kernel Security Support Provider Interface
    Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
    This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system which cannot be identified at this time.


    On Fri 30/12/2011 2:00:06 PM GMT your computer crashed
    crash dump file: C:\Windows\Minidump\123011-15366-01.dmp
    This was probably caused by the following module: ntoskrnl.exe (nt+0x705C0)
    Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF880065CECD0, 0x0, 0x0)
    Error: KMODE_EXCEPTION_NOT_HANDLED
    file path: C:\Windows\system32\ntoskrnl.exe
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    description: NT Kernel & System
    Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
    This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.


    On Fri 30/12/2011 1:24:11 PM GMT your computer crashed
    crash dump file: C:\Windows\Minidump\123011-18844-01.dmp
    This was probably caused by the following module: ntoskrnl.exe (nt+0x705C0)
    Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF880047F3CD0, 0x0, 0x0)
    Error: KMODE_EXCEPTION_NOT_HANDLED
    file path: C:\Windows\system32\ntoskrnl.exe
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    description: NT Kernel & System
    Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
    This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.


    On Fri 30/12/2011 1:15:24 PM GMT your computer crashed
    crash dump file: C:\Windows\Minidump\123011-20654-01.dmp
    This was probably caused by the following module: ntoskrnl.exe (nt+0x705C0)
    Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF88006579CD0, 0x0, 0x0)
    Error: KMODE_EXCEPTION_NOT_HANDLED
    file path: C:\Windows\system32\ntoskrnl.exe
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    description: NT Kernel & System
    Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
    This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.


    On Fri 30/12/2011 1:11:06 PM GMT your computer crashed
    crash dump file: C:\Windows\Minidump\123011-22167-01.dmp
    This was probably caused by the following module: ntoskrnl.exe (nt+0x705C0)
    Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF88002662CD0, 0x0, 0x0)
    Error: KMODE_EXCEPTION_NOT_HANDLED
    file path: C:\Windows\system32\ntoskrnl.exe
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    description: NT Kernel & System
    Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
    This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.



    Conclusion

    </B>

    6 crash dumps have been found and analyzed.
    Read the topic general suggestions for troubleshooting system crashes for more information.

    Note that it's not always possible to state with certainty whether a reported driver is actually responsible for crashing your system or that the root cause is in another module. Nonetheless it's suggested you look for updates for the products that these drivers belong to and regularly visit Windows update or enable automatic updates for Windows. In case a piece of malfunctioning hardware is causing trouble, a search with Google on the bug check errors together with the model name and brand of your computer may help you investigate this further.



      My Computer


  2. JMH
    Posts : 7,952
    Win 7 Ultimate 64-bit. SP1.
       #2

    No DMP included above...

    We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

    You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

    To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

    The procedure:
    * Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
    * Zip up the copy.
    * Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
    *If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.
    To ensure minidumps are enabled:
    * Go to Start, in the Search Box type: sysdm.cpl, press Enter.
    * Under the Advanced tab, click on the Startup and Recovery Settings... button.
    * Ensure that Automatically restart is unchecked.
    * Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
    * Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
    * OK your way out.
    * Reboot if changes have been made.
      My Computer


  3. Posts : 8
    Windows 7 64 bit
    Thread Starter
       #3

    Minidump file for BSOD, oxoooooo1e


    Thank you so much for the help and now I believe I have the mini dump file you requested.
      My Computer


  4. Posts : 8
    Windows 7 64 bit
    Thread Starter
       #4

    More BSOD Dump Info


    I did not have all my settings setup for the Dump file as you requested, here was the most recent file after I plugged in my Blackberry Playbook to the USB port.

    Thanks again so much for all that have helped.
    Happy New Year
    Tony
      My Computer


  5. JMH
    Posts : 7,952
    Win 7 Ultimate 64-bit. SP1.
       #5

    twistertime / Tony.
    Your problems were probably caused by Kernel Security Support Provider Interface.

    To hopefully alleviate the situation...

    > Please run the update readiness tool and then update to SP-1

    Ensure you install the correct 64 or 32 bit option for your system)
    Download the System Update Readiness Tool (64bit)
    Download the System Update Readiness Tool (32bit)

    http://windows.microsoft.com/installwindows7sp1


    > Download Malwarebytes free version.
    Update immediately.
    Run a Full System Scan.

    Let us know the results.
    Good luck & Happy New Year to you too.

    Malwarebytes : Download free malware, virus and spyware tools to get your computer back in shape!
      My Computer


  6. Posts : 8
    Windows 7 64 bit
    Thread Starter
       #6

    BSOD Update


    Took the SP1 update and it was succesful. Did the Malware check and it found nothing. Plugged my Blackberry Playbook into the USB port and Windows recognized it and installed a driver for the Playbook and then....BSOD, included the dump file- 010112-24336-01.
    So I rebooted the computer and went to post a reply to this thread and when I clicked on the browse button to attach the dump file......BSOD!I have attached a second dump file for the second BSOD, it is file 010112-18142-01. So I rebooted in Safe Mode with Networking and now I am posting these 2 dump files for help ( they may show the same thing but I thought I would post all details of what happened along with the files).
    I can tell you this much, since taking the iupdates it does not seem to be any different then it has been all along.

    Thanks for your help and Happy New Year!
      My Computer


  7. JMH
    Posts : 7,952
    Win 7 Ultimate 64-bit. SP1.
       #7

    These crashes were caused by memory corruption (probably a driver).
    Please run these two tests to verify your memory and find which driver is causing the problem.

    If you are overclocking anything reset to default before running these tests.
    In other words STOP!!!



    1-Memtest.
    *Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

    *Boot from the CD, and leave it running for at least 5 or 6 passes.

    Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

    Test the sticks individually, and if you find a good one, test it in all slots.

    Any errors are indicative of a memory problem.

    If a known good stick fails in a motherboard slot it is probably the slot.

    RAM - Test with Memtest86+



    2-Driver verifier

    I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

    In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

    Then, here's the procedure:
    - Go to Start and type in "verifier" (without the quotes) and press Enter
    - Select "Create custom settings (for code developers)" and click "Next"
    - Select "Select individual settings from a full list" and click "Next"
    - Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
    - Select "Select driver names from a list" and click "Next"
    Then select all drivers NOT provided by Microsoft and click "Next"
    - Select "Finish" on the next page.

    Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

    If you can't get into Windows because it crashes too soon, try it in Safe Mode.
    If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
    Driver Verifier - Enable and Disable


    Further Reading
    Using Driver Verifier to identify issues with Windows drivers for advanced users


    Old drivers you have there may be problematic as indeed AVG.
    Yet to be determined.
      My Computer


  8. Posts : 8
    Windows 7 64 bit
    Thread Starter
       #8

    BSOD Update


    Thanks for the reply/help.Here is an update even though longer testing is being run as we speak.

    Did the memtest 6 times over and there were no faults found.

    Did the Driver Verifier as stated in an earlier post by JMH and I rebooted and ran the computer with no issues for several hours. Decided to try and create the fault as it was created before by plugging in the Blackberry Playbook to my USB port. The computer faulted out after plugging in the Playbook but did not give me a BSOD it actually just rebooted ( this being different then when not running driver verifier as I would get a BSOD).
    I did not see anything from Driver Verifier? Should a fault show in a popup window if it detects something from the non microsoft drivers?

    Thanks again for your patience.
    Tony
      My Computer


  9. JMH
    Posts : 7,952
    Win 7 Ultimate 64-bit. SP1.
       #9

    twistertime said:
    Thanks for the reply/help.

    I did not see anything from Driver Verifier? Should a fault show in a popup window if it detects something from the non microsoft drivers?

    Thanks again for your patience.
    Tony

    Re Driver Verifier.
    The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.


    If it crashes a Dmp file should be produced for us to further analyze.
      My Computer


  10. Posts : 8
    Windows 7 64 bit
    Thread Starter
       #10

    BSOD Update


    I do see what you are trying to do with the "OverTaxing" the drivers to get it to happen.Before the changes to the Verifier setup there were 2 ways to get the BSOD, plugging in the Playbook and also attaching a file to an email/post would create the error and thus a dump file. Now when I do this same condition I do not get the BSOD, it just reboots and with the non BSOD then there is no dump file and this is new since the changes. So I am wondering if it faults out on it's own will it just reboot and tell us nothing?
    Does this information help in any way?
    It has been 12 hours and no faults when running normal without tying to cause the issue as stated above.

    Thanks again,
    Tony
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 08:53.
Find Us