Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Power Driver State Failure After System Resume

12 Apr 2013   #1
masm50

Windows 7 x64 Home Premium
 
 
BSOD Power Driver State Failure After System Resume

Hi,

I had this problem a while back but it went away by itself (and me making sure all drivers, etc were up to date).
However, it is now back and I'm at a loss as to the cause.

Essentially, after I resume my laptop after sleep/hibernation then it works for 5-10 minutes and then I get the BSOD POWER_DRIVER_STATE_FAILURE. After rebooting everything works great again and I don't get any crashes. This doesn't happen if I switch the laptop off and then switch it on again, only after resume.

I've attached the SF Diagnostics Tool zip, and any pointers would be very much appreciated.

Thanks!


My System SpecsSystem Spec
.
12 Apr 2013   #2
x BlueRobot

 

There's no crash dumps in the folder uploaded:
My System SpecsSystem Spec
12 Apr 2013   #3
masm50

Windows 7 x64 Home Premium
 
 

Whoops, sorry about that. I have the kernel memory dump but that is ~600MB.
Should I upload that somewhere (way to big an attachment for here - any preference on file host?), or just wait for the next BSOD now I've switched the settings to Minidump?

Thanks
My System SpecsSystem Spec
.

12 Apr 2013   #4
x BlueRobot

 

Wait for the next BSOD, keep the settings for Minidump.
My System SpecsSystem Spec
25 May 2013   #5
masm50

Windows 7 x64 Home Premium
 
 

Hi again,

Oddly, I had avoided the BSOD since April, but I've had it a few times again in exactly the same circumstances, so though I would post here again with a minidump and all SF diagnostics

Thanks for any help!
My System SpecsSystem Spec
25 May 2013   #6
x BlueRobot

 

Code:
BugCheck 9F, {3, fffffa800a3d9060, fffff80004a413d8, fffffa800e358b80}

Probably caused by : usbhub.sys
Code:
0: kd> !irp fffffa800e358b80
Irp is active with 10 stacks 9 is current (= 0xfffffa800e358e90)
 No Mdl: No System Buffer: Thread 00000000:  Irp stack trace.  
     cmd  flg cl Device   File     Completion-Context
 [  0, 0]   0  0 00000000 00000000 00000000-00000000    

			Args: 00000000 00000000 00000000 00000000
 [  0, 0]   0  0 00000000 00000000 00000000-00000000    

			Args: 00000000 00000000 00000000 00000000
 [  0, 0]   0  0 00000000 00000000 00000000-00000000    

			Args: 00000000 00000000 00000000 00000000
 [  0, 0]   0  0 00000000 00000000 00000000-00000000    

			Args: 00000000 00000000 00000000 00000000
 [  0, 0]   0  0 00000000 00000000 00000000-00000000    

			Args: 00000000 00000000 00000000 00000000
 [  0, 0]   0  0 00000000 00000000 00000000-00000000    

			Args: 00000000 00000000 00000000 00000000
 [  0, 0]   0  0 00000000 00000000 00000000-00000000    

			Args: 00000000 00000000 00000000 00000000
 [  0, 0]   0  0 00000000 00000000 00000000-00000000    

			Args: 00000000 00000000 00000000 00000000
>[ 16, 2]   0 e1 fffffa800a3d9060 00000000 00000000-00000000    pending
	       \Driver\usbhub
			Args: 00051100 00000001 00000001 00000002
 [  0, 0]   0  0 00000000 00000000 00000000-fffffa800b3439b0    

			Args: 00000000 00000000 00000000 00000000
This bugcheck indicates that a device object is blocking a IRP for too long. The major function code 16 (IRP_MJ_POWER), means that the IRP has been sent to a power-related stack, with the minor function code 2 (IRP_MN_SET_POWER), indicating that a request has been sent.

Your raw stack trace indicates that your Intel onboard graphics card is causing issues, please update the driver from here - Intel® Driver Update Utility

Code:
0: kd> lmvm igdkmd64
start             end                 module name
fffff880`0f25a000 fffff880`1006a000   igdkmd64 T (no symbols)           
    Loaded symbol image file: igdkmd64.sys
    Image path: igdkmd64.sys
    Image name: igdkmd64.sys
    Timestamp:        Mon Mar 19 23:31:54 2012 (4F67C1EA)
    CheckSum:         00E13247
    ImageSize:        00E10000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Reduce the number of programs at startup, to avoid any driver or program conflicts:
My System SpecsSystem Spec
25 May 2013   #7
masm50

Windows 7 x64 Home Premium
 
 

Great - thanks for your help!
My System SpecsSystem Spec
26 May 2013   #8
x BlueRobot

 

Welcome, any issues so far?
My System SpecsSystem Spec
26 May 2013   #9
masm50

Windows 7 x64 Home Premium
 
 

Nope, this seems to have done the trick so far - thanks again!
My System SpecsSystem Spec
26 May 2013   #10
x BlueRobot

 

That's good to know, leave the thread open for a few more days, and then mark it has solved :)
My System SpecsSystem Spec
Reply

 BSOD Power Driver State Failure After System Resume




Thread Tools




Similar help and support threads
Thread Forum
BSOD Driver power state failure when shutting down /failure USBports
Hi, I've been browsing the site and the internet for a sollution to my problem, but can't seem te find it. There are similar postings, but they're always just a little different. So that's why i posted the new thread. Since a couple of days i've been experiencing troubles shutting down...
BSOD Help and Support
Driver power state failure, System service exception, among others.
Hi everyone. As the title suggests, I'm having trouble with blue screens (several). As the frequency of these have risen to roughly once a day, I've finally had enough. Most of these BSODs will happen at random times, like browsing the internet, playing a game, watching a video, you name it (aside...
BSOD Help and Support
BSOD: Driver power State Failure
Hello, About 50% of the time that I shut down my PC, it freezes on the message "Shutting down" and after a while gives me a BSOD. I also get a BSOD every now and then when I'm browsing the web. I've ran the SF diagnostic tool and will post the results here. I also came across the following...
BSOD Help and Support
BSOD System Service Exception/Driver Power State Failure
I kept getting a BSOD with System Service Exception. I tried to reinstall my video card driver and afterwards received Driver Power State Failure. Really appreciate any help anybody can give me. Thanks for any help!
BSOD Help and Support
BSOD - driver power state failure
Hi, I'm new to this forum but i hope you can help with BSOD issues on my windows 7 Laptop. I have a HP HDX18 Laptop that is about 8months old. I bought it with Vista home premium and upgraded to windows 7 home premium when it was released. As soon as i upgraded i started having blue...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 08:36.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App