Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: fresh install still get BSOD

13 Apr 2013   #1

win 7 pro x64
fresh install still get BSOD

I installed an SSD and put a new copy of win 7 pro on it, within a day it crashed. I rarely ever see the BSOD, I usually see the windows has recovered from an unexpected error screen.

The new installation only has a few application installed, mostly just window updates, microsoft security essentials, steam.

I ran memtest and didnt come up with any errors.

My System SpecsSystem Spec
13 Apr 2013   #2

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit

*                                                                                                                                           *
*                        Bugcheck Analysis                                                                                           *
*                                                                                                                                           *

An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arg1: 00005a800ac1c3bb, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bitfield :
	bit 0 : value 0 = read operation, 1 = write operation
	bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002a8a3c9, address which referenced memory

Debugging Details:

TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002cb1100
GetUlongFromAddress: unable to read from fffff80002cb11c0
 00005a800ac1c3bb Nonpaged pool


fffff800`02a8a3c9 410fb6511b      movzx   edx,byte ptr [r9+1Bh]




PROCESS_NAME:  csrss.exe

TRAP_FRAME:  fffff88007baf5d0 -- (.trap 0xfffff88007baf5d0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000020000395ebe rbx=0000000000000000 rcx=00000000003960a7
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002a8a3c9 rsp=fffff88007baf760 rbp=0000000000000000
 r8=fffff88007baf790  r9=00005a800ac1c3a0 r10=0000000000000001
r11=0000000000000001 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz na po nc
fffff800`02a8a3c9 410fb6511b      movzx   edx,byte ptr [r9+1Bh] ds:00005a80`0ac1c3bb=??
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80002a791a9 to fffff80002a79c00

fffff880`07baf488 fffff800`02a791a9 : 00000000`0000000a 00005a80`0ac1c3bb 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff880`07baf490 fffff800`02a77e20 : fffff880`07baf670 fffffa80`10d36ca0 fffff880`00000000 fffffa80`0ac1f370 : nt!KiBugCheckDispatch+0x69
fffff880`07baf5d0 fffff800`02a8a3c9 : fffffa80`0abf2340 00000000`00000005 fffff800`02cb4d48 fffff680`00021240 : nt!KiPageFault+0x260
fffff880`07baf760 fffff800`02aaa06b : fffffa80`0ac1f370 fffffa80`0dc24ec8 00000000`00000000 0004d80c`00000080 : nt!MiUnlinkPageFromLockedList+0x169
fffff880`07baf7e0 fffff800`02a96c8f : 00000000`00000001 00000000`00000000 fffffa80`113f0000 fffffa80`0dc24ec8 : nt!MiResolveTransitionFault+0x16b
fffff880`07baf870 fffff800`02a86179 : fffffa80`113f9420 ffffffff`ffffffff fffffa80`0f2d7b50 00000000`00000000 : nt!MiDispatchFault+0x95f
fffff880`07baf980 fffff800`02a77d2e : 00000000`00000001 00000000`042490ae 00000000`0049bb01 00000000`004066c0 : nt!MmAccessFault+0x359
fffff880`07bafae0 00000000`76fc676f : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x16e
00000000`057dedd0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x76fc676f


fffff800`02a8a3c9 410fb6511b      movzx   edx,byte ptr [r9+1Bh]


SYMBOL_NAME:  nt!MiUnlinkPageFromLockedList+169

FOLLOWUP_NAME:  MachineOwner



IMAGE_NAME:  memory_corruption

FAILURE_BUCKET_ID:  X64_0xA_nt!MiUnlinkPageFromLockedList+169

BUCKET_ID:  X64_0xA_nt!MiUnlinkPageFromLockedList+169

Followup: MachineOwner
Test Your memory once more . Let it run to 8 passes
My System SpecsSystem Spec
13 Apr 2013   #3

win 7 pro x64

I've ran it twice past 8 passes and it still checks out okay.
My System SpecsSystem Spec

13 Apr 2013   #4

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit

Do you have the current firmware on your SSD ?

You may also want to run SFC /scannow

Click on type CMD inside Search programs and files right click on CMD under Programs (1) choose Run as administrator . Click on Yes inside the UAC window . Once command prompt opens up . Path should be C:\Windows\System32>_
Type this command and press <ENTER>

SFC /scannow

Once that is done run this command

Chkdsk /f /r
My System SpecsSystem Spec
13 Apr 2013   #5

win 7 pro x64

Would conflicting memory cause this? The memory I have installed is apparently not on the qualified vendors list for the motherboard.

G.SKILL Ripjaws Series 16GB Desktop Memory Model F3-12800CL9Q-16GBRL -

I have an asus m5a97.
My System SpecsSystem Spec
13 Apr 2013   #6

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit


Your motherboard supports dual channel memory when your sticks are qual channel memory . Don't think that will work on your board . Just cause your motherboard has 4 dim slots doesn't mean it supports quad channel . Each memory slot is color coded for a reason . Blue is one channel black is another . If you want to get 16gb you would need to purchase 2 kits of 8Gb dual channel memory kits - Computer Hardware, Memory, Desktop Memory, G.SKILL, Dual Channel Kit, 16GB (2 x 8GB)
My System SpecsSystem Spec
13 Apr 2013   #7

win 7 pro x64

Your right, I purchased those but they didnt work. It only showed up as 8gb. I currently have the same model but 2 sets of dual channel instead
My System SpecsSystem Spec
13 Apr 2013   #8

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit

The Quad Channel Memory will only be read as Dual Channel cause that is what your board supports .


I'd personally run the memtest over night . The test might fail towards the end . Seen it happen many times .
My System SpecsSystem Spec
13 Apr 2013   #9

win 7 pro x64

okay, ill run it tonight. What are your suggested brands or models of memory?
My System SpecsSystem Spec
13 Apr 2013   #10

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit

I'd personally go for Corsair . Use to go for OCZ until they stopped selling memory and became strictly SSD drives . Check with your manual and see what speed your board could use then go with the brand .
My System SpecsSystem Spec

 fresh install still get BSOD

Thread Tools

Similar help and support threads
Thread Forum
BSOD playing Guild Wars 2, recent SSD install and fresh install of W7
I just added a new SSD drive and installed a fresh copy of Win 7 Enterprise. I have had a previous driver issue with this system in the past. The amazing people on this site helped me work it out. Now for the life I just can't seem to sort it out again myself this time. I ran and uploaded the...
BSOD Help and Support
BSOD on fresh install when install updates, misc error codes
My system info is in my profile, installing Windows 7 x64 Ultimate Retail. Attached is all of the report info. I have no idea what is going on. Whenever I try to install all of the Windows updates it blue screens. Then it will reboot, try to apply the updates, and blue screen again. I've run...
BSOD Help and Support
bsod after fresh install
Let me know what you need. Just installed a fresh x64 pro on a new mb. ive been crashing non stop so it seems to be gpu, ram, or cpu. <3 Thanks guys.
BSOD Help and Support
BSOD crashes after fresh install of 7 64bit install
Hello from a first timer here. I'm using HP pavilion DV7-1195nr, 4gig, 9600m gt 1gig. I had Vista 64bit Prem. that ran just fine, and I did the Win 7 Prem. upgrade. It seems to run smooth until I started getting bsod. I decided to do a full install of Win 7 Prem from my upgrade disc. I...
BSOD Help and Support
Random BSOD - Fresh install, fresh system
Hi. I have installed a whole new windows 7 pro x64. My new mobo an ASus p5e3 pro along with new ram pc12800 gskill 2x2 ddr3 (running in 1066mhz due to my q6600) Everythingi s running perfectly...except some random BSOD. 4 total this week. I have posted a pack of dump file in here, the last 4...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:24.
Twitter Facebook