BSOD on start up, atikmdag.sys, dxgkrnl.sys, dxgmms1.sys

Darknessz · 23 Apr 2013

Yeah the one on the gigabyte site seems to be the one i have.
should i try installing it anyway or go for the one on the nec/renesas page

x BlueRobot · 23 Apr 2013

I would use the NEC page since the drivers are newer.

Darknessz · 23 Apr 2013

Updated driver and firmware successfully

x BlueRobot · 23 Apr 2013

Report if you have any further issues, use your computer as you normally would.

Darknessz · 23 Apr 2013

Will do.
Thank you very much!

x BlueRobot · 23 Apr 2013

Welcome, and thanks for the rep.

Darknessz · 23 Apr 2013

Thought i'd gotten away with it haha

another bsod
maybe i just need a new graphics card

x BlueRobot · 24 Apr 2013

Code:

BugCheck 119, {1, 91f4, 949b, 949a}

*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
Probably caused by : dxgmms1.sys ( dxgmms1!VidSchiVerifyDriverReportedFenceId+ad )

We'll made some progress, your no longer getting any USB port problems now, which is one positive.

The bugcheck still blames your Intel chipset driver and graphics card driver, the BSODs all seem to be graphics related, do you have a onboard graphics chip to switch to?

Overclocking -
I recommend if you are overclocking any hardware, that you reset these values within the BIOS to their default values in order to increase the stability of your system.

Graphics Card:

Video Card - Stress Test with Furmark

Warning

Read all the steps within the hardware test tutorials very carefully, as stress tests is designed run components to their maximum capacity, in order to point out failing or faulty hardware components.

You can download CoreTemp or another temperature monitoring program to assess the temperatures.

OCCT seems to be a little buggy earlier, especially with the voltage readings, so hopefully Furmark will be more consistent.

Darknessz · 26 Apr 2013

Havent had a chance to run the stress test yet. had 2 blue screens back to back which is new, usually they only happen once on start up. both happened some time after accessing my gmail account. maybe just coincidence?
About to run furmark, will post result shortly

VistaKing · 26 Apr 2013

Code:

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

VIDEO_SCHEDULER_INTERNAL_ERROR (119)
The video scheduler has detected that fatal violation has occurred. This resulted
in a condition that video scheduler can no longer progress. Any other values after
parameter 1 must be individually examined according to the subtype.
Arguments:
Arg1: 0000000000000001, The driver has reported an invalid fence ID.
Arg2: 000000000000211d
Arg3: 0000000000002314
Arg4: 0000000000002313

Debugging Details:
------------------

TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT

BUGCHECK_STR:  0x119

PROCESS_NAME:  System

CURRENT_IRQL:  9

Cause

Code:

FOLLOWUP_IP: 
dxgmms1!VidSchiVerifyDriverReportedFenceId+ad
fffff880`0573beb9 c744244053eeffff mov     dword ptr [rsp+40h],0FFFFEE53h

SYMBOL_STACK_INDEX:  2

SYMBOL_NAME:  dxgmms1!VidSchiVerifyDriverReportedFenceId+ad

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: dxgmms1

IMAGE_NAME:  dxgmms1.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  4ce799c1

FAILURE_BUCKET_ID:  X64_0x119_dxgmms1!VidSchiVerifyDriverReportedFenceId+ad

BUCKET_ID:  X64_0x119_dxgmms1!VidSchiVerifyDriverReportedFenceId+ad

Followup: MachineOwner

Reinstall your VIDEO CARD Driver.

Driver issues

Code:

??\C:\Program Files\SUPERAntiSpyware\SASKUTIL64.SYS 
\??\C:\Program Files\SUPERAntiSpyware\SASDIFSV64.SYS 
??\C:\Windows\system32\drivers\mbam.sys

Uninstall Software

Code:

C:\Program Files\SUPERAntiSpyware
MalwareBytes

Added Malwarebytes to the Uninstall Software list