New
#31
what will happen once i diable the DV?
Random BSOD on new Rig
-
-
New #32
Nothing your PC wont lag as it is right now . It just will puts stress on the drivers when enabled.
-
New #33
So it has been about two full days since I have had a bsod and I decided to disable the driver verifier. It hasnt been and hour or so and I got a bsod..... I have attached the zip file. I went ahead and re-enabled the driver verifier and will let it run for about a week or so. anythoughts on what it might be if I go through the entire week with no bsod?
-
-
New #35
When I started on the forms the rig was brand new. Everything on it except the psu was new outta the box.
-
-
New #37
any ideas as to which one with it being all new?
-
New #38
Do you have the most recent SSD firmware installed ?
Are these drivers up to date
Intel RST
Asmedia 106x
intel Gigabit network
Are you over clocking ? If so bring the CPU back to its original speed . Rerun the memory test . Reseat the memory .
-
New #39
i went to the asus website and downloaded all the newest drivers for my mobo and also got the latest firmware for the ssd when i got it up and running. i havnt done any ocing yet so the cpu should be at normal speed. i have went as far with the memory as even trying it in the other slots to see it that helps any but still the same.
-
New #40
Ok ive done a bit more research and have found out that my memory i have in here may not be compatiable with the mobo. maybe you could confirm this for me? My ram i have in here is Kingston Hyper X (S/N: KHX16C9B1R/4) i checked the asus maximus v gene and did not see it on the ram sheet.
Quote
Related Discussions