Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD - x64_0x124_GenuineIntel_PROCESSOR_BUS_PRV

08 May 2013   #1

Windows 7 Prof x64
BSOD - x64_0x124_GenuineIntel_PROCESSOR_BUS_PRV

I got a BSOD once or twice in February but it never came back, thought it would be alright. Then I moved offices in March, and it started happening again and much more often.

Oddly enough, right before it would BSOD, my internet connection would suddenly stop working, with the yellow caution icon, then the comp would freeze. Upon restart there was no internet connection AND the cd-rom was missing, as if not connected. I would try to restart or shutdown, and it would sometimes freeze on exit. Then on attempt 3 or 5 or 6 (random) it would suddenly run perfectly well, although I believe it would freeze upon shutdown/saving settings on exit.

Also, the computer turns itself on. I've checked the bios to make sure I have that setting turned off/disabled and it is. I've also tried keeping the ethernet unplugged in case it was from an outside source, no dice, still turned itself on.

What from I've read from the debug I've got mixed signals that it might be the processor failing, but I've run a stress test on it and it didn't BSOD after hours of stress testing (while playing MMORTS League of Legends, and watching netflix during load times - really pushing it). It seems to BSOD upon startup, and if it gets past start up it seems to run fine for as long as I keep it on.

Thank you in advance for any help you can offer.

My System SpecsSystem Spec
08 May 2013   #2

Windows 7

*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa8007cfc8f8, 0, 0}

Probably caused by : hardware

Followup: MachineOwner



FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: hardware

IMAGE_NAME:  hardware



BUCKET_ID:  X64_0x124_GenuineIntel_PROCESSOR_BUS_PRV

Followup: MachineOwner
From the first look, might be hardware failure, especially processor
I'll leave it to the others for further investigation...fingers crossed
My System SpecsSystem Spec
08 May 2013   #3
x BlueRobot


BugCheck 124, {0, fffffa8007bf9038, 0, 0}

Probably caused by : GenuineIntel
Section 2     : x86/x64 MCA
Descriptor    @ fffffa8007bf9148
Section       @ fffffa8007bf92d0
Offset        : 664
Length        : 264
Flags         : 0x00000000
Severity      : Fatal

Error         : BUSL0_SRC_ERR_M_NOTIMEOUT_ERR (Proc 0 Bank 0)
  Status      : 0xf200084000000800
The first parameter or argument has the value of 0x0, which is a Machine Check Exception, which means the CPU has detected a hardware problem and the address points to a processor error because the CPU has found one, so it could be a different form of hardware which is causing the issue.

In such a situation, it is best to use these steps:Enable "Round off checking" before the test (see first post below tutorial).All the hardware seeming to be running stable and tests reporting no errors, could mean a bad motherboard.
My System SpecsSystem Spec


 BSOD - x64_0x124_GenuineIntel_PROCESSOR_BUS_PRV

Thread Tools

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:55.
Twitter Facebook Google+