Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Multiple BSOD's occurring repeatedly between 30-60 mins after login

10 May 2013   #1
huangpi

Windows 7 Home Premium (x64) Service Pack 1
 
 
Multiple BSOD's occurring repeatedly between 30-60 mins after login

I have run memory checks and hard drive checks and they all seem to be fine. I am not super great with driver updating, but can do it if I know which one needs updating. This has been driving me crazy, and just started a day or two ago. I didnt update or change anything on the computer though which leads me to think it may be hardware related?

Here is my info... hope I uploaded it right. (sorry I am new here)

I would really appreciate any help on how I can fix this.


My System SpecsSystem Spec
.
11 May 2013   #2
cipley

Windows 7
 
 

STOP 0x00000109: CRITICAL_STRUCTURE_CORRUPTION
Usual causes: Device driver, Breakpoint set with no debugger attached, Hardware (Memory in particular)

STOP 0x0000003B: SYSTEM_SERVICE_EXCEPTION
Usual causes: System service, Device driver, graphics driver, ?memory

- Just to be sure, run memtest. Do it until at least 8 passes
RAM - Test with Memtest86+
Pay attention to point #3

- Enable Driver Verifier to monitor the drivers that may cause BSOD
Driver Verifier - Enable and Disable

- Run both chkdsk /r /f and SFC /scannow from elevated command prompt

as it is still too general to point out, refer to Blue Screen of Death (BSOD) Posting Instructions to get more file so we can get better info

BSOD ANALYSIS
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 109, {a3a039d896a03b96, b3b7465ee91e77d8, fffff80000b96bb0, 6}

*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Probably caused by : ntoskrnl.exe ( nt_fffff80000b95000+1bb0 )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

CRITICAL_STRUCTURE_CORRUPTION (109)
This bugcheck is generated when the kernel detects that critical kernel code or
data have been corrupted. There are generally three causes for a corruption:
1) A driver has inadvertently or deliberately modified critical kernel code
 or data. See http://www.microsoft.com/whdc/driver/kernel/64bitPatching.mspx
2) A developer attempted to set a normal kernel breakpoint using a kernel
 debugger that was not attached when the system was booted. Normal breakpoints,
 "bp", can only be set if the debugger is attached at boot time. Hardware
 breakpoints, "ba", can be set at any time.
3) A hardware corruption occurred, e.g. failing RAM holding kernel code or data.
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000005, fffff8800106a91b, fffff88007bd4bb0, 0}

Probably caused by : afd.sys ( afd!AfdFastDatagramSend+30b )

Followup: MachineOwner
---------
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
My System SpecsSystem Spec
11 May 2013   #3
huangpi

Windows 7 Home Premium (x64) Service Pack 1
 
 

Thanks cipley, I will run those
My System SpecsSystem Spec
.

Reply

 Multiple BSOD's occurring repeatedly between 30-60 mins after login




Thread Tools




Similar help and support threads
Thread Forum
no login prompt occurring on multiple PCs in same LAN on same day
Monday morning, three computers in the office seemed to be having the same issue. PC boots and Windows prompts for Ctrl+Alt+Del. After doing so, the Windows background image is still visible, mouse is active, but there is not prompt showing users and asking for password. I searched online and...
General Discussion
BSOD Occurring Multiple Times Per Day (no singular cause)
I have had my computer for almost a year now. During that time, I may have experienced the blue screen once or twice. As such, I did not find cause for concern just yet. However, after applying the free upgrade to Windows 10, I began to experience one or two blue screens per day. After about a...
BSOD Help and Support
BSOD occurring at login, browsing the internet. Error: 0x000000C4
Hello all! I'll try to format this post as best I can since I believe I'll be posting all relevant information. If you want to skip straight to the dump files of system crashes go straight to the bottom of the post. Detailed Description of Problem(s) I've gotten alot of BSOD errors lately...
BSOD Help and Support
Multiple BSOD every 30 mins
Hello, I have had a computer for over two years now, running with minimal issues. I completed a windows auto-update and suddenly now, im getting BSOD all over the place. I think its because the new update has made all my drivers conflict so I thought i had could resolve the issue by...
BSOD Help and Support
DNS client service repeatedly stopping and starting every 20 mins
Hi, first of all sorry if this is the wrong forum. I'm not sure if this is any cause for concern in any way, other than me just being paranoid, but in the past week (being someone who checks their even viewer probably a little too much) I noticed my DNS client service would randomly stop, start...
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:03.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App