Random BSOD while using computer. error 0x00000109

Code:

BugCheck D5, {fffff980035cae40, 0, fffff880043e01aa, 0}

*** WARNING: Unable to verify timestamp for usbfilter.sys
*** ERROR: Module load completed but symbols could not be loaded for usbfilter.sys

Could not read faulting driver name
Probably caused by : usbfilter.sys ( usbfilter+41aa )

Code:

Usual causes:  Device driver

This bugcheck a device driver referenced a region of memory which was already being freed.

Code:

fffff880`031af4a0  fffff880`04390db8 USBPORT!USBPORTBUSIF_UsbdBusInterfaceReference
fffff880`031af4a8  fffff880`04390dc8 USBPORT!USBPORTBUSIF_UsbdBusInterfaceDereference
fffff880`031af4b0  fffff880`04393244 USBPORT!USBPORTBUSIF_UsbdBusGetUSBDIVersion
fffff880`031af4b8  fffff880`043932e0 USBPORT!USBPORTBUSIF_UsbdBusQueryBusTime
fffff880`031af4c0  fffff880`04392170 USBPORT!USBPORTBUSIF_UsbdBusSubmitIsoOutUrb
fffff880`031af4c8  fffff880`04392e20 USBPORT!USBPORTBUSIF_UsbdBusQueryBusInformation
fffff880`031af4d0  fffff880`04392de4 USBPORT!USBPORTBUSIF_UsbdIsDeviceHighSpeed

We can see there are several USB related routines being called, so we are looking at potential USB related problems.

usbfilter.sysbelongs to your AMD USB Filter driver, it is most likely to be part of the AMD chipset, if a separate driver entry is not given on the AMD Support Page. If you can't find a driver from the AMD support page, then check your motherboard support page.

Code:

1: kd> lmvm usbfilter
start             end                 module name
fffff880`043dc000 fffff880`043e9000   usbfilter T (no symbols)           
    Loaded symbol image file: usbfilter.sys
    Image path: \SystemRoot\system32\drivers\usbfilter.sys
    Image name: usbfilter.sys
    Timestamp:        Tue Dec 22 08:26:22 2009 (4B3082AE)
    CheckSum:         0000DFD8
    ImageSize:        0000D000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Well I've been looking at the AMD support page that you linked but the only drivers I can find are for graphics and nothing else. The motherboard I have is N-Alvorix-RS880-uATX according to HP.com.

The original chipset drivers are on HP's website for the computer but I have downloaded and installed those and It does not seem to have fixed the problem. Is there a way to uninstall the chipset drivers and then re-install? If you can would this even work?

My Internet connection is not good tonight, here's the AMD Support Page for the motherboard and chipset search page: AMD Support Search.

Your motherboard documentation - HP and Compaq Desktop PCs - Motherboard Specifications, N-Alvorix-RS880-uATX (Alvorix) - c02560084 - HP Business Support Center

Alright i was able to find the chipset driver that included the filter for usb ports. Just installed it so im going to see if that solves the problem. God i really hope it does.

As it turns out, it did NOT fix the problem. Im getting so frustrated with this computer right now!! lol but if its not that then what can it be? any suggestions?

Since it bsod'd again, im just gonna post the latest dump file for your viewing pleasure . I am truly stumped here

Code:

BugCheck 109, {a3a039d89dc8b501, b3b7465ef046f333, fffff80000b96bb0, 6}

*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Probably caused by : ntoskrnl.exe ( nt_fffff80000b95000+1bb0 )

Okay, let's test the hard-drive throughly for any errors (skip any steps you have completed):

Run some hard-drive diagnostics and follow these steps:

• Hard Drive Diagnostic Procedure

Find your hard-drive manufacturer and run their tests.

Additional Tests:

• SeaTools for DOS | Seagate
• CrystalDiskInfo - Software - Crystal Dew World

Post a screenshot of Crystal Disk Info summary:

• Screenshots and Files - Upload and Post in Seven Forums

writhziden said:

If you have an SSD, make sure the following are up to date:

• SSD firmware
• BIOS Version
• Chipset Drivers
• Hard disk controller drivers/SATA drivers
• If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.

Check for any file system errors and bad sectors using Option #2 of:

• Disk Check

Use this command with Disk Check:

Code:

chkdsk C: /f /r