Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Frequent BSOD: Memory_Management (CUSTOM BUILT)

30 May 2013   #61
Whalen207

Windows 7 Professional 64-bit
 
 

Quote   Quote: Originally Posted by VistaKing View Post
Have you ran the memtest yet ?

:ADDED:

If you need to RMA the memory please click on the link below and fill it in

http://en.gskill.com/en/rma

Support Phone: 1-909-598-6860
Like I said, I'm running the tests tonight.
Thanks for the link, I hope I won't need it :)


My System SpecsSystem Spec
.
30 May 2013   #62
Whalen207

Windows 7 Professional 64-bit
 
 

Okay!

So, one of those little freakin' Ripjaws X 2x4GB DDR3-1600 F3-12800CL8D CL8-8-8-24 @ 1.50v / 800MHz (mouthful) sticks wasn't operating corretly, specifically the one slotted in slot B2. I've removed it, checked my timings and voltage (all at recommended levels, so it's no fault of mine) and am currently running on single-channel 1x4GB RAM with default settings. I've also clocked the i5 down to 4.0GHz, but that's unrelated.

Personally I've had problems with crappy RAM giving me errors just like this in the past (I was foolish enough to purchase PNY RAM in a hurry when building this PC off the bat) but figured if I was BSODing again it had to be something, anything else. But I suppose not.

If I could ask a few final favors of you guys:
1. tom982, could you instruct me once more to make sure all my windows files are uncorrupted?
2. VistaKing, can you RMA single sticks in a dual-channel kit?
3. centaur78 don't worry brah, Kaspersky is off my HDD. Thanks for the advice.

Otherwise, thank you so much for your kind advice. At least these BSODs got me around to updating my firmware on all these old SSDs and MOBOs :)

tl;dr VistaKing was right all along, and crappy RAM has fooled me twice so shame on me.
My System SpecsSystem Spec
30 May 2013   #63
Whalen207

Windows 7 Professional 64-bit
 
 

Ohoho, a new problem appears!



Something wrong with the GTX 670, I'll check it out. Not even detected by MOBO/UEFI BIOS or mentioned during boot processes so I'm assuming windows throws the Error 43 while looking for it..?
My System SpecsSystem Spec
.

31 May 2013   #64
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

Answer to your question . Can you RMA one of the RAMs on a Dual Channel memory ? Simple answer is No you can't . You will have to RMA both of the memory sticks .

For your graphic card issue download the driver from either the manufacture's website or from Nvidia website .
My System SpecsSystem Spec
31 May 2013   #65
Whalen207

Windows 7 Professional 64-bit
 
 

Yup, everything's fixed, just had to rollback the drivers and reseat the GPU.
<3 you guys, thanks for all the help!
My System SpecsSystem Spec
31 May 2013   #66
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

Glad you got your video card working .

Test your ram on every slot to see if its a bad ram or a bad memory slot .
My System SpecsSystem Spec
31 May 2013   #67
tom982

Microsoft Community Contributor Award Recipient

Windows 8.1 Pro x64
 
 

Quote   Quote: Originally Posted by Whalen207 View Post
Okay!

So, one of those little freakin' Ripjaws X 2x4GB DDR3-1600 F3-12800CL8D CL8-8-8-24 @ 1.50v / 800MHz (mouthful) sticks wasn't operating corretly, specifically the one slotted in slot B2. I've removed it, checked my timings and voltage (all at recommended levels, so it's no fault of mine) and am currently running on single-channel 1x4GB RAM with default settings. I've also clocked the i5 down to 4.0GHz, but that's unrelated.

Personally I've had problems with crappy RAM giving me errors just like this in the past (I was foolish enough to purchase PNY RAM in a hurry when building this PC off the bat) but figured if I was BSODing again it had to be something, anything else. But I suppose not.

If I could ask a few final favors of you guys:
1. tom982, could you instruct me once more to make sure all my windows files are uncorrupted?
2. VistaKing, can you RMA single sticks in a dual-channel kit?
3. centaur78 don't worry brah, Kaspersky is off my HDD. Thanks for the advice.

Otherwise, thank you so much for your kind advice. At least these BSODs got me around to updating my firmware on all these old SSDs and MOBOs :)

tl;dr VistaKing was right all along, and crappy RAM has fooled me twice so shame on me.
Try another SFC and post your CBS log, that'll tell us whether your files are okay:


SFC Scan

  1. Click on the Start button and in the search box, type Command Prompt
  2. When you see Command Prompt on the list, right-click on it and select Run as administrator
  3. When command prompt opens, copy and paste the following commands into it, press enter after each


    sfc /scannow


    Wait for this to finish before you continue


    copy %windir%\logs\cbs\cbs.log %userprofile%\Desktop\cbs.txt



  4. This will create a file, cbs.txt on your Desktop. Please attach this to your next post.



Tom
My System SpecsSystem Spec
31 May 2013   #68
Whalen207

Windows 7 Professional 64-bit
 
 

Windows is 100% uncorrupted,
and it's a bad stick.
Thanks!
My System SpecsSystem Spec
31 May 2013   #69
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

Upload the CBS.log
My System SpecsSystem Spec
Reply

 Frequent BSOD: Memory_Management (CUSTOM BUILT)




Thread Tools




Similar help and support threads
Thread Forum
Frequent Memory_Management BSOD
Hello, I have been having an issue with my desktop PC as of late. I keep getting a frequent memory_management BSOD after using my computer for several minutes. I use windows 7, 64. I have tried running the chkdsk /R command, the sfc /scannow command, the windows memory diagnostic tool for 8 passes...
BSOD Help and Support
Increasingly Frequent BSOD on recently built PC
Hi, I built a gaming PC about a month ago and since then I have had about 7 BSOD incidents, they appear to be happening more frequently and so far I have not been able to find a fix. 1st BSOD: About 1 week after building PC, I was probably playing a game 2nd BSOD: 4 days ago, playing Witcher...
BSOD Help and Support
New Custom Built PC BSOD- IRQL_NOT_LESS_OR_EQUAL
Hi everyone, Recently I built a new PC for gaming, however since then I have found that one of my RAM sticks was faulty so I removed it but now I've been getting BSOD's every day or so. I'm running Windows 7 Ultimate 64bit and the majority of my BSODs have the 'IRQL_NOT_LESS_OR_EQUAL' error. The...
BSOD Help and Support
Various BSoD's on Custom Built Computer
Hello, A small bit of history first: The computer in question is a custom build that I had been using for around 5 years with no problems at all. I then gave it to my sister after a complete format, and she has started to experience many BSoD's with it. Please note that only the internal...
BSOD Help and Support
BSOD Memory_Management Frequent 1a and a
I have been getting frequent BSODs, at seemingly any point. It can happen while the computer is just sitting idle, and sometimes it will be fine for hours. I have done a number of things to try and correct this, which I will attempt to outline below. Per the posting instructions, I have included...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:32.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App