BSOD 1e

I just ran the memtest, it did 2 passes and it said that "hardware programs were found" and to contact the computer manufacture.And after the 2 passes it booted the pc to normal mode and a bsod appeared really fast and now i'm in safe mode. What now?

After two passes it booted to normal mode at its own?

Was there any red line on the screen during memtest?

Yes it booted on its own
And No there wasn't

Run it again?

It should continue till you are not stopping it manually.

i ran it again and this is what i got now::
==============================================================================
Windows error Recovery

Windows failed to start. A recent hardware or software change might be the cause.

If windows files have been damaged or configured incorrectly, startup repair can help diagnose and fix the problem. If power was interrupet during startup choose start windows normally.
(Use the arrow keys to highlight your choice.)

Launch Startup Repair (recommended)
Start Windows Normally

===========================================================================================

What should i choose now??

Okay so i could not wait any more, and i run the startup repair and now its "attempting repairs"

How are you running memtest? It should not give you this message, as it runs from outside of windows.

Ok i finally ran the memtest, before i started something else

It's 23% and 5 lines appeared is that good or bad ??

5 lines in red? Take a camera snap and upload it.