Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Randoms BSOD, error 0x000000101

02 Jun 2013   #31
x BlueRobot

 

Okay, make sure your settings match my screenshot for my system:

Attachment 270899

Please follow the steps in Arc's link.


My System SpecsSystem Spec
.
03 Jun 2013   #32
goku1234567890

Windows 7 Ultimate N x32bit
 
 

Yeah my setting are exactly the same to yours except i didn't check on automatically restart.
My System SpecsSystem Spec
03 Jun 2013   #33
x BlueRobot

 

Okay good, what steps have you followed within Arc's link?
My System SpecsSystem Spec
.

05 Jun 2013   #34
goku1234567890

Windows 7 Ultimate N x32bit
 
 

OK my problem was solved by installing a new fresh copy of windows but there is a problem now there is a new BSOD 0x05 PAGE_FAULT_NONPAGED_AREA. And guess what this one occurring more than the previous BSOD.
My System SpecsSystem Spec
05 Jun 2013   #35
x BlueRobot

 

Okay, could you please post the new dumps using the same instructions as seen here ~ Blue Screen of Death (BSOD) Posting Instructions
My System SpecsSystem Spec
07 Jun 2013   #36
goku1234567890

Windows 7 Ultimate N x32bit
 
 

I am really sorry for the late reply. I noticed BSOD was caused by max payne 3. I was installing it and when it was left a tiny bit it BSOD after it I tried to open the folder and BSOD again happened i have deleted the folder but I still want to play the game. Here are the crash dumps if you want.
My System SpecsSystem Spec
08 Jun 2013   #37
x BlueRobot

 

Sorry for the late reply,

Test the CPU:Enable "Round off checking" before the test (see first post below tutorial).

Run some hard-drive diagnostics and follow these steps:Find your hard-drive manufacturer and run their tests.

Additional Tests:Post a screenshot of Crystal Disk Info summary:
Quote   Quote: Originally Posted by writhziden
If you have an SSD, make sure the following are up to date:
  • SSD firmware
  • BIOS Version
  • Chipset Drivers
  • Hard disk controller drivers/SATA drivers
  • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.
Check for any file system errors and bad sectors using Option #2 of:Use this command with Disk Check:

Code:
chkdsk C: /f /r
My System SpecsSystem Spec
Reply

 Randoms BSOD, error 0x000000101




Thread Tools




Similar help and support threads
Thread Forum
Two randoms BSOD last week
Hi, i've had two bsod suddenly, random. both times i wasn't doing really anything The files have the information in spanish from what i checked in the eventlog, for instance. Anyway would love any help you guys can give me. thanks beforehand
BSOD Help and Support
Randoms BSOD at any time since i bought my new computer
Hi guys ! I would like to know how i could fix my bsod problems . I had to reinstall windows right after receiving my new computer cause of bsod , and know it happens randomly , really annoying for a 2300€ computer .. i overclocked my CPU to 4.4Ghz but i think its really fine since i have a dark...
BSOD Help and Support
BSOD Windows blue-screens when 100% cpu, and some randoms
Hi Everyone. First of all, don't bite me when i type with some errors, my english in writing is not very good. I have built my pc 14 weeks ago. First i had a motherboard DOA, but was replaced in 2 day's. I'm not a beginner, have built a lot of custom computers, but with this problem i'm...
BSOD Help and Support
Windows7 randoms bsod
it's randomly crashes
BSOD Help and Support
BSOD after installing new Graphics Card, error 0x000000101
So, like the title says, I installed a new graphics card (MSI N670 PE 2GD5/OC) and since then my computer has been very unstable and is crashing a lot. The card is factory overclocked and I think it is faulty. Do you know of a way to underclock the card, so I can test if it is the overclock? ...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:36.
Twitter Facebook Google+