another blue screen

phippsy1980 · 05 Jun 2013

i got another bsod can anyone help me please

Dsprague · 05 Jun 2013

Code:

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff88000bf9000, 1, fffff88006a55bff, 0}

*** WARNING: Unable to verify timestamp for V0700Vid.sys
*** ERROR: Module load completed but symbols could not be loaded for V0700Vid.sys

Could not read faulting driver name
Probably caused by : V0700Vid.sys ( V0700Vid+17bff )

Followup: MachineOwner
---------

Its the same webcam driver as your last BSOD: Driver Reference Table - V0700Vid.sys

And it does not seem to be any more up to date than it was in your other thread:

Code:

kd> lmvm V0700Vid
start             end                 module name
fffff880`06a3e000 fffff880`06a9e2c0   V0700Vid T (no symbols)           
    Loaded symbol image file: V0700Vid.sys
    Image path: \SystemRoot\system32\DRIVERS\V0700Vid.sys
    Image name: V0700Vid.sys
    Timestamp:        Wed Sep 07 01:30:56 2011 (4E670190)
    CheckSum:         00066D53
    ImageSize:        000602C0
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Again the site to get the driver updates is here: Creative Worldwide Support

If there are no driver updates then you may want to look into getting yourself a new webcam because there may be a problem with your current one.

x BlueRobot · 05 Jun 2013

Code:

BugCheck 50, {fffff88000bf9000, 1, fffff88006a55bff, 0}

*** WARNING: Unable to verify timestamp for V0700Vid.sys
*** ERROR: Module load completed but symbols could not be loaded for V0700Vid.sys

Could not read faulting driver name
Probably caused by : V0700Vid.sys ( V0700Vid+17bff )

Code:

Usual causes:  Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus,  Device driver, NTFS corruption, BIOS

This bugcheck suggests that a page fault occurred within the address range of the a non-paged pool region, the kernel virtual memory address could not be translated into a physical memory address.

Code:

4: kd> lmvm V0700Vid
start             end                 module name
fffff880`06a3e000 fffff880`06a9e2c0   V0700Vid T (no symbols)           
    Loaded symbol image file: V0700Vid.sys
    Image path: \SystemRoot\system32\DRIVERS\V0700Vid.sys
    Image name: V0700Vid.sys
    Timestamp:        Wed Sep 07 06:30:56 2011 (4E670190)
    CheckSum:         00066D53
    ImageSize:        000602C0
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

The issue seems to be caused by your Creative Technologies Video Capture driver, please update the driver from here ~ Creative Worldwide Support

phippsy1980 · 05 Jun 2013

its strange because i installed the newest driver from the site i just downloaded from the site again and it says newest driver is already installed

x BlueRobot · 06 Jun 2013

If you have the latest driver, then you may need to consider getting a new webcam.

Have you doing a clean installation of the latest driver? Remove the driver and then install it again.