Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD - Page fault in nonpaged area

06 Jun 2013   #1

Win 7 ult x64
BSOD - Page fault in nonpaged area

Just done a clean install of windows to solve an issue I had with graphics drivers crashing then recovering this doesnt seem to have helped as screen has frozen and NOT recovered twice now and just had this BSOD:Page fault in nonpaged area. Wasnt fast enough to catch codes on screen but SF diagnostic files attached to post. This fault doesnt seem to happen when vid card or system is under load normally when just browsing. Thnx in advance for any help!!!.If you need any more info just let me know!

My System SpecsSystem Spec
07 Jun 2013   #2

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit

System Optimisers

Please remove the following software:
Start Menu\Programs\TuneUp Utilities 2012	Public:Start Menu\Programs\TuneUp Utilities 2012	Public
Start Menu\Programs\TuneUp Utilities 2012\All functions	Public:Start Menu\Programs\TuneUp Utilities 2012\All functions	Public
This software is a known cause of BSOD's. The windows 7 operating system does not require these registry cleaning software. They often tune-down rather than tune-up and can wreck the OS beyond repair. Microsoft have improved Windows 7 significantly and it is much better at organising and optimising itself than its predecessors. Check this, this and this thread for evidence.

If you feel the need to use a registry cleaning or optimisation software, most of us recommend the use of CCleaner - PC Optimization and Cleaning - Free Download but make sure you back up the registry before making letting ccleaner delete anything.10 Tips on How to Properly Maintain Your Computer

Security App

Crashes indicate AVG and Zone Alarm being a possible cause. Remove and replace with Microsoft Security Essentials to see if it provides more stability. Uninstallers (removal tools) for common antivirus software. Microsoft Security Essentials and Malwarebytes are recommended from a strict BSOD perspective. They do not cause blue screens on the system as other AV products do.

Microsoft Security Essentials, Free antivirus for windows and Malwarebytes Anti-Malware Free

information   Information
  • Do not start the free trial of MalwareBytes, unselect that option when prompted.

  • Update and make full scans with both separately.

Please run these tests and report back the results

1. SFC /scannow to check windows for corruption - SFC /SCANNOW Command - System File Checker
2. Disk check for errors on the hard drive - How to Run Disk Check in Windows 7
3. Troubleshoot applications by a clean boot - Troubleshoot Application Conflicts by Performing a Clean Startup
4. Memtest86+ paying close attention to part 3 - RAM - Test with Memtest86+
5. Hard drive test from HDD mfg website - Hard Drive Diagnostic Procedure
6. Install all updates including Service Pack 1 for Windows 7 - Learn how to install Windows 7 Service Pack 1 (SP1)

*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

Invalid system memory was referenced.  This cannot be protected by try-except,
it must be protected by a Probe.  Typically the address is just plain bad or it
is pointing at freed memory.
Arg1: ffffba8010c053f8, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffff8000309b1da, If non-zero, the instruction address which referenced the bad memory
Arg4: 0000000000000007, (reserved)

Debugging Details:

Could not read faulting driver name
TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2

WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff800032bd0e0
GetUlongFromAddress: unable to read from fffff800032bd198
 ffffba8010c053f8 Nonpaged pool

fffff800`0309b1da f00fba3100      lock btr dword ptr [rcx],0







TRAP_FRAME:  fffff8800a2952c0 -- (.trap 0xfffff8800a2952c0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000001 rbx=0000000000000000 rcx=ffffba8010c053f8
rdx=fffffa800e497801 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8000309b1da rsp=fffff8800a295450 rbp=0000000000000000
 r8=fffff8800a2954d4  r9=fffff8a00eb24af8 r10=fffffa801113cae0
r11=0000000000000000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei ng nz na po nc
fffff800`0309b1da f00fba3100      lock btr dword ptr [rcx],0 ds:ffffba80`10c053f8=????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80003104849 to fffff80003085740


fffff800`0309b1da f00fba3100      lock btr dword ptr [rcx],0


SYMBOL_NAME:  nt!ExAcquireFastMutex+1a

FOLLOWUP_NAME:  MachineOwner


IMAGE_NAME:  ntkrnlmp.exe


FAILURE_BUCKET_ID:  X64_0x50_nt!ExAcquireFastMutex+1a

BUCKET_ID:  X64_0x50_nt!ExAcquireFastMutex+1a

Followup: MachineOwner
My System SpecsSystem Spec
07 Jun 2013   #3

Win 7 ult x64

Thnx for the quick reply m8, I`ll start runnin thru the suggestions u made over the w/end and post results when I`m done.Thnx Craig
My System SpecsSystem Spec

14 Jun 2013   #4

Win 7 ult x64

Solved, stripped dwn system n swapped out all major parts ,turned out to be faulty vid card. Thnx 4 all your help guys.
My System SpecsSystem Spec
14 Jun 2013   #5

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit

Thanks for letting us know.

Tip   Tip
  • If your problem is solved please use the Mark this thread as solved link at the top of your thread or down on the left corner.

My System SpecsSystem Spec

 BSOD - Page fault in nonpaged area

Thread Tools

Similar help and support threads
Thread Forum
BSOD Page fault in nonpaged area
Hello, I replaced my old HDD for an SSD. After turning on AHCI-mode in the BIOS and formatting the new SSD, I installed Windows 7 Ultimate x64 SP1. Now that Windows installation is complete, I installed all the drivers for my hardware. Since then, after starting Windows a BSOD appears with the...
BSOD Help and Support
BSOD: page fault in nonpaged area
Hello, I bought a new computera last week and it has been throwing BSODs at random times, around 2-3 times a week, with no apparent reason. The error I get is PAGE_FAULT_IN_NONPAGED_AREA, win32k.sys. I'm uploading the diagnostics I got from the SD diagnostic tool. Please, I'm desperate, I...
BSOD Help and Support
Page Fault in Nonpaged Area BSOD (Among a few others)
Hello, for the past several months now my computer has been getting many BSOD messages along the lines "Page fault in nonpaged area" and a few others who's descriptions escape me at the moment. It has gotten to the point where I can barely get anything done anymore because of the BSODs or the...
BSOD Help and Support
BSOD Page Fault in Nonpaged Area
Hi All, First post here so hope I have done all correctly! Had hoped to catch up on my workload today but windows decided otherwise! Have had multiple BSOD. Mainly Page Fault in Nonpaged Area but also others such as Apc Index Mistmatch. I am getting BSOD on every boot. I literally cannot use...
BSOD Help and Support
BSOD - page fault in nonpaged area - pls pls help
I have just built my dream custom PC Windows 7 x64 Ultimate Ga-x58a-ud3r MB and 6GB corsair ram Gtx 460 SLI SSD (ocz sata 2) (boot) none raid SSD (crucial sata 3) Samsung F3 1TB (storage) 850w Corsair PSU.
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:24.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App