Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD every 10 minutes

07 Jun 2013   #1
allrounderiam

windows 7 ultimate x64
 
 
BSOD every 10 minutes

i get the BSOD every 15 minutes. i have attached the zip folder. please help


My System SpecsSystem Spec
.
08 Jun 2013   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Your crash dumps are not showing any finite probable cause.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If memtest comes free from errors, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

information   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.

warning   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.

Tip   Tip

Let us know the results, with the subsequent crash dumps, if any. Post it following the Blue Screen of Death (BSOD) Posting Instructions.
---------------------------------------------------------------------------
BSOD ANALYSIS:
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 109, {a3a039d89f0e0654, b3b7465ef18c43fe, fffff80000b96bb0, 6}

*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Probably caused by : ntoskrnl.exe ( nt_fffff80000b95000+1bb0 )

Followup: MachineOwner
---------

3: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

CRITICAL_STRUCTURE_CORRUPTION (109)
This bugcheck is generated when the kernel detects that critical kernel code or
data have been corrupted. There are generally three causes for a corruption:
1) A driver has inadvertently or deliberately modified critical kernel code
 or data. See http://www.microsoft.com/whdc/driver/kernel/64bitPatching.mspx
2) A developer attempted to set a normal kernel breakpoint using a kernel
 debugger that was not attached when the system was booted. Normal breakpoints,
 "bp", can only be set if the debugger is attached at boot time. Hardware
 breakpoints, "ba", can be set at any time.
3) A hardware corruption occurred, e.g. failing RAM holding kernel code or data.
Arguments:
Arg1: a3a039d89f0e0654, Reserved
Arg2: b3b7465ef18c43fe, Reserved
Arg3: fffff80000b96bb0, Failure type dependent information
Arg4: 0000000000000006, Type of corrupted region, can be
    0 : A generic data region
    1 : Modification of a function or .pdata
    2 : A processor IDT
    3 : A processor GDT
    4 : Type 1 process list corruption
    5 : Type 2 process list corruption
    6 : Debug routine modification
    7 : Critical MSR modification

Debugging Details:
------------------


FAULTING_IP: 
nt_fffff80000b95000+1bb0
fffff800`00b96bb0 48895c2408      mov     qword ptr [rsp+8],rbx

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT

BUGCHECK_STR:  0x109

PROCESS_NAME:  System

CURRENT_IRQL:  0

STACK_TEXT:  
fffff880`02662498 00000000`00000000 : 00000000`00000109 a3a039d8`9f0e0654 b3b7465e`f18c43fe fffff800`00b96bb0 : nt!KeBugCheckEx


STACK_COMMAND:  kb

FOLLOWUP_IP: 
nt_fffff80000b95000+1bb0
fffff800`00b96bb0 48895c2408      mov     qword ptr [rsp+8],rbx

SYMBOL_NAME:  nt_fffff80000b95000+1bb0

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt_fffff80000b95000

IMAGE_NAME:  ntoskrnl.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  5149a99c

FAILURE_BUCKET_ID:  X64_0x109_6_nt_fffff80000b95000+1bb0

BUCKET_ID:  X64_0x109_6_nt_fffff80000b95000+1bb0

Followup: MachineOwner
---------
My System SpecsSystem Spec
Reply

 BSOD every 10 minutes




Thread Tools




Similar help and support threads
Thread Forum
2 minutes to boot to desktop and minutes more fot hard drive activity
ever since I got the laptop it takes almost 2 minutes to boot to the desktop. It then continues to show hard drive read activity without blinking for 6+ minutes. What tests can I run to find out the cause? this happened since the first boot times and even after factory resets. ...
Performance & Maintenance
BSOD after a few minutes (5 to 55 minutes) with Samsung SSD 840 EVO
Hi. I have successfully cloned my existing OS over to the SSD 840 EVO using Samsung magician. My OS boots fine with the SSD 840 EVO but crashes several minutes after startup. Crashes can happen from 5 to 50+ minutes after start up. The crashing process happens slowly, starting with the mouse...
BSOD Help and Support
BSOD every few minutes
hi, i keep getting BSOD every few minutes ranging from start up to 30 mins.im getting different reports all the time.Can you please help. im using HP laptop. i have tried system restore but still the same.so i have installed a fresh win7 sp1 64bit. any help would be much appreciated....
BSOD Help and Support
BSOD every 10 minutes
I have been getting the BSOD every 10 minutes from last few days. I get the following error: Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 1033 Additional information about the problem:
BSOD Help and Support
New Rig BSOD within 15 minutes
Dear All, I just built a Rig (after nearly 8 years of my last rig) with the following specs: i7 950 (Stock 3.07) Kingston HyperX 2000 CL9 @2133 (Stock) 6GB (Triple Channel) Asus P6X58D-E Corsair HX1000 Galaxy GTX480 Super Overclock x2 SLI (but currently using one only to setup system,...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:55.
Twitter Facebook Google+