Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: New Post Old Machine BSOD Randomly

17 Jun 2013   #1

Win 7 Ultimate x64
New Post Old Machine BSOD Randomly

As per posting instructions I will load the Diagnostic Tool Results.

I havent had a problem with this machine for a while. I initially had 8Gbs Ram but 2 of the Chips started Acting so I removed them.

Any and All help will be appreciated.

OS: Win 7 Ultimate x64
CPU: AMD Athon II X3 Processor
Motherboard: Gigabyte MA770T-UD3
Memory:Ballistix DDR 3 PC -12800 (2 x 2GB)
Graphics Card(s): EVGA Geforce 8400GS

Hard Drives
Cooling: COOLER MASTER Hyper TX3 RR-910-HTX3-G1

My System SpecsSystem Spec
17 Jun 2013   #2

Microsoft Community Contributor Award Recipient

Windows 7 Professional 64bit


Firstly please install Windows Service Pack 1 as it will increase system stability.
Then once installed please run Windows Updates and install all the latest updates.

From your logs:

*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
Use !analyze -v to get detailed debugging information.
BugCheck 24, {1904fb, fffff880029ca028, fffff880029c9890, fffff88001218388}
Probably caused by : Ntfs.sys ( Ntfs!NtfsPreRequestProcessingExtend+28 )
Followup: MachineOwner
2: kd> !analyze -v
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
Usual causes: Disk corruption, insufficient physical memory, Device driver, Indexing, Resident antivirus, backup, defrag programs, Disk/Drive failing/failure

Avast Anti-Virus is causing issues:

Drivers: aswSnx.SYS and aswSP.SYS
Refers to: Avast Anti-Virus
Please remove Avast from your system: avast! Uninstall Utility | Download aswClear for avast! Removal

As an alternative, please download and install:

Microsoft Security Essentials.
Recommended from a strict BSOD perspective, compatibility & stability
compared to other antiviruses/internet security software.

Note   Note
Once downloaded, update and run a full system scan

Also your video drivers need updating:

Driver: nvlddmkm.sys
Dated: Thu Aug 30 16:50:16 2012
Refers to: Nvidia Video Drivers
Install the latest driver, Choose Option 2: Drivers - Download NVIDIA Drivers

Driver: MpFilter.sys
Refers to: Microsoft Windows AntiMalware protection system
See if there is a windows update for this driver.

Run these tests:

SFC to check the integrity of all Windows 7 system files:
  • Click on Start > Type in search cmd
    Right-click cmd after results are displayed and Run as Administrator
    Type SFC /scannow at the prompt
    (Note: There is a space between SFC and /scannow)
SFC Tutorial

Note   Note
Select option two. If any problems are found, run the scan 3 times and immediately
reboot the computer after each scan.

Also run chkdsk in an elevated command prompt in order to check for file system errors and bad sectors on your HDD:
  • Click on Start>Type in search cmd
  • Right click cmd and Run as Administrator
  • At the command prompt please type: chkdsk /f/r
    (There is a space between chkdsk and /f/r)
Chkdsk Tutorial

Post back any results/observations.


My System SpecsSystem Spec

 New Post Old Machine BSOD Randomly

Thread Tools

Similar help and support threads
Thread Forum
PC randomly doesn't boot after sleep + no POST + BSOD
Edit: I might have found the culprit of the BSOD, so I only need help with the POST/sleep issue specifically (main thread) -- I'm having a series of problems I'm just losing my head over. 1) First off, I never had a single stability problem while the PC is running, in fact it's quite new...
BSOD Help and Support
New Build Machine BSOD 9F (driver power state) errors randomly
Hi New member - please be gentle if I haven't followed the correct procedures Okay I rebuilt my PC completely following a mobo failure, retaining the hard drives; I was really impressed Win7 Ult x64 booted straight into the desktop. I removed old mobo drivers, added new ones Had a few glitched...
BSOD Help and Support
BSOD with ntoskrnl.exe after POST, randomly when using.
Hello. I have a Gateway M2624u laptop that I'm trying to fix for a friend. She stated that it was slow, so I reinstalled the OS (Vista Home Premium x64). It was working fine for the two nights I had it, but she then said it started blue screening as soon as it loaded Vista's loading screen. It's...
BSOD Help and Support
BSOD randomly event id 1001 on new machine
Hello, I have a new problem. I have a workstation that I just setup and the user is reporting BSODs on the system randomly. I've done all the standards stuff: - Updated to the newest drivers from the vendor's web site - Removed and reinstalled anti-virus - Run chkdsk on the system volume...
BSOD Help and Support
Display and Machine Randomly freezes (No error messages or BSOD)
Hello everyone! I am not sure if this is the correct forum for this post, but my issue does deal largely with my display. If so I apologize in advance and ask to be directed to the correct forum. I have searched the boards for similar issues and I have tried their approaches but it has not...
General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:12.
Twitter Facebook Google+