New
#61
It seems like a bad slot, here's a quick test for you to try, place one RAM stick in the slot which seems to be bad, and then try and boot the computer.
Memtest86+ has no memory limitations at all.
It seems like a bad slot, here's a quick test for you to try, place one RAM stick in the slot which seems to be bad, and then try and boot the computer.
Memtest86+ has no memory limitations at all.
you can not use this option for see if the pc work or not, because you have a slot define, for each memory stick, what you added on the mother board, exemple if you take a memory stick and set up on the fist slot the pc work not he ringing just and you can just shutdown manualy the pc. if you take the same memory stick and set on the slot 2, the pc work, you take again the same memory stick on the slot 3 ,same action ,about the slot1.
1 ram slot 3-1
2ram slot 3-3 3-1
4ram slot 3-1 3-4 3-3 3-6
6ram all slot
and this is the order => right to the left (pross at right)3-2 3-1 3-4 3-3 3-6 3-5
i have actualy the pass 12 about memetest86 completed with 0 error.
i can stop memtest ?
and folow the step for furmark ...
/////////////////////////////////////edit///////////////////////
i have stop memtest (15 pass)
i have make a check disk
a : sfc /scannow
instal a new driver video the 320.49
Last edited by Bikette; 16 Jul 2013 at 06:37.
Okay, so it's not booting in Slot 1, and it fairly clear you don't have bad RAM sticks but most likely a bad DIMM slot.
hummmmm i have a other problem when i active sli the driver crash i think (driver crash/bssod) no ?
Crash dump directory: C:\Windows\Minidump
Crash dumps are enabled on your computer.
On Wed 17/07/2013 12:07:56 GMT your computer crashed
crash dump file: C:\Windows\Minidump\071713-24414-01.dmp
This was probably caused by the following module: nvlddmkm.sys (nvlddmkm+0x1D9F7F)
Bugcheck code: 0x7F (0x8, 0x80050031, 0x6F8, 0xFFFFF8800589DF7F)
Error: UNEXPECTED_KERNEL_MODE_TRAP
file path: C:\Windows\system32\drivers\nvlddmkm.sys
product: NVIDIA Windows Kernel Mode Driver, Version 320.49
company: NVIDIA Corporation
description: NVIDIA Windows Kernel Mode Driver, Version 320.49
Bug check description: This bug check indicates that the Intel CPU generated a trap and the kernel failed to catch this trap.
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: nvlddmkm.sys (NVIDIA Windows Kernel Mode Driver, Version 320.49 , NVIDIA Corporation).
Google query: NVIDIA Corporation UNEXPECTED_KERNEL_MODE_TRAP
Could you please upload the dump file with - Blue Screen of Death (BSOD) Posting Instructions
Do you get any problems with SLI disabled?
SLI enabled or not my pc crash freeze ... i have remove one same probleme, invert, same, ...i don't watch where is the probleme, i'm stupefect by this probleme
Code:BugCheck 7F, {8, 80050031, 6f8, fffff8800589df7f} *** WARNING: Unable to verify timestamp for nvlddmkm.sys *** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys Probably caused by : nvlddmkm.sys ( nvlddmkm+1d9f7f )Code:Usual causes: Memory corruption, Hardware (memory in particular), Overclocking failure, Installing a faulty or mismatched hardware (especially memory) or a failure after installing it, 3rd party firewall, Device drivers, SCSI/network/BIOS updates needed, Improperly seated cards, Incompatible storage devices, Overclocking, Virus scanner, Backup tool, Bad motherboard, Missing Service PackOkay, we're back with the nVidia graphics card driver, which leading me to three possibilities: graphics card driver, graphics card or a faulty PCI/PCIe slot on the motherboard.Code:7: kd> lmvm nvlddmkm start end module name fffff880`056c4000 fffff880`061a9000 nvlddmkm T (no symbols) Loaded symbol image file: nvlddmkm.sys Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys Image name: nvlddmkm.sys Timestamp: Fri Jun 21 10:06:16 2013 (51C41788) CheckSum: 00AB87FF ImageSize: 00AE5000 Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Firstly, remove the driver completely from your system, and allow the generic Windows VGA driver to install itself, by following these instructions. Stay with the VGA driver for a few days, and report any crashes.
- Start Type: Device Manager
- Expand Display Adapters
- Right-Click Driver Name, Uninstall
- Reboot
- Run Driver Sweeper
- Reboot
Driver Sweeper will scan for any left over files from the old driver, old driver files can cause conflicts with new driver installations. Create a System Restore point beforehand, in case any problems or issues arise.
Driver Sweeper:
Code:7: kd> .trap fffff880`03170f30 NOTE: The trap frame does not contain all registers. Some register values may be zeroed or incorrect. rax=0000000000000087 rbx=0000000000000000 rcx=fffff8800318d028 rdx=000000000000e824 rsi=0000000000000000 rdi=0000000000000000 rip=fffff8800589df7f rsp=fffff8800318cff0 rbp=fffff8800318d010 r8=0000000000000020 r9=fffff8800318d0c0 r10=fffff8800587ce68 r11=fffff8800318d228 r12=0000000000000000 r13=0000000000000000 r14=0000000000000000 r15=0000000000000000 iopl=0 nv up ei pl nz na pe nc nvlddmkm+0x1d9f7f: fffff880`0589df7f e8401dfeff call nvlddmkm+0x1bbcc4 (fffff880`0587fcc4)
The exception which has happened in the kernel, is a Double Fault, the processor was handling a exception caused the the nVidia graphics card driver, but during the processing, a another exception has occurred.
it's ok now i re install the laste driver ?
i have fly this line "Stay with the VGA driver for a few days" escuse me
Last edited by Bikette; 18 Jul 2013 at 11:29.
If it doesn't crash within a few days with the VGA driver, then you may install the nVidia graphics card driver. Otherwise, if it does crash, then you have one of the other two possibilities.