Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD using Labview driver usbser.sys

20 Feb 2015   #11

Thank you

I had to register to the forum to replay to your thread.
I've been struggling for a week with this BSOD without a clue how to fix it.
Changing VISA read to synchronous did the job.

Thank you!

My System SpecsSystem Spec

 BSOD using Labview driver usbser.sys

Thread Tools

Similar help and support threads
Thread Forum
BSOD using Labview. Likely device/driver related
Hello, I operate a scientific instrument using Labview. I have 4 measurement devices all using USB connection. The program runs for ~24 hrs and will often terminate early with a BSOD. I am hoping to identify what device is causing the problem.
BSOD Help and Support
Hi All. Hope someone can help as I'm kinda running out of ideas. I have a new PC build with Win 7 x64 running in a retail environment. Once every few days the system blue screens often when its not even being used. System has latest BIOS and device drivers. Have run a memtest , check disk,...
BSOD Help and Support
usbser.sys driver not working on Windows 7
We have developed custom USB 1.1 CDC class device, and we are using usbser.sys driver which comes with the Windows to test our device. We have written small application along with the USB decoding section of the design, it basically receives lower case letter which sent from Host PC with the help...
BSOD usbser.sys
Hy everyone, I have a little problem with my laptop running Labview2011. I get a BSOD randomly. On Tue 26.11.2013 13:46:11 GMT your computer crashedcrash dump file: C:\Windows\Minidump\112613-28548-01.dmpThis was probably caused by the following module: usbser.sys (0xFFFFF880079A8161)...
BSOD Help and Support
Driver causing BSOD while running Labview need help debugging
BSOD running Labview for long periods of time. The error seems to be tied to a USB driver error. I am unable to determine what driver is causing it. I will post the dump.dmp files. Pretty much need help in debugging the crashes. The devices being used are an LDT-5940C, Coherent PowerMAX USB...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:22.
Twitter Facebook Google+