Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD using Cubase 7, Error:APC_INDEX_MISMATCH, Address:ntoskrnl.exe+75

27 Jun 2013   #1

Windows 7 64bit
BSOD using Cubase 7, Error:APC_INDEX_MISMATCH, Address:ntoskrnl.exe+75

Hello and thank you for your help.

I have been receiving a lot of crashes lately. Thought it was the HD so replaced it. Still happening.

I have 3 cards in my system; GTX560ti for graphics, Firewire card for Steinberg MR816csx audio interface, and and UAD-2 processing card for audio plugins.

I thought it was a conflict with my devices and tried to smooth them all out, then I got this last error which is new.

Any ideas?

thanks you in advance!


My System SpecsSystem Spec
27 Jun 2013   #2

Windows 10 64 bit

I have a studio using Sonar X2. I used to have a firewire device (Focusrite Saffire Pro 40) but had issues with it and replaced it with a USB connected Roland Octa-Capture (and a backup MAudio Fastrack Ultra 8R).

I didn't look at your zip file, but the APC Index Mismatch is GENERALLY a driver issue. Did it work OK (never crash) and recently start? or has it always had crash problems?

If it is a recent problem, what has been recently updated? Especially hardware drivers.
My System SpecsSystem Spec

 BSOD using Cubase 7, Error:APC_INDEX_MISMATCH, Address:ntoskrnl.exe+75

Thread Tools

Similar help and support threads
Thread Forum
Constant BSOD, ntoskrnl.exe, mainly when running Cubase
Hey all, I've been pulling my hair out trying to figure out why I've been getting BSOD crashes lately. I've mainly noticed it while running Cubase 7.5 lately. I have a USB audio interface attached (Focusrite), and I have reinstalled/updated the driver, but it hasn't helped. I've gotten...
BSOD Help and Support
Random BSOD error driver ntoskrnl.exe (address ntoskrnl.exe+74ec0)
Hey guys so I've been getting some random BSOD errors every few days or so. I usually leave my computer on when I am at work or sleep and either when I come home or wake up my computer is off. So I turn it on and it says that the computer didn't shut down properly when I start up. I downloaded...
BSOD Help and Support
BSOD on wake-up error 0x00000124, driver hal.dll, address ntoskrnl.exe
Generous experts, I am getting somewhat random, though more often on "wake-up" BSOD. It seems that it may be related to the cpu, as the event view states: A fatal hardware error has occurred. Reported by component: Processor Core Error Source: Machine Check Exception Error Type: Cache...
BSOD Help and Support
BSOD , error 0x1000007e, caused by Wdf01000.sys, address ntoskrnl.exe
For the past 3 weeks, I have been receiving blue screens serval times. :sarc: Each time, the caused of the error reports has been "Wdf01000.sys" and address at ntoskrnl.exe+74a90. I've attached 3 dmp files to this post. Any help is appreciated! Thanks.
BSOD Help and Support
BSOD random error 0x00000124, hal.dll at address ntoskrnl.exe+7cc40
I keep getting a random BSOD, I get it a lot in Lightroom 3 but have gotten the same error doing nothing. *** STOP: 0x00000124 (0x0000000000000000, 0xfffffa80053d5028, 0x00000000b2000040, 0x0000000000000800) *** hal.dll - Address 0xfffff80002c15a3b base at 0xfffff80002c03000 DateStamp ...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:51.
Twitter Facebook Google+