Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD after attempting to change from extended display to duplicate

09 Jul 2013   #1

Windows 7 Professional 64 bit
BSOD after attempting to change from extended display to duplicate

I attempted to change my display configuration from extended display to duplicate display, by pressing "window button" + "P". The screen immediately turned blue once I pressed "window button" + "P".

Attached are the requested files.

Thank you.

My System SpecsSystem Spec
10 Jul 2013   #2
Capt.Jack Sparrow

Windows 7 Ultimate - 64-bit | Windows 8 Pro - 64-bit

Hello there!

There are a couple of things we need to do. First update the Intel Matrix Storage Manager driver. Then remove the display drivers and install an updated driver.

Run Hardware Diagnostic (RAM & Hard drive)

Also consider updating your SSD Firmware as well.

The pool is already corrupt at the time of the current request.
This may or may not be due to the caller.
The internal pool links must be walked to figure out a possible cause of
the problem, and then special pool applied to the suspect tags or the driver
verifier to a suspect driver.
Arg1: 0000000000000003, the pool freelist is corrupt.
Arg2: fffff8a00f78b130, the pool entry being checked.
Arg3: ffff000100000001, the read back flink freelist value (should be the same as 2).
Arg4: fffff8a00f78b130, the read back blink freelist value (should be the same as 2).

Debugging Details:






LAST_CONTROL_TRANSFER:  from fffff800033b56ea to fffff80003282c00

fffff880`0391d868 fffff800`033b56ea : 00000000`00000019 00000000`00000003 fffff8a0`0f78b130 ffff0001`00000001 : nt!KeBugCheckEx
fffff880`0391d870 fffff800`033b64f1 : 00000000`00000000 fffff8a0`0f146820 fffff8a0`12018250 00000000`00000090 : nt!ExDeferredFreePool+0xc96
fffff880`0391d900 fffff800`03244cd2 : 00000000`00000000 fffff8a0`0f146c58 fffffa80`74536d4d fffff800`0357b116 : nt!ExFreePoolWithTag+0x411
fffff880`0391d9b0 fffff800`035251bb : fffffa80`155421d0 00000000`00000011 00000000`0008c081 fffffa80`11c15430 : nt!MiDeleteSegmentPages+0x112
fffff880`0391da80 fffff800`032cf311 : fffffa80`155421d8 00000000`00000001 00000000`00000000 00000000`00000631 : nt!MiSegmentDelete+0x7b
fffff880`0391dac0 fffff800`032cf1d5 : 00000000`00000000 00000000`00000080 fffffa80`0ca72040 fffffa80`00000012 : nt!MiProcessDereferenceList+0x131
fffff880`0391db80 fffff800`03520ede : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!MiDereferenceSegmentThread+0x10d
fffff880`0391dc00 fffff800`03273906 : fffff880`009b3180 fffffa80`0ca8f500 fffff880`009be0c0 00000000`00000000 : nt!PspSystemThreadStartup+0x5a
fffff880`0391dc40 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16


fffff800`033b56ea cc              int     3


SYMBOL_NAME:  nt!ExDeferredFreePool+c96

FOLLOWUP_NAME:  Pool_corruption

IMAGE_NAME:  Pool_Corruption


MODULE_NAME: Pool_Corruption

FAILURE_BUCKET_ID:  X64_0x19_3_nt!ExDeferredFreePool+c96

BUCKET_ID:  X64_0x19_3_nt!ExDeferredFreePool+c96

Followup: Pool_corruption
My System SpecsSystem Spec
26 Jul 2013   #3

Windows 7 Professional 64 bit

I updated the display driver, SSD, and Intel Matrix Storage Manager driver.
I did this a week ago, and am trying to find time to learn to conduct the hardware diagnostic.
I haven't had any problems thus far, but will return with results from the hardware diagnostic.

Thank you for your help.
My System SpecsSystem Spec


 BSOD after attempting to change from extended display to duplicate

Thread Tools

Similar help and support threads
Thread Forum
Extended Display
Hi, Anyone know how to use extended display on a Toshiba C660D, also can the main screen and second screen be used independently of each other. Thank You Uniman
Graphic Cards
"Page Failed to Load" error attempting to change my Win7-64bit display
Win 7-64 on Gateway FX6860 i7 system 8gm ram tons of HD space. ======================== Got "Page Failed to Load" error attempting to change my Win7-64bit display resolution. This used to work, but no more ( don't know what might have caused it) I ran "sfc /scannow". SFC reported that...
BSOD Help and Support
Extended display over 3 monitors
Would appreciate some help on this one. Sorry for the long thread but wanted to provide some context. Objective I would like to have an extended desktop over 3 monitors (different windows on different displays). I've seen it done, I know its possible. But I have tried and failed. Looking...
Graphic Cards
W7 Extended Display - should be ez, but its not
W7 Pro 64bit ATI HD Radeon 5770 with latest catalyst software & Drivers (4/27/11) 6 GB Mem Intel core 2cpu 6600 @2.4Ghz Display #2: Phillips 202p73, good quality CRT Monitor ---- resolution: 1920 x 1440 @85hz Display #1: Sony Bravia HDTV attached via HDMI cable ---- resolution: I...
Graphic Cards
Extended Display
I am running Windows 7 Ultimate 64 bit. When I right click and go to screen resolution it says that my Sharp LCD TV is number 1 and my Viewsonic monitor is number 2. Beside multiple displays it says "Extend these displays" which is what I want. My Viewsonic monitor is set as my main...
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 23:31.
Twitter Facebook Google+