New
#11
It ran with no BSOD for more than 5 hours
It ran with no BSOD for more than 5 hours
Okay, keep it running for at least 24 hours in total.
I started the verifier and it seemed fine but when i go to run something like PCXS2 it gave me a BSOD which said something about the WDF.sys
BSOD Analysis:
Code:BugCheck 10D, {5, 0, 1202, fffffa801022e830} *** WARNING: Unable to verify timestamp for MijXfilt.sys *** ERROR: Module load completed but symbols could not be loaded for MijXfilt.sys Probably caused by : MijXfilt.sys ( MijXfilt+363a )It seems that a incorrect handle type was given to a object method, or a incorrect handle was referenced with the object method. A object refers to a system resource.Code:Usual causes: Device driver, Memory
Your MotioninJoy simulate Xbox 360 controller (virtual Xinput device) driver seems to a possible cause, please update the driver from here - MotioninJoy simulate Xbox 360 controller(virtual Xinput device) | MotioninJoyCode:2: kd> lmvm MijXfilt start end module name fffff880`0c192000 fffff880`0c1b4000 MijXfilt T (no symbols) Loaded symbol image file: MijXfilt.sys Image path: \SystemRoot\system32\DRIVERS\MijXfilt.sys Image name: MijXfilt.sys Timestamp: Sat May 12 05:27:12 2012 (4FADE6A0) CheckSum: 00022009 ImageSize: 00022000 Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
You may also disable Driver Verifier now.
I think that's fixed it, thanks so much for the help it is really appreciated, sorry it was a bit of a vague explanation of my problem.
Again thanks for the help :)
Very welcome, glad to help, that Xbox 360 Wireless Controller driver always seems to be cause problems :)
You may mark this thread as solved if you like.