Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 Crashes Every Morning

19 Oct 2009   #11
ndfan1993

Windows 7
 
 

Here is what mine currently looks like:




My System SpecsSystem Spec
.
19 Oct 2009   #12
H2SO4

Win7x64
 
 

Quote   Quote: Originally Posted by ndfan1993 View Post
Ok, I am not the one most of the times who forces the restart, it will start the dump get to around 30% and then restart, I have unchecked the auto restart when I get the BSOD but other times when I get there it says it is starting dumping but I could let it sit for 30 minutes and it doesn't even get to 1%....
OK, that's why you never get a minidump. Since the minidump is essentially a summary of a full dump, the fact that there's something wrong during the creation of the full dump becomes a problem.

Some crash types end up mangling the OS components which are responsible for writing the dump. For example, if the disk I/O subsystem goes ga-ga, then it becomes difficult or impossible to dump the memory to disk. Other times the very same hardware problem which caused the BSOD also prevents memory dumping.

If unchecking the "auto restart" option doesn't work for you, try reviewing the contents of the system event log (run EVENTVWR). Sometimes the BSOD bugcheck code and parameters are recorded there just after the following reboot.
My System SpecsSystem Spec
19 Oct 2009   #13
ndfan1993

Windows 7
 
 

Quote   Quote: Originally Posted by H2SO4 View Post
Quote   Quote: Originally Posted by ndfan1993 View Post
Ok, I am not the one most of the times who forces the restart, it will start the dump get to around 30% and then restart, I have unchecked the auto restart when I get the BSOD but other times when I get there it says it is starting dumping but I could let it sit for 30 minutes and it doesn't even get to 1%....
OK, that's why you never get a minidump. Since the minidump is essentially a summary of a full dump, the fact that there's something wrong during the creation of the full dump becomes a problem.

Some crash types end up mangling the OS components which are responsible for writing the dump. For example, if the disk I/O subsystem goes ga-ga, then it becomes difficult or impossible to dump the memory to disk. Other times the very same hardware problem which caused the BSOD also prevents memory dumping.

If unchecking the "auto restart" option doesn't work for you, try reviewing the contents of the system event log (run EVENTVWR). Sometimes the BSOD bugcheck code and parameters are recorded there just after the following reboot.
Will do, shutting down the computer tonight and rebooting tomorrow morning should trigger it.
My System SpecsSystem Spec
.

20 Oct 2009   #14
ndfan1993

Windows 7
 
 

Booted up this morning and 45 minutes in I did not get the BSOD but instead the computer just locked up and became totally unresponsive in which I had to hard reboot.
My System SpecsSystem Spec
21 Oct 2009   #15
ndfan1993

Windows 7
 
 

This morning it restarted itself without any freezing or BSOD, or so I thought. Shortly after the reboot a windows message box popped up with the following information:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA800C024038
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\102109-38641-01.dmp
\AppData\Local\Temp\WER-410407-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Highlights - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
My System SpecsSystem Spec
21 Oct 2009   #16
H2SO4

Win7x64
 
 

Quote   Quote: Originally Posted by ndfan1993 View Post
This morning it restarted itself without any freezing or BSOD, or so I thought. Shortly after the reboot a windows message box popped up with the following information:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA800C024038
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7600
...
A stop 0x124 is a hardware error report being passed along by Windows. It's architecturally different to other "normal" bluescreen types.

If you're confident that the BIOS and hardware drivers are up-to-date, the machine is adequately cooled, and nothing is over-clocked, a stop 0x124 is reason enough to take it back to the shop, especially if it's under warranty.
My System SpecsSystem Spec
21 Oct 2009   #17
ndfan1993

Windows 7
 
 

Quote   Quote: Originally Posted by H2SO4 View Post
Quote   Quote: Originally Posted by ndfan1993 View Post
This morning it restarted itself without any freezing or BSOD, or so I thought. Shortly after the reboot a windows message box popped up with the following information:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA800C024038
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7600
...
A stop 0x124 is a hardware error report being passed along by Windows. It's architecturally different to other "normal" bluescreen types.

If you're confident that the BIOS and hardware drivers are up-to-date, the machine is adequately cooled, and nothing is over-clocked, a stop 0x124 is reason enough to take it back to the shop, especially if it's under warranty.
Bought it custom made from HP back in August....any reason why it would only occur if it was freshly rebooted in the morning 45 min. in and never again? The other thing that troubles me is that this only started occurring the day I installed Windows 7 Ultimate - running Vista Home Premium I never had this problem. Just curious questions....
My System SpecsSystem Spec
21 Oct 2009   #18
H2SO4

Win7x64
 
 

Quote   Quote: Originally Posted by ndfan1993 View Post
Bought it custom made from HP back in August....any reason why it would only occur if it was freshly rebooted in the morning 45 min. in and never again? The other thing that troubles me is that this only started occurring the day I installed Windows 7 Ultimate - running Vista Home Premium I never had this problem. Just curious questions....
All valid questions which are impossible to answer at this level. It is possible that different drivers are exposing hardware flaws which were previously undetected, or that the machine has actually broken down in some way after it was purchased. Personally, I would not live with newly-purchased hardware logging machine check exceptions, but would instead expect the hardware vendor to do further troubleshooting on their own time - after giving me a replacement machine.

If you're interested, I wrote up a bit more info regarding 0x124 crashes on the Vista sister forum:

Please help with BSOD STOP 0x00000124 - Vista Forums
My System SpecsSystem Spec
21 Oct 2009   #19
ndfan1993

Windows 7
 
 

Quote   Quote: Originally Posted by H2SO4 View Post
Quote   Quote: Originally Posted by ndfan1993 View Post
Bought it custom made from HP back in August....any reason why it would only occur if it was freshly rebooted in the morning 45 min. in and never again? The other thing that troubles me is that this only started occurring the day I installed Windows 7 Ultimate - running Vista Home Premium I never had this problem. Just curious questions....
All valid questions which are impossible to answer at this level. It is possible that different drivers are exposing hardware flaws which were previously undetected, or that the machine has actually broken down in some way after it was purchased. Personally, I would not live with newly-purchased hardware logging machine check exceptions, but would instead expect the hardware vendor to do further troubleshooting on their own time - after giving me a replacement machine.

If you're interested, I wrote up a bit more info regarding 0x124 crashes on the Vista sister forum:

Please help with BSOD STOP 0x00000124 - Vista Forums
Thank you for your help, I will contact HP and see what can be done.
My System SpecsSystem Spec
22 Oct 2009   #20
ndfan1993

Windows 7
 
 

Twist #2

I received this BSOD this morning:

My System SpecsSystem Spec
Reply

 Windows 7 Crashes Every Morning




Thread Tools




Similar help and support threads
Thread Forum
Windows 7 Can only access/ping a few websites since this morning
So all day I have been dealing with very, very slow internet speeds. I am not at all sure why this is happening but it's just been awful. Speedtest tells me about 0.1-1.5 mb/s and some websites just cannot load at all. Sometimes I can load a page if I give it a VERY long time, a few minutes, but it...
Network & Sharing
Browser crashes, windows crashes, memory test won't complete, BSOD
Thanks for listening, as my user name reflects I am now into stuff I'm ignorant about. History. Had this computer a little over a year, I7 with 16gb of memory, windows 7 ultimate. etc About a month ago, started seeing BSOD's. The BSOD would normally reflect "Memory Management" as the...
BSOD Help and Support
Windows Configuration Every Morning Terribly Slow!
I just installed Windows 7 and like it for the most part. However, every morning it reconfigures itself, taking up to 10 minutes to boot. This is simply annoying. What's going on?
Windows Updates & Activation
Notes on Windows 7 Service Pack 1 - Installed Early This Morning
Win7SP1 came up as a Windows automatic update last night so I installed it and have done three restarts and one more "check for updates" now to insure it has settled down. For major updates it is a good idea to watch the CPU Usage History graph in the Performance Tab of Task Manager so you know...
Windows Updates & Activation
Windows 7 and activity scheduled for early morning
I just configured a laptop running Windows 7. The Windows updates are set to push to the computer in the early morning hours (I forget which, but call it 3 or 4 in the morning). Similarly, I have the AVG antivirus updates and scans scheduled for early morning hours. The night I got the...
General Discussion
BSOD Every Morning Windows 7
Hi There I have recently built a new desktop, of which the specs are attached. I have tried almost everything I can think of to fix this, but need help with more ideas. Basically my PC crashes every morning when I turn it on within the first 5 -10 minutes. I generally get 2 BSOD's and...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:17.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App