Here's my DMP in txt format -
071113-7940-01.dmp 11/07/2013 20:54:01 INTERRUPT_EXCEPTION_NOT_HANDLED 0x0000003d fffff880`0af994e0 00000000`00000000 00000000`00000000 fffff880`0103178e mv91xx.sys mv91xx.sys+3178e x64 ntoskrnl.exe+75c00 C:\Windows\Minidump\071113-7940-01.dmp 8 15 7601 276,720 11/07/2013 20:55:22
now I can't even boot into safe mode without getting the BSOD! Can anyone help me out here?
BSOD Analysis:
Okay, from my understanding, it seems that a device interrupt was issued, but wasn't able to handled, since the nature of the IRQ didn't have a corresponding ISR within the IDT table for the processor.Code:BugCheck 3D, {fffff8800af994e0, 0, 0, fffff8800103178e} *** WARNING: Unable to verify timestamp for mv91xx.sys *** ERROR: Module load completed but symbols could not be loaded for mv91xx.sys Probably caused by : mv91xx.sys ( mv91xx+3178e )
Code:0: kd> !prcb PRCB for Processor 0 at fffff780ffff0000: Current IRQL -- 11 Threads-- Current fffffa8006c67510 Next 0000000000000000 Idle fffff80003866cc0 Processor Index 0 Number (0, 0) GroupSetMember 1 Interrupt Count -- 00e03fd3 Times -- Dpc 0000203c Interrupt 00000f93 Kernel 0002fde3 User 0000685bmv91xx.sys belongs to your Marvell MV91xx AHCI/RAID driver, and since you have updated the driver, then it may be best to begin testing the hard drive.Code:0: kd> lmvm mv91xx start end module name fffff880`01000000 fffff880`0108c000 mv91xx T (no symbols) Loaded symbol image file: mv91xx.sys Image path: \SystemRoot\system32\DRIVERS\mv91xx.sys Image name: mv91xx.sys Timestamp: Fri Aug 27 10:49:22 2010 (4C778A22) CheckSum: 00050BB0 ImageSize: 0008C000 Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
--------------------------------------------------------------------------Code:0: kd> kv Child-SP RetAddr : Args to Child : Call Site fffff880`0af98c28 fffff800`036dd1a9 : 00000000`0000003d fffff880`0af994e0 00000000`00000000 00000000`00000000 : nt!KeBugCheckEx fffff880`0af98c30 fffff800`036d9509 : 00000000`00000000 00000000`00000000 fffff880`0af994e0 fffff800`03708a90 : nt!KiBugCheckDispatch+0x69 fffff880`0af98d70 fffff800`0370875d : fffff800`038eb978 fffff800`0382ce18 fffff800`03668000 fffff880`0af99c88 : nt!KiInterruptHandler+0x29 fffff880`0af98da0 fffff800`03707535 : fffff800`0382ce10 fffff880`0af98e18 fffff880`0af99c88 fffff800`03668000 : nt!RtlpExecuteHandlerForException+0xd fffff880`0af98dd0 fffff800`037184d1 : fffff880`0af99c88 fffff880`0af994e0 fffff880`00000000 fffffa80`07c0e4e8 : nt!RtlDispatchException+0x415 fffff880`0af994b0 fffff800`036dd282 : fffff880`0af99c88 fffffa80`07bfdb60 fffff880`0af99d30 00000000`00000000 : nt!KiDispatchException+0x135 fffff880`0af99b50 fffff800`036db0b4 : 00000000`00000000 fffff880`01be2bb8 00000000`00000000 fffff880`01be2b70 : nt!KiExceptionDispatch+0xc2 fffff880`0af99d30 fffff880`0103178f : fffffa80`07823008 00000000`00000000 fffffa80`077d5060 fffff880`039fb100 : nt!KiBreakpointTrap+0xf4 (TrapFrame @ fffff880`0af99d30) fffff880`0af99ec0 fffffa80`07823008 : 00000000`00000000 fffffa80`077d5060 fffff880`039fb100 fffffa80`07c0e4e8 : mv91xx+0x3178f fffff880`0af99ec8 00000000`00000000 : fffffa80`077d5060 fffff880`039fb100 fffffa80`07c0e4e8 fffffa80`07c0a2b0 : 0xfffffa80`07823008
Run some hard-drive diagnostics and follow these steps:
Find your hard-drive manufacturer and run their tests.
Additional Tests:
Post a screenshot of Crystal Disk Info summary:
Check for any file system errors and bad sectors using Option #2 of:writhziden said:
Use this command with Disk Check:
Code:chkdsk C: /f /r
I don't think I'm going to be able to update stuff as I can't boot into windows normally and when i boot into safe mode i get to my login password bit and it blue screens straight away... Do you think if I bought another ssd or just bought a hdd to install windows on that may solve it?(I also got overclocking failed appear on some of my boots, I looked and it seems like when I took my PC for repair they manually oc'd in my bios, I'm afraid if I set it to auto it might not work at all haha....
The diagnostic tools can be burned to a DVD or maybe even a bootable USB, and then run without even starting the Windows boot process.
I'll rather identify the problem for definite, then have you spend money unnecessarily.
Trying to do the diagnostic checks on my HDD getting no drive found error but I'll keep trying.
Is the marvell controller problem linked to my WD HDD which is not my C drive or my Crucial M4 SSD which is my C drive?
Also is the ntoskrnl.exe a problem because that came up too in my blue screen view the other day, I think it's missing or corrupted as I wasn't able to open it at the time.
ntoskrnl.exe is part of the Windows kernel, and is not the problem, it's just blamed since Windows wasn't able to find a particular driver or instruction which was actually causing the problem.
The controller will be for both hard disks, are the disks shown within the BIOS?
This may give you some ideas - The BIOS does not detect or recognize the ATA / SATA hard drive
Have you checked the SSD is connected to the motherboard properly with the SATA cables?
It seems that the SSD may be the cause of the problem at the moment, does it have any return policy or warranty? I'm just checking, because if it does, then you ask for a free replacement.
Quote