Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Event Error 41

14 Jul 2013   #1

Win 7 64 bit
Event Error 41

I have been getting these annoying BSOD as well as restarts while gaming, even though i have tested my system using unigine valley and furmark a lot now, usually without any problems. For furmark i use the standard preset 1080p burn in test, unigine valley is tested using the highest settings, all without any problems or artifacts. I checked my temps, which peaks 81c using furmark, and the whole thing almost always "survives" the test without rebooting etc. I think once it had rebooted, so i checked the event manager and it was classed as event 41 or something.

But that was i think the only time it restarted, being such a demanding application i thought thats ok, as furmark did warn of possibility of system reboot prior to a burn in test.

However, after playing games like Railworks 4, after 10 mins or so (i would say consistently) it restarts, or freezes with a buzzingnoise (dont know how to describe it, like some digitally distorted audio), usually i restart it manually, or it restarts itself and without a blue screen. Sometimes the blue screen lasts for a few millisecond and then disappears so i was unable to get a proper dmp file for the BSOD.

I have installed windows various times, one thing i realised i havent done before was to install this USB driver. Before, i had a BSOD which managed to creat a dump file (please see attachment 1) and pointed out that it was a USBPORT.SYS problem. So i realised i havent installed some USB driver everytime i installed windows (doh). However, the restarting problem still trolls me. My last restart yielded this event report.

Please look at my two event report in the following attachments. I didnt know any other way of presenting the error report other than to take screen shots unfortunatly, hope this helps. If this is a wrong format, can you please help me to provide you with a correct one that's helpful to you. I also have old dumpfiles from my old system should you need them.

Please note iam not that much of a tech savvy, i dont understand all the jargon or have any programming experiance etc. Sorry if this did not make any sense, as iam extremely frustrated about this

Thanks in advance

My System SpecsSystem Spec
14 Jul 2013   #2

Win 7 64 bit

Ok i managed to get the dmp file which was hidden on the memorydump folder in C: windows

Iam using Bluescreen viewer and got these results. I was going to post the DMP file but some reason its really large at 321mb so i sent print screens of the descriptions. Hope this helps
My System SpecsSystem Spec

 Event Error 41

Thread Tools

Similar help and support threads
Thread Forum
Bitlocker error when inserting any USB device, error event ID 24620
Encrypted volume check: Volume information on cannot be read Source of error is Bitlocker-driver The above is the error, notice it doesn't list a volume. I checked and bitlocker is not turned on, chkdsk shows no errors and everything is actually running fine, just happen to notice this...
System Security
Event Viewer error iaStor Event 9
I have a pavilion desktop h8-1075, and have found the following comes up in error of event viewer every so often iaStor did not respond within the timeout period event 9 any assistance would be great to see if someone can cure this issue Pavilion Desktop hpe h8-1075uk Win 7/Pro 16...
Event 1001 BugCheck Event 41 Kernel-Power Event 4 k57nd60a
Alright, started getting the 1001 BugCheck crash with Event 41 Kernel-Power BSOD a few times not long ago, widely spaced out incidents (it will lock up, make a very weird repetitive noise through my stereo speakers and will also get black and white bars across the screen before the blue screen...
BSOD Help and Support
Event Viewer Error Message Event ID11 - How do I get rid of this to?
Every time I boot my laptop I get error message Event ID 11 in Event Viewer. The details are: Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications. This is listed...
BSOD Help and Support
Event Viewer Error Message Event ID10 - How to get rid of it?
Every time I boot my laptop I get error message Event ID 10 in Event Viewer. The details are: Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor"AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:32.
Twitter Facebook Google+