BSOD when gaming/screen sleeps


  1. Posts : 4
    Windows 7 64bit
       #1

    BSOD when gaming/screen sleeps


    Hello all,

    First of all, I must say, I have always been an avid "searcher" of these forums for answers but I have come to the point where I need some assistance. I built a new PC and keep getting a BSOD when trying to game or when the PC goes to sleep. I have a feeling it has to do with the wireless Xbox controller that I am using but I downloaded all of the drivers straight off of Microsoft's site. All of the tweaks I have done to the PC have been stress tested so I really don't think it is hardware related. Attached is the SF outfile. Thank you in advance for your assistance and for your assistance in other topics I may have searched over the years.

    -Zirra
      My Computer


  2. Posts : 15,026
    Windows 10 Home 64Bit
       #2

    Problem Drivers:
    Code:
    AODDriver2.sys              Thu Apr  5 15:23:37 2012 (4F7D6499)
    AMD Overdrive; also in EasyTune6 for Gigabyte motherboard  [br]  Known BSOD issues in Win7
    (AODDriver2.sys) is either a stand-alone application, or a component of the AMD VISION Engine Control Center. This driver is known to cause BSOD's on some Win7 systems. Please uninstall all AMD/ATI video stuff from Control Panel...Programs...Uninstall a program. Then, download (but DO NOT install) a fresh copy of the ATI drivers from Global Provider of Innovative Graphics, Processors and Media Solutions | AMD (in the upper right corner of the page) Use this procedure to install the DRIVER ONLY: ATI video cards - DRIVER ONLY installation procedure

    Code:
    xusb21.sys                  Fri Aug 14 04:10:17 2009 (4A848F49)
    XBox USB wireless controller [br] BSOD issues in Win7 with 2009 driver (found in mid-2012)
    Update to the latest version available - Driver Reference Table - xusb21.sys

    MSINFO32:
    Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter
    Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.
    Also, save a copy as a .txt file and include it also (it's much more difficult to read, but we have greater success in getting the info from it).

    Use the System File Checker tool and Run Disk Check:

    Test and Diagnose RAM Issues with Memtest86+:
    Pay close attention to part 3 of the tutorial "If you have errors"
      My Computer


  3. Posts : 4
    Windows 7 64bit
    Thread Starter
       #3

    Koolkat,

    Thank you for the quick reply. I have followed most of your suggestions to a "T" and haven't seen the BSOD again since. The only issue I found was after leaving Memtest86 run while I was at work I found many memory errors. I discovered that one of my memory timings was incorrect. I'm now running the Memtest session again and so far I am 3.5 hours in with 2 passes and 0 errors. I did try playing Battlefield 3 again and while it didn't BSOD this time, I do consistently get kicked out between 30 seconds and 3 minutes of game play. I will retrieve the MSInfo report for you tomorrow morning after this Memtest has run all evening.

    Again, thank you so much for all of your help. My PC and I appreciate it.

    -Zirra
      My Computer


  4. Posts : 15,026
    Windows 10 Home 64Bit
       #4

    No problem. Thanks for the update :)
      My Computer


  5. Posts : 4
    Windows 7 64bit
    Thread Starter
       #5

    Koolkat,

    I ended up running Memtest for 12.5 hours with no errors. While my BSOD issues seem to be behind me, I am still having issues with games crashing on me (approx 30 sec-3 min into the game). I did some searching and think it has something to do with my video card drivers. I ran a HWMonitor session during a game and the GPU got up to about 70 degrees C so it wasn't really that hot.

    Regardless, I have attached the MSconfig files for review. Thanks again for your help with these frustrating issues.

    -Zirra
      My Computer


  6. Posts : 15,026
    Windows 10 Home 64Bit
       #6

    Reduce items at start up:
    Your Antivirus software is basically whats just needed there.

    Are you overclocking any hardware?
      My Computer


  7. Posts : 26,863
    Windows 11 Pro
       #7

    I don't know how you installed your drivers, but this is how I do it. Go to AMD and select the current WHQL driver, and download to your desktop. Download and install Driver Sweeper. Run the driver you just downloaded, when you get set up, there will be a choice to install or uninstall, select uninstall. When completed it will ask you to reboot, do so. Then reboot again into safe mode. Once in safe mode, run driver sweeper, select only AMD display drivers, and click analyze, once it is finished, click clean. It will tell you to reboot, do so and reboot into normal mode. Run the new AMD driver again. This time choose install. When it completes it will say reboot. Reboot and you should have as clean a driver install as you can get. The problem lies sometimes in remnants of 2 or more drivers left over from previous installs. Also, when you install Driver Sweeper, be careful of all the unwanted programs they want to install with it. Just uncheck them/decline them all. See if that improves your game play. As Koolkat said, if you are overclocking, set everything back to defaults.
      My Computer


  8. Posts : 4
    Windows 7 64bit
    Thread Starter
       #8

    Thanks for the replies. As far as overclocking, I only have the NB overclocked from 2200-2600 and the cores from 4000 to 4600 (on 1.38 volts). I have stress tested this configuration on Prime95 for half an hour and it didn't produce errors but I have yet to do a long stress test.

    I tried cleaning out the old graphics drivers and installing the latest ones without the Catalyst software (using Koolkat's instructions above). Literally 3 seconds into a Multiplayer session on Battlefield 3, the application was freezing (requiring an end-task). I will save my overclock profile and revert to default to see if this works. If it doesn't, I am out of ideas.

    Thanks again for your awesome support guys.


    -Zirra

    Edit: I loaded my stock profile for the overclock and it worked perfectly. There is obviously something wrong with my settings and they aren't as stable as I first thought. Thanks for all of your help guys and please close this thread.
    Last edited by OhNoZirra; 18 Jul 2013 at 00:48.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 02:32.
Find Us