Follow Startup Repair Infinite Loop Recovery
But, you should go for a clean reinstall. Back your data up externally following Copy & Paste - in Windows Recovery Console and then go for a Clean Reinstall - Factory OEM Windows 7 ...... you need to get rid of those lenovo bloatware.
Alright ill do the infinite loop thingy but any tips now cuz my screen won't even turn on when I power on my laptop =/
You need to do a power cycle.
Shut down the computer. Remove the charger. Remove the battery too, so that there may not be any source of power available. Now press and hold the power button for say 30 seconds. Hopefully it will drain all the remaining power out.
Now put the battery back. Plug in the charger and power on the computer.
Didn't work the screen still won't power on.. shud I unplug the CMOS battery too and hold down the power button?
Try it. If still not working, better you bring it to a technician. Laptop's hardware is too complicated as I find.
I managed to get the screen to work but whenever i try to enter the repair screen to fix the reboot i get these annoying red lines across my screen and they will either freeze the computer or reboot it... any ideas?
How did you manage the screen to work? Let us know?
Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.
Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark
I literally just replaced the RAM 2 or 3 days ago cuz of bad RAM unless I shud do it again? And is that graphics card test like a memtest? Don't need to fully boot up the comp? And I just let my laptop sit running for like 2 mins then the screen would come on
What you are having is a hardware error. If you want to point the error out, you need to perform those tests.
No, Furmark test runs from the desktop. If you cannot run furmark, you can run memtest. If memtest comes free from errors, and you cannot run furmark at all, blame the GPU for the mess.
Ok lets say memtest comes back with 0 errors and I still can't startup windows andnit does happen to be my GPU... how much do you think it would cost to get the same identical one in my laptop? Cuz I kno u can't upgrade graphics cards in laptops
Quote