Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Win7 x64 Ultimate, BSODs constant in last few weeks

22 Jul 2013   #1
Grunter

Windows 7 Ultimate x64
 
 
Win7 x64 Ultimate, BSODs constant in last few weeks

Howdy!
I have had a few BSOD's lately, had not had one for a week and believed the problem solved with doing a clean install of the nvidia current video driver. However today upon booting the computer for the first time today I got a 0x050 PAGE_FAULT_IN_NONPAGED_AREA, I rebooted and everything was fine, shut down the machine and then after 4 hrs came back, turned on and got a BSOD on windows booting into the user 0x01e KMODE_EXCEPTION_NOT_HANDLED

I am actually getting agrivated and not sure where to go from here. I have attached the zip, hopefully someone can help me out. Thank you


My System SpecsSystem Spec
.
22 Jul 2013   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Hello Grunter.

Avast is causing the BSODs here.
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1A, {41790, fffffa8015a20d20, ffff, 0}

*** WARNING: Unable to verify timestamp for aswSnx.SYS
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.SYS
Probably caused by : aswSnx.SYS ( aswSnx+2eebf )

Followup: MachineOwner
---------
Description here: Driver Reference Table - aswSnx.SYS

And again .....
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000005, fffff8800bdb3d53, fffff880096a5c70, 0}

Probably caused by : aswMonFlt.sys ( aswMonFlt+5d53 )

Followup: MachineOwner
---------
Description here: http://www.carrona.org/drivers/drive...=aswMonFlt.sys

Uninstall Avast using Avast Uninstall Utility. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Let us know the results.
My System SpecsSystem Spec
22 Jul 2013   #3
Grunter

Windows 7 Ultimate x64
 
 

Removed avast and when booting after the safe mode boot for removal logged in and as everything was loading got BSOD APC_INDEX_MISMATCH 0x00000001
Ive included the files after the BSOD, I had added avast because in the past MSE let something in and I had to remove the virus, is AVG any better?
Thanks!
My System SpecsSystem Spec
.

22 Jul 2013   #4
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Your crash dumps are not showing any finite probable cause. In such a situation, it is better to enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

information   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.

warning   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.

Tip   Tip

Let us know the results, with the subsequent crash dumps, if any.
My System SpecsSystem Spec
23 Jul 2013   #5
Grunter

Windows 7 Ultimate x64
 
 

Howdy!
Thanks for your time, before I got to do this next part I got a BSOD again 0x01a MEMORY_MANEGMENT
I have the file for this one see if it shows anything
Thanks sooooo much for your help, I really appreciate it.
My System SpecsSystem Spec
23 Jul 2013   #6
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Better you take the suggestion as given earlier. Update the DV enabled crash dumps next time.
My System SpecsSystem Spec
23 Jul 2013   #7
Grunter

Windows 7 Ultimate x64
 
 

Will do so, upon boot at the moment its crashing the application constantly
My System SpecsSystem Spec
23 Jul 2013   #8
Grunter

Windows 7 Ultimate x64
 
 

Ok, I am there and followed the instructions but it only lists 2 drivers and both are Microsoft, it is not giving me a long list. Is there anything I am doing wrong?

Ok at this time was able to get more than 2 drivers in the list but they all show as a microsoft corp.
Also had another BSOD for ntfs.sys when trying to run this.

I am including the dump after this BSOD and the pervious one. Tried running the driver verifier again, only get windows drivers.

One question, would VMWare be causing these problems? Sorry I have not been able to driver verify, the list is just not pulling up as you requested
My System SpecsSystem Spec
23 Jul 2013   #9
Grunter

Windows 7 Ultimate x64
 
 

Finally was able to run the verifier and get a huge list, rebooting the machine resulted in constant BSOD which would prompt into windows repair startup. Eventually got into safe mode to disable verifier and the one item that was the cause, or rather what was reported, was pdiports.sys
Im enclosing the new files after the 2 BSOD's with the Verifier running
My System SpecsSystem Spec
24 Jul 2013   #10
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

The BSOD is caused by pdiports.sys; Portrait Displays low level device driver (c:\windows\system32\drivers\pdiports.sys)
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C9, {21f, fffff88007df6970, fffff9800512ce10, 0}

Unable to load image \SystemRoot\system32\DRIVERS\PdiPorts.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for PdiPorts.sys
*** ERROR: Module load completed but symbols could not be loaded for PdiPorts.sys
Probably caused by : PdiPorts.sys ( PdiPorts+1970 )

Followup: MachineOwner
---------
And the driver is historically old.
Code:
fffff880`07df5000 fffff880`07dfd000   PdiPorts T (no symbols)           
    Loaded symbol image file: PdiPorts.sys
    Image path: \SystemRoot\system32\DRIVERS\PdiPorts.sys
    Image name: PdiPorts.sys
    Timestamp:        Fri Nov 17 06:01:16 2006 (455D02D4)
    CheckSum:         0000E8C4
    ImageSize:        00008000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Try to update it from Portrait Displays | Support | Technical Support For Branded Products . If any latest update is not available, uninstall that thing.

Let us know the results.
My System SpecsSystem Spec
Reply

 Win7 x64 Ultimate, BSODs constant in last few weeks




Thread Tools




Similar help and support threads
Thread Forum
Various BSODs over a period of 2 weeks or so now
Windows 7 64 8GB Ram Radeon HD8990 ITB Seagate HDD I have updated graphics card drivers which I believed to be the original issue but they have continued after doing so two days later. I have uninstalled Avast which I then thought was the issue but got two more BSODs today. I have also ran...
BSOD Help and Support
Multiple 64-bit Win7 Pro BSODs for weeks
For a couple of weeks now I've been getting several different BSODs on one of my 64-bit Win 7 Pro SP1 systems. I don't think I've seen more than one at a time (i.e., the sequence I keep seeing is BSOD, reboot with CHKDSK, then the system runs fine with no issues for hours or days before another...
BSOD Help and Support
3 BSODs in the last six weeks, most recent was 0x00000101
I have had three BSODs in the past six weeks. First was on October 12, and definitely happened in the process of the normal restart of Windows I do each evening before bed, as I was watching and saw it happen. I don't know the details of the error, as it was somehow not logged. Second...
BSOD Help and Support
BSODs started happening 1-2 weeks ago :(
I have windows 7 ultimate x64, a custom built pc, it has been fine for about 3 years, but ever since about one or two weeks ago i just kept getting bsods every so often. Here are the files attached, if if you want any other information i will tell you anything you need! i wish i could pay some of...
BSOD Help and Support
Multiple freezes BSODs per day for the last 3 weeks
Hello. I hope that someone can assist me to resolve this issue. For the last 3 weeks or so my system has frozen and or BSOD's for no easily apparent reason. Here's some background along with the required items from the excellent posting instructions. Problem does not occur in safe mode I...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:13.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App