BSOD, Checksum bad after new battery, Nothing saved in between reboots

Page 1 of 3 123 LastLast

  1. Posts : 18
    Windows 7 Professional x64
       #1

    BSOD, Checksum bad after new battery, Nothing saved in between reboots


    Hey all. First here are my spec

    Windows 7 64 bit
    1090T AMD 6 core CPU
    MSI 870-G45 Mobo
    8 Gigs of Ram
    XFX 6850 Video Card
    2 Hard drives - Hitatchi 500 gig and Samsund SSD 250 gig
    Went through device manager and all drivers up to date.
    ***Replaced CMOS battery within the last 2 hours

    My issues - Yesterday when booting my computer I encountered a BSOD. I took a picture of the numbers and rebooted. Got the CMOS checksum bad error. Ran repair, restored, and pc booted up. I downloaded blue screen checker and borderlands 2 later that day.

    Today when booting I went through the same process or close, (it doesn't always BSOD) and it booted up. The 2 things I downloaded were still on my hard drive but they were "missing" both needed to be re-installed.

    I've restarted a few times in between and have had the same issue.

    (this may not be important, may help)
    So far I have put in a new cmos battery and checked and redone the settings. Beyond that I'm very confused why nothing is happening. I reformatted in march and have only been running this windows 7 from then. I had random BSOD mostly when gaming then and it stopped some after removing 2 sticks of ram. To make sure nothing else was messed up I reinstalled windows 7 and put in the new SSD. I'm not gonna say this issue is unrelated to the SSD but so far it hasn't given me any issues at all.

    Going to post the various BSOD codes I've encountered in just a moment.

    in order of most recent

    stop: 0x000000F7 (0xFFFFF880009A8C48, 0x00003AF4C63967A0, 0xFFFFC50B39C6985F, 0x0000000000000000)

    stop: 0x000000F7 (OxFFFFF880009A8C48, 0xFFFFC50B39C6985F, 0x0000000000000000)
    Last edited by yooper1989; 16 Jul 2013 at 13:28. Reason: Adding BSOD Dump Files
      My Computer


  2. Posts : 18
    Windows 7 Professional x64
    Thread Starter
       #2

    Update: As of now the BSOD has stopped. The computer will now start to boot, tell me the cmos checksum is bad, I then enter the settings and make sure date and time are good (they always are), I save and continue booting and it is fine.

    The catch is nothing I do while on the computer saves. I'm downloading an audio manager, I need to restart to finish the install, every time I restart I need to start over the install, then restart. Its one heck of a vicious cycle lol. I have no idea what to do... Battery is new and I moved a switch on the mobo to reset everything.
      My Computer


  3. Posts : 18
    Windows 7 Professional x64
    Thread Starter
       #3

    Zip file now attached. With the computer being weird and certain things not saving in between restarts when I set it to save mini dumps it didn't the first couple times. All good there now, and I was wrong, the blue screens are not gone as I'm sure you will see in the info.
      My Computer


  4. Posts : 18
    Windows 7 Professional x64
    Thread Starter
       #4

    Any thoughts?
      My Computer


  5. Posts : 18
    Windows 7 Professional x64
    Thread Starter
       #5

    New update that confused me. Really no clue whats going on now and could use the help.

    Yesterday I pulled my two 4 gig ram sticks. I put in two 2 gig ram sticks, these were out from previous blue screening in March and I assumed one or both were bad. When I put these two in the PC booted right up 100% normal. Also no checksum bad screen.

    After using it for a while I booted down and this morning I started the PC again, same configuration. Still no checksum bad screen but it blue screened again. I was curious, so I put the original two 4 gig ram sticks in and removed the other two 2 gig ram sticks. It booted like normal.

    How is it that it boots normal after swapping the ram back and forth? That has to be the craziest thing I've ever heard a computer do!
      My Computer


  6. Arc
    Posts : 35,373
    Microsoft Windows 10 Pro Insider Preview 64-bit
       #6

    The stop 0xF7 BSODs are not present there in your zip. Probably those are failed to be recorded.

    The regular causes of a stop 0xF7 BSOD are malfunctioning Device Driver or malware infection.

    From the available dumps, it can be figured out that some USB device driver is malfunctioning, and some HDD malfunctioning, too. All those can be caused by a malware too.

    So I will suggest you to do the following :

    Scan the system for possible virus infection with the following programs, not with the Avast you have installed.


    Seatool for dos: SeaTools | Seagate download

    • Burn it in a blank cd. boot from the CD, click on "Accept", wait for it to finish detecting the drives, then in the upper left corner select "Basic Tests", then select "Long Test" and let it run.
    • You can use Win32 DiscImager to create a bootable USB and run Seatools for DOS. Follow this post to know how to make a bootable Seatools USB.

    If both of those tests came clean, enable Driver Verifier to monitor the drivers.
    Driver Verifier - Enable and Disable
    Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

       Information
    Why Driver Verifier:
    It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

    How Can we know that DV is enabled:
    It will make the system bit of slow, laggy.

       Warning
    Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

    If there is no points, make a System Restore Point manually before enabling DV.

       Tip




    Let us know the results, with the subsequent crash dumps, if any. Post it following the Blue Screen of Death (BSOD) Posting Instructions.
    ________________________________________________________________________
    BSOD ANALYSIS:
    Code:
    BugCheck 1000007E, {ffffffffc0000005, fffff80002cd22be, fffff88003763748, fffff88003762fb0}
    
    Probably caused by : rdyboost.sys ( rdyboost!SmFpAllocate+4f )
    
    Followup: MachineOwner
    --------------------------------------------------------------------------------------
    BugCheck A, {fffffa7f98936cb0, 2, 0, fffff80002ccdbfe}
    
    Probably caused by : USBPORT.SYS ( USBPORT!USBPORT_ReleaseEpListLock+21 )
    
    Followup: MachineOwner
    ---------------------------------------------------------------------------------------
    BugCheck D1, {fffff87fbd890cd0, 2, 8, fffff87fbd890cd0}
    
    Probably caused by : USBPORT.SYS ( USBPORT!USBPORT_Core_UsbMapDpc_Worker+53 )
    
    Followup: MachineOwner
    ---------
      My Computer


  7. Posts : 18
    Windows 7 Professional x64
    Thread Starter
       #7

    Sorry for my delay in answering, work got in the way. I appreciate the thorough answer and I will get on this very soon.
      My Computer


  8. Posts : 18
    Windows 7 Professional x64
    Thread Starter
       #8

    Quick question... You mentioned a USB driver failing. I have a literally psycho refurbed Razer Lycosa keyboard that does insane things regularly that I planned on replacing soon. It mostly sticks to repeating a key that is not locked down until I unplug it from the usb and sometimes randomly not working after resetting the repeating key.

    The question is could this thing be causing it possibly?
      My Computer


  9. Arc
    Posts : 35,373
    Microsoft Windows 10 Pro Insider Preview 64-bit
       #9

    It may be a problale cause, as the behavior is noticed many a times.

    Before abandoning it, try to update the driver a a try.
    Razer Support
      My Computer


  10. Posts : 18
    Windows 7 Professional x64
    Thread Starter
       #10

    Windows Defender Offline told me this: (all the other programs came back with nothing to report.)

    Your PC needs to be repaired. Operating system couldn't be loaded because a critical system driver is missing or contains errors.

    File: \windows\systems32\drivers\amdsbs.sys

    (just wondering too I have 64 bit windows, I know a lot of things are set to 32 and also work on 64, just want to make sure that is one.

    error code: 0x000009B

    Problem is the PC is really mad lately and I can't even sign on to it. Also, it won't boot to my windows disc, it gets to the windows loading part and freezes. Though I may need a specific repair disc... The one I tried was my windows 7 professional install disc.
      My Computer


 
Page 1 of 3 123 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 17:23.
Find Us