BSOD - Stuck in Endless Startup Repair Loop

VistaKing · 30 Jul 2013

I think you could run it without the disc but its a good thing to have it in there as well .

Cheesenium · 30 Jul 2013

Just an update:

After I ran SFC, I had found that Windows Resource Protection did not find any integrity violations.

Also, my PC has passed all the tests on Memtest 86+. I had ran 9 tests.

Unfortunately, I still cant login to windows without getting BSOD at the loading screen. Still getting the same error: BAD_POOL_ERROR *** STOP: 0x00000019 (0x00000000000000003, 0xFFFFF8A0004E06D0, 0x0000000000000000, oxFFFFF8A0004E06D0)

Is there anything else I can try?

VistaKing · 30 Jul 2013

Can you login to Windows ? So your dmp file could be analyzed ?

Cheesenium · 30 Jul 2013

VistaKing said:

Can you login to Windows ? So your dmp file could be analyzed ?

Unfortunately, no, i am still stuck outside windows. Still BSOD when Windows is loading.

Is there anything else I can try?

Or I have to restore my laptop to factory condition?

VistaKing · 30 Jul 2013

Lets see something can you Redownload the FRST program place it inside a USB flash drive and do the steps again ?

Cheesenium · 30 Jul 2013

VistaKing said:

Lets see something can you Redownload the FRST program place it inside a USB flash drive and do the steps again ?

Alright, i'll try to get a FRST.txt. Maybe this time round, take out Avira from booting with the PC. I wont connect my PC to the internet so risk of getting malware or viruses are low.

VistaKing · 30 Jul 2013

Do the same steps in Post #2

Just download a new copy of the FRST.exe and save it to a USB flash drive

Cheesenium · 30 Jul 2013

Here is my FRST.txt file: Scan result of Farbar Recovery Scan Tool (FRST.txt) (x64) Version: 30-07-2013 03 - Pastebin.com

Thanks for you help, by the way.

VistaKing · 30 Jul 2013

Open Notepad . Inside Notepad paste the highlighted text inside notepad

start
HKLM\...\InprocServer32: [Default-cscui] <==== ATTENTION!
C:\Windows\Tasks\SA.DAT
end

Click on File ====> Save As

File Name : Fixlist.txt

Save as type : All Files

Location : USB Flash Drive

Click on the [Save] button .

Open the FRST tool again inside System Recovery and click on the [Fix] button . Once complete it will create a new log called Fixlog.txt . Upload the new log created in your reply . It should be inside the usb drive .

Cheesenium · 30 Jul 2013

Here is the Fix Log.

Code:

Fix result of Farbar Recovery Tool (FRST written by Farbar) (x64) Version: 30-07-2013 03
Ran by SYSTEM at 2013-07-31 11:38:07 Run:2
Running from H:\
Boot Mode: Recovery
==============================================

HKLM\Software\Classes\CLSID\{750fdf10-2a26-11d1-a3ea-080036587f03}\InprocServer32\\Default => Value was restored successfully.
C:\Windows\Tasks\SA.DAT => Moved successfully.

==== End of Fixlog ====

I try to boot into Safe Mode and the PC still lockup after loading \Windows\system32\drivers\BMLoad.sys with no hard disk activity.