Multiple BSOD while Welcome Screen.


  1. Posts : 3
    Windows 7 Pro x64
       #1

    Multiple BSOD while Welcome Screen.


    My System throws random BSODs at me while Starting up and only then...
    The Problem occures while Booting and waking from Hibernate or Standby
    If i get past the Welcome Screen everything seems to run just fine.
    I already tried CHKDSK /f /r and the Windows build-in RAM-diag tool and Memtest (only of the running system so far)... No error Detected (but not too sure about the RAM-part).


    Any help would be greatly appreciated,
    Ben
      My Computer


  2. Posts : 15,026
    Windows 10 Home 64Bit
       #2

    Test and Diagnose RAM Issues with Memtest86+:

       Tip
    • Pay close attention to part 3 of the tutorial "If you have errors"
    • Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.

    Upload a screenshot using:
    For how to upload a screenshot or file, read here

    Test your Hard Drive by running:
      My Computer


  3. Posts : 3
    Windows 7 Pro x64
    Thread Starter
       #3

    Thanks, since the System is cooled down and the the BSOD occurs alsways right after booting when the system is cold i'll start with a cold Memtest86. Results in a few hours!

    Thanks for the quick reply!
      My Computer


  4. Posts : 3
    Windows 7 Pro x64
    Thread Starter
       #4

    koolkat77 said:
    Test and Diagnose RAM Issues with Memtest86+:
       Tip

    • Pay close attention to part 3 of the tutorial "If you have errors"
    • Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.

    This seems to have found the Problem the RAM produces a massive massive error count when cold, but none when its warm.
    Since there is only one RAM slot in this ultrabook i need too wait for a working bar off DDR3 SO-DIMM to verify if its the memory or the mainboard slot. Next update then!


    thanks, Ben
      My Computer


  5. Posts : 15,026
    Windows 10 Home 64Bit
       #5

    Thanks for the update.
    Good luck!
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 19:22.
Find Us