New
#31
here is the file requested
Yes the driver has been updated.
Code:c:\windows\system32\drivers\netr28x.sys (3.0.0.41, 606.00 KB (620,544 bytes), 10/06/2009 2:35 PM)Post back with further developments :) .Code:c:\windows\system32\drivers\netr28x.sys (3.1.0.0, 899.28 KB (920,864 bytes), 17/08/2013 3:42 PM)
and the BSOD continues, here is the most recent logs. I am heading to work will be back on working in a couple hours. Thanks for the help this computer will be the death of me. I'll check forums at work. so if you need any information just shout.
I had pc running FurMark and Prime 95 to test the hardware, but they both did not cause a crash. After turning these off. I Blue screened again. The Debug points to hardware, but I don't know how to diagnose which piece it is.
I bought new RAM and installed it because of previous memtest reading, and chkdsk came back clean on the HDD. does that either mean it is my CPU or GPU or motherboard?
after multiple days of diagnostics. I am about ready to give up and save up for a new PC.
*************************************************************************
Probably caused by : hardware ( nt!KiKernelCalloutExceptionHandler+e )
Followup: MachineOwner
---------
KMODE_EXCEPTION_NOT_HANDLED (1e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Arguments:
Arg1: 0000000000000000, The exception code that was not handled
Arg2: 0000000000000000, The address that the exception occurred at
Arg3: 0000000000000000, Parameter 0 of the exception
Arg4: 0000000000000000, Parameter 1 of the exception
Debugging Details:
------------------
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0x1E
PROCESS_NAME: System
CURRENT_IRQL: 0
TAG_NOT_DEFINED_c000000f: FFFFF88002F22FB0
EXCEPTION_RECORD: fffff88002f1ba38 -- (.exr 0xfffff88002f1ba38)
ExceptionAddress: fffff80002e2b802 (hal!KeQueryPerformanceCounter+0x000000000000010e)
ExceptionCode: c000001d (Illegal instruction)
ExceptionFlags: 00000000
NumberParameters: 0
TRAP_FRAME: fffff88002f1bae0 -- (.trap 0xfffff88002f1bae0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=00000004ac0557d5 rbx=0000000000000000 rcx=0000000000000001
rdx=000012b000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002e2b802 rsp=fffff88002f1bc70 rbp=0000000000000000
r8=0000000000000000 r9=00000000002faf5f r10=000000000002572c
r11=fffffa8006c65738 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl zr na po nc
hal!KeQueryPerformanceCounter+0x10e:
fffff800`02e2b802 c4 ???
Resetting default scope
MISALIGNED_IP:
hal!KeQueryPerformanceCounter+10e
fffff800`02e2b802 c4 ???
LAST_CONTROL_TRANSFER: from fffff80002ed257e to fffff80002edab50
STACK_TEXT:
fffff880`02f1ab18 fffff800`02ed257e : fffff880`02f1ae50 00000000`cf7fe53c fffff880`02f1b290 fffff800`02f05a90 : nt!KeBugCheck
fffff880`02f1ab20 fffff800`02f0575d : fffff800`030e90e0 fffff800`03027a80 fffff800`02e65000 fffff880`02f1ba38 : nt!KiKernelCalloutExceptionHandler+0xe
fffff880`02f1ab50 fffff800`02f04535 : fffff800`0302a038 fffff880`02f1abc8 fffff880`02f1ba38 fffff800`02e65000 : nt!RtlpExecuteHandlerForException+0xd
fffff880`02f1ab80 fffff800`02f154e1 : fffff880`02f1ba38 fffff880`02f1b290 fffff880`00000000 00000000`00000000 : nt!RtlDispatchException+0x415
fffff880`02f1b260 fffff800`02eda202 : fffff880`02f1ba38 00000000`00000000 fffff880`02f1bae0 fffff880`009eb180 : nt!KiDispatchException+0x135
fffff880`02f1b900 fffff800`02ed835f : fffff880`02f1bae0 00000000`00000500 fffffa80`08a82000 fffff880`00000000 : nt!KiExceptionDispatch+0xc2
fffff880`02f1bae0 fffff800`02e2b802 : 00000000`00000010 00000000`00000246 fffff880`02f1bc98 00000000`00000018 : nt!KiInvalidOpcodeFault+0x11f
fffff880`02f1bc70 fffff800`02ee3786 : 00000000`002faf5f 00000000`00000000 fffffa80`0855a470 00000000`00000000 : hal!KeQueryPerformanceCounter+0x10e
fffff880`02f1bca0 fffff800`02ed285c : fffff880`009eb180 fffff880`00000000 00000000`00000000 fffff880`014c9800 : nt!PoIdle+0x5a7
fffff880`02f1bd80 00000000`00000000 : fffff880`02f1c000 fffff880`02f16000 fffff880`02f1bd40 00000000`00000000 : nt!KiIdleLoop+0x2c
STACK_COMMAND: kb
FOLLOWUP_IP:
nt!KiKernelCalloutExceptionHandler+e
fffff800`02ed257e 90 nop
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: nt!KiKernelCalloutExceptionHandler+e
FOLLOWUP_NAME: MachineOwner
IMAGE_NAME: hardware
DEBUG_FLR_IMAGE_TIMESTAMP: 0
MODULE_NAME: hardware
FAILURE_BUCKET_ID: X64_IP_MISALIGNED
BUCKET_ID: X64_IP_MISALIGNED
Followup: MachineOwner
---------
slinn1992, I'm sorry you feel this way but if you wish to give up on the PC
the decision is only yours to make, I believe there are other avenues that we have yet
to try.
I just have to ask,
What is the new RAM configuration?
Will you be willing to perform a clean Windows install?
Will you be able to run without your GPU? (for troubleshooting purposes)
Will you be able to switch to a wired inernet connection? (for troubleshooting purposes)
I could perform another clean install, my ram is in slots a1 and b1, i did another ram test and he new memory came back with errors so it could be my ram slots. I. Going to try slots a2 and b2. I may be able to run a cable from the router to the computer. Ill check to see if i have one long enough.
Also, I have no way to run without the gpu as there is no on board gpu.
Im sorry which tutorial? I bought a new 2 stick kit.