Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSDO After system started

17 Aug 2013   #1

Win7 64bits
BSDO After system started

I have had some issues, before, the dump file wasn't created, now it was and I was able to share this.

Thanks for your help

My System SpecsSystem Spec
17 Aug 2013   #2

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit

Hello myuption.

Your BSOD is caused by Hardware error ... some PCIe device is responsible for it.
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arg1: 0000000000000004, PCI Express Error
Arg2: fffffa8004aa68d8, Address of the WHEA_ERROR_RECORD structure.
Arg3: 0000000000000000
Arg4: 0000000000000000
A detailed analysis points out to it .....
Section 0     : PCI Express
Descriptor    @ fffffa8004aa6958
Section       @ fffffa8004aa69e8
Offset        : 272
Length        : 208
Flags         : 0x00000001 Primary
Severity      : Recoverable

Port Type     : Root Port
Version       : 1.1
Command/Status: 0x4010/0x0507
Device Id     :
  VenId:DevId : 8086:340e
  Class code  : 030400
  Function No : 0x00
  Device No   : 0x07
  Segment     : 0x0000
  Primary Bus : 0x00
  Second. Bus : 0x00
  Slot        : 0x0000
Dev. Serial # : 0000000000000000
Express Capability Information @ fffffa8004aa6a1c
  Device Caps : 00008021 Role-Based Error Reporting: 1
  Device Ctl  : 0107 ur FE NF CE
  Dev Status  : 0003 ur fe NF CE
   Root Ctl   : 0008 fs nfs cs

AER Information @ fffffa8004aa6a58
  Uncorrectable Error Status    : 00004020 ur ecrc mtlp rof uc ca CTO fcp ptlp SD dlp und
  Uncorrectable Error Mask      : 00000000 ur ecrc mtlp rof uc ca cto fcp ptlp sd dlp und
  Uncorrectable Error Severity  : 00062010 ur ecrc MTLP ROF uc ca cto FCP ptlp sd DLP und
  Correctable Error Status      : 00000000 adv rtto rnro dllp tlp re
  Correctable Error Mask        : 00000000 adv rtto rnro dllp tlp re
  Caps & Control                : 00000005 ecrcchken ecrcchkcap ecrcgenen ecrcgencap FEP
  Header Log                    : 00000000 00000000 00000000 00000000
  Root Error Command            : 00000000 fen nfen cen
  Root Error Status             : 00000000 MSG# 00 fer nfer fuf mur ur mcr cer
  Correctable Error Source ID   : 00,00,00
  Correctable Error Source ID   : 00,00,00
UC means unexpected completion and cto means completion timed out, which overall indicates that some PCIe device is unexpectedly stopping to work.

Your PCIe devices are ....
  • ATI Radeon HD 5670, GPU
  • Realtek PCIe GBE Family Controller, Onboard ethernet
  • DW1525 (802.11n) WLAN PCIe Card, Wireless networking.
Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

And, remove the Wireless network card and see if the same BSODs occur or not.

Let us know the results.
My System SpecsSystem Spec
17 Aug 2013   #3

Win7 64bits

My... thanks, will take a look a it and see what happens.
My System SpecsSystem Spec


 BSDO After system started

Thread Tools

Similar help and support threads
Thread Forum
Base Filtering Engine could not be started. System Error 5 has occured
When I try and start the BFE through command prompt, it comes up with this error: ***** Microsoft Windows Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:\Windows\system32>NET START BFE The Base Filtering Engine service is starting. The Base Filtering Engine service...
Windows Updates & Activation
Random BSODs on old system, frequent & started only recently.
A old ( 2007-ish ) system of mine has been getting frequent BSODs since a couple of weeks. The BSOD messages are mostly different each time and include "IRQL NOT LESS OR EQUAL", "PFN LIST CORRUPT" and "BAD POOL CALLED". Sometimes it will take a day or so before a BSOD appears, but after a reboot it...
BSOD Help and Support
System issues that started with BSOD - applecharger.sys
Hello all! Let me tell you a little of what I'm experiencing and hopefully you can help me troubleshoot and fix the problem. I tried running iTunes and it locked up on me. So I rebooted and during the reboot I got a BSOD with an error relating to applecharger.sys. I ran the tool "autoruns for...
BSOD Help and Support
System Restore isn't succeed. And windows isn't started!
Hello people. I just joined this forums for a problem I didn't find a solution for. I didn't use my laptop for like 2 days, and then when I started to use it it just freeze while I'm on it. That happened for maybe 5 times and I shut the laptop down every time it freezes. So I did a System...
Backup and Restore
BSODs ever since system was started
Hey guys I am experiencing a lot of BSODs on my system ever since I made it, and I installed Windows 7 Build 7100 64bit on it. Most of the BSODs occur while playing games, especially Burnout Paradise and sometimes it just comes up randomly. I have tried updating drivers and done so, but still the...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:01.
Twitter Facebook Google+