BSOD Memory_Management 0x0000001A

Page 1 of 2 12 LastLast

  1. Posts : 15
    Windows 7 Ultimate N x64
       #1

    BSOD Memory_Management 0x0000001A


    Hi all,

    I've been experiencing numerous BSOD on a new build Zotac ID90 running Windows 7. The BSOD message is always "MEMORY_MANAGEMENT" leading me to suspect that this may be an indication of faulty RAM. I'm about to run a series of memtest86+ tests but wondered if anyone can spot anything else in the various files from the SF Diagnostic tool (attached).

    I might just be imagining this, but it does feel like it occurs most often when I am either heavily using Photoshop or whilst resuming from hibernation.

    Any help would be appreciated.

    Thanks!

    John

    System: Zotac ID90 Bare Bones
    Memory: Crucial 16Gb Kit: CT2KIT102464BF160B
    HDD: OCZ Vertex 4 256GB SSD
      My Computer


  2. Posts : 15,026
    Windows 10 Home 64Bit
       #2

    Most of your bugchecks show 1A Memory Management.
    Please first start with testing RAM.
    ------------------------
    Test and Diagnose RAM Issues with Memtest86+:

       Tip

    • Pay close attention to Part 3 of the tutorial "If you have errors"
    • Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.


    Code:
    MEMORY_MANAGEMENT (1a)
        # Any other values for parameter 1 must be individually examined.
    Arguments:
    Arg1: 0000000000041790, A page table page has been corrupted. On a 64 bit OS, parameter 2
    	contains the address of the PFN for the corrupted page table page.
    	On a 32 bit OS, parameter 2 contains a pointer to the number of used
    	PTEs, and parameter 3 contains the number of used PTEs.
    Arg2: fffffa8000a46580
    Arg3: 000000000000ffff
    Arg4: 0000000000000000
    
    Debugging Details:
    ------------------
    
    
    BUGCHECK_STR:  0x1a_41790
    
    CUSTOMER_CRASH_COUNT:  1
    
    DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
    
    PROCESS_NAME:  MsMpEng.exe
    
    CURRENT_IRQL:  0
    
    LAST_CONTROL_TRANSFER:  from fffff80002f31d40 to fffff80002ec0b80
    
    STACK_COMMAND:  kb
    
    FOLLOWUP_IP: 
    nt! ?? ::FNODOBFM::`string'+35084
    fffff800`02f31d40 cc              int     3
    
    SYMBOL_STACK_INDEX:  1
    
    SYMBOL_NAME:  nt! ?? ::FNODOBFM::`string'+35084
    
    FOLLOWUP_NAME:  MachineOwner
    
    MODULE_NAME: nt
    
    IMAGE_NAME:  ntkrnlmp.exe
    
    DEBUG_FLR_IMAGE_TIMESTAMP:  51db806a
    
    FAILURE_BUCKET_ID:  X64_0x1a_41790_nt!_??_::FNODOBFM::_string_+35084
    
    BUCKET_ID:  X64_0x1a_41790_nt!_??_::FNODOBFM::_string_+35084
    
    Followup: MachineOwner
    ---------
      My Computer


  3. Posts : 15
    Windows 7 Ultimate N x64
    Thread Starter
       #3

    Thanks for the quick response. I'll get the machine running some tests overnight and report back with my findings.
      My Computer


  4. Posts : 15
    Windows 7 Ultimate N x64
    Thread Starter
       #4

    I'm 9 hours into testing and it has successfully completed 2 passes. I see that the guide says I need at least 7 passes - do these need to be completed in one go? Or can they be done in batches? I'm just wondering whether I can stop the testing and use the PC today and then resume testing this evening... and do the same tomorrow, etc until I have 7 passes?
      My Computer


  5. Posts : 24,479
    Windows 7 Ultimate X64 SP1
       #5

    All 7 passes need to be done in one session. The reason is because each successive pass uses a different set of data it reads and writes to the RAM. Many times errors, if any, don't show until the 6th or 7th pass.

    Beside RAM other memory could be at fault, the CPU cache or graphics memory. Does the Zotac use only the Intel on chip graphics? If so, check your BIOS to see if you can allocate more RAM to the IGPU, Integrated Graphics Processing Unit.

    I have 16GB 2133 RAM and memtest takes a bit over 8 hours to run 7 passes. You could contact Corsair about the issues as well, you have to create an account to do it though. http://corsair.force.com/ I don't know your location, this is the US.
    If you are still in the return time for the RAM you can ask for a replacement too.
    Last edited by Britton30; 03 Sep 2013 at 12:26.
      My Computer


  6. Posts : 15
    Windows 7 Ultimate N x64
    Thread Starter
       #6

    It took 24 hours, but I have now completed 8 passes with no errors...

    Zotac do use the onboard graphics and in the bios there are a few options for setting the memory usage. Currently "DVMT 5" memory usage is preallocated 256M and is allowed to go up to 256M. So it looks a little bit constrained.

    Shall I set this to pre-allocate the maximum of 1024M and allow it to use "Max"?
      My Computer


  7. Posts : 15
    Windows 7 Ultimate N x64
    Thread Starter
       #7

    I changed the memory usage of the onboard graphics to prellocate 1024M and to use "Max" as per my previous post. However the csystem has already crashed again with the same BSOD - so I'm guessing that hasn't solved the problem.

    Any ideas on the next steps?

    Thanks,
    John
      My Computer


  8. Posts : 15,026
    Windows 10 Home 64Bit
       #8

    Upload the new reports
      My Computer


  9. Posts : 15
    Windows 7 Ultimate N x64
    Thread Starter
       #9

    Latest reports from the SF Diagnostic tool attached.
      My Computer


  10. Posts : 15,026
    Windows 10 Home 64Bit
       #10

    Reduce the start-up items, Antivirus software is basically whats required.

    ------------------------
    Follow these-
    Arc said:
    Get rid of intel rapid storage.
    1. Right click on "my computer" icon and click "manage" on the context menu.
    2. It will open the "computer management" window.
    3. Select "Device Manager" in the left pane, It will list all the existing devices up.
    4. Expand "Disc Drives" by clicking on the triangle in front of it.
    5. Select one item under it, right click, uninstall.
    6. Continue the process for all items under "Disc Drives"
    7. Now restart the computer. At restart, windows will auto configure the appropriate system driver, msahci.sys.
    writhziden said:
    If you have an SSD, make sure the following are up to date:
    • SSD firmware
    • BIOS Version
    • Chipset Drivers
    • Hard disk controller drivers/SATA drivers
    • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.
    ------------------------
    Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:
    • Click on the
    • Type CMD on Search
    • Left click and Run as Administrator
    • Type SFC /scannow - read here

    Run Disk Check on your Hard Drive for file system errors and bad sectors on it - read here
    ------------------------
    Upload a screenshot using:

    Test your Hard Drive(s) by running:

    ------------------------
    Test your Hardware for Stability and Heat Problems with Prime95:

    ------------------------
    How to Stress Test a Video Card with Furmark:

    ------------------------
    Test your CPU Stability with IntelBurnTest:

    Monitor hardware temperature with system monitoring software like Speccy or HWMonitor. Upload a screen shot of the Summary tab as well:
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 00:50.
Find Us