Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Frequent BSOD problem

06 Sep 2013   #21

Microsoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1


My System SpecsSystem Spec
06 Sep 2013   #22

Microsoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1

new blue screen with "netwew02.sys"
hope it helps...
My System SpecsSystem Spec
06 Sep 2013   #23

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit

Yes, Intel(R) Dual Band Wireless-AC 7260 is failing there, despite of having up-to date drivers. Scan the system for possible virus infection with the following programs.
BTW, I see that Daemon tools is still installed there. May be you are not paying attention to it? And startup items are not reduced too.
My System SpecsSystem Spec

06 Sep 2013   #24

Microsoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1

tcpip.sys this time....
My System SpecsSystem Spec
07 Sep 2013   #25

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit

What are the results of the tests we suggested earlier?
My System SpecsSystem Spec
07 Sep 2013   #26

Microsoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1

sfc chkdsk hdd test memtest is good
antivirus scan nothing
temperature around 50-60
driver verifier returns several blue screen

or maybe i should reinstall win7 and verify drivers one by one..?
My System SpecsSystem Spec
07 Sep 2013   #27

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit

It is network failures over the last three updates. We have seen the same earlier too, a few times, that network is failing without adequate cause. You may go through those discussions if you want.

Software- or Configuration-related Crashes
BOSD after clean up

In the mean time, perform the following tests .....

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

Stress test the CPU.
Hardware - Stress Test With Prime95

*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

Use !analyze -v to get detailed debugging information.

BugCheck D1, {0, 2, 1, fffff88001a598bd}

*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
Probably caused by : memory_corruption

Followup: memory_corruption

0: kd> !analyze -v
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, value 0 = read operation, 1 = write operation
Arg4: fffff88001a598bd, address which referenced memory

Debugging Details:

WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff800030b8100
GetUlongFromAddress: unable to read from fffff800030b81c0
 0000000000000000 Nonpaged pool


fffff880`01a598bd 6c              ins     byte ptr [rdi],dx






TRAP_FRAME:  fffff80000b9bbb0 -- (.trap 0xfffff80000b9bbb0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffffa8015f96640 rbx=0000000000000000 rcx=0000000000000004
rdx=fffff88001b68128 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88001a598bd rsp=fffff80000b9bd40 rbp=fffff88001b69800
 r8=fffff88001b69800  r9=fffff88001b6e9a0 r10=0000000000000010
r11=0000000000000002 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl zr na po nc
fffff880`01a598bd 6c              ins     byte ptr [rdi],dx ds:00000000`00000000=??
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80002e80129 to fffff80002e80b80

fffff800`00b9ba68 fffff800`02e80129 : 00000000`0000000a 00000000`00000000 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx
fffff800`00b9ba70 fffff800`02e7eda0 : fffff880`0664d600 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
fffff800`00b9bbb0 fffff880`01a598bd : 00000000`00000000 fffff880`01b69800 fffff800`00b9be40 fffff880`05930627 : nt!KiPageFault+0x260
fffff800`00b9bd40 fffff880`01a58e39 : 000000f4`00870000 fffff800`00b9beb1 fffff800`00b9be30 fffff800`00b9be30 : tcpip!IppProcessDeliverList+0xdd
fffff800`00b9bde0 fffff880`01a56adf : 00000000`00000000 00000000`16682401 fffff880`01b69800 fffff880`01b69800 : tcpip!IppReceiveHeaderBatch+0x23a
fffff800`00b9bec0 fffff880`01a560b2 : fffffa80`16681b80 00000000`00000000 fffffa80`16682401 00000000`00000007 : tcpip!IpFlcReceivePackets+0x64f
fffff800`00b9c0c0 fffff880`01a554da : fffffa80`16682460 fffff800`00b9c1f0 fffffa80`16682460 00000000`00000001 : tcpip!FlpReceiveNonPreValidatedNetBufferListChain+0x2b2
fffff800`00b9c1a0 fffff800`02e8c878 : fffffa80`165e2670 00000000`00004800 fffff800`03009cc0 00000000`00000000 : tcpip!FlReceiveNetBufferListChainCalloutRoutine+0xda
fffff800`00b9c1f0 fffff880`01a55bd2 : fffff880`01a55400 00000000`00000000 fffffa80`14249b02 00000000`00000000 : nt!KeExpandKernelStackAndCalloutEx+0xd8
fffff800`00b9c2d0 fffff880`018c20eb : fffffa80`1668a8d0 00000000`00000000 fffffa80`163bd1a0 fffffa80`163bd1a0 : tcpip!FlReceiveNetBufferListChain+0xb2
fffff800`00b9c340 fffff880`0188bad6 : fffff880`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : ndis!ndisMIndicateNetBufferListsToOpen+0xdb
fffff800`00b9c3b0 fffff880`01805ac1 : fffffa80`163bd1a0 00000000`00000002 00000000`00000007 00000000`00000000 : ndis!ndisMDispatchReceiveNetBufferLists+0x1d6
fffff800`00b9c830 fffff880`052cac84 : fffffa80`16572000 00000000`00000000 00000000`00000000 fffffa80`165e2670 : ndis!NdisMIndicateReceiveNetBufferLists+0xc1
fffff800`00b9c880 fffffa80`16572000 : 00000000`00000000 00000000`00000000 fffffa80`165e2670 fffffa80`00000001 : Rt64win7+0x1ac84
fffff800`00b9c888 00000000`00000000 : 00000000`00000000 fffffa80`165e2670 fffffa80`00000001 fffff880`01a674d0 : 0xfffffa80`16572000


CHKIMG_EXTENSION: !chkimg -lo 50 -d !tcpip
    fffff88001a598bc - tcpip!IppProcessDeliverList+dc
    [ 8b:9b ]
1 error : !tcpip (fffff88001a598bc)

MODULE_NAME: memory_corruption

IMAGE_NAME:  memory_corruption

FOLLOWUP_NAME:  memory_corruption





Followup: memory_corruption

0: kd> lmvm rt64win7
start             end                 module name
fffff880`052b0000 fffff880`05382000   Rt64win7 T (no symbols)           
    Loaded symbol image file: Rt64win7.sys
    Image path: Rt64win7.sys
    Image name: Rt64win7.sys
    Timestamp:        Wed Apr 10 08:30:34 2013 (5164D5D2)
    CheckSum:         000DB44C
    ImageSize:        000D2000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
My System SpecsSystem Spec
18 Dec 2013   #28

Microsoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1

sorry for pushing a very old post
I think I solve the problem but I don't know what I did to my computer, and I wish to know what happen

after some try and error,I find my computer run stably using only 2 RAMs
at first the computer comes with three RAMs (and keep on bsod while both three RAMs are installed)
I randomly pick two of them and install to two slot randomly (I'd try quite a lot of combinations)
the computer running very well for a week
then I install all three RAMs, and the bsod happen again
I think all three RAMs and four slot are good if they stand alone, but when they all go together something happens

I not sure what is going wrong, are there a similar problem happen before?
is there any setting goes wrong? or should I buy one more RAM and test the computer while all four RAMs install?
My System SpecsSystem Spec
18 Dec 2013   #29

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit

It is not an unique situation. Many a times it is seen that when more than two DIMMs are occupied the computer BSODs, despite of all RAMs are individually good.

That is an issue of the motherboard's part only. If it is a must for you to use more than two RAM sticks, contract the board manufacturer and RMA it.
My System SpecsSystem Spec

 Frequent BSOD problem

Thread Tools

Similar help and support threads
Thread Forum
Problem with BSOD arising randomly. Problem more frequent. NTSF.SYS
Having an issue with a computer going into BSOD with no warning. The computer's information is attached. There really isn't any more information to give. It started relatively recently. Nothing different was downloaded to the computer. AVAST is not installed. Not utilizing Daemon tools. Any...
BSOD Help and Support
BSOD randomly, recent problem, increasingly frequent
This is an old computer I built myself around 8 years ago. Started getting BSOD about a month ago. Just happened once and didn't think much of it. Got another one a couple weeks later, another about a week later, and then this weekend the computer hits a BSOD any time I try to do much of anything....
BSOD Help and Support
Semi frequent BSOD problem
So I had some BSOD problems back at the beginning of the year, but managed to resolve them. But lately I've been getting crashes again, about 5 in May alone. I'm not sure what's causing them, it doesn't happen when any particular program is running, sometimes it happens when I'm not even on the...
BSOD Help and Support
Frequent BSOD playing SimCity / Frequent applications crashing
Hello, This has all started since installing EA's Origin in order to play SimCity and Battlefield 3, the later crashes with a BSOD Stop 0x0000001 within about 1 minute of starting, SimCity will give me up to an hour before BSOD'ing. It's 50:50 whether it's a BSOD or a 'SimCity has stopped...
BSOD Help and Support
Windows 7 32-bit BSOD (Frequent Problem)
Hello, I've been wrestling with this problem for quite some time now, and this is the latest in a series of stop errors. I've been getting these assorted errors for the past two years now, averaging 1-3 BSOD's a day. Here's the latest Problem Event Name: BlueScreen OS Version: ...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:59.
Twitter Facebook Google+