BSOD while playing games and sometimes just browsing

Lighta said:

I updated my Windows to SP1.

You have not completed as suggested.

Code:

Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.17273.amd64fre.win7_gdr.130318-1532
Machine Name:
Kernel base = 0xfffff800`02851000 PsLoadedModuleList = 0xfffff800`02a8de70
Debug session time: Thu Sep 19 22:19:59.310 2013 (UTC + 3:00)
System Uptime: 0 days 1:23:09.385

Summary:

Code:

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

BugCheck 24, {1904fb, fffff880063c4078, fffff880063c38e0, fffff8800124fd35}

Probably caused by : Ntfs.sys ( Ntfs!memcpy+1e5 )

Code:

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

BugCheck 50, {ffffff00028d7b98, 8, ffffff00028d7b98, 7}


Could not read faulting driver name
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+4038b )

Please follow through:

YoYo155 said:

Testing the HDD:

1. Perform a Disk Check | Disk Check
2. Then Post the results following | THIS METHOD
3. Download SeaTools for Windows if you don't want to use a CD to test the HDD you can use YUMI – Multiboot USB Creator to create a bootable USB (instructions are found at the bottom of both pages).
4. If SeaTools for Windows is unable to recognize your HDD visit HDDdiag and follow the instructions.

Afterwards update your PC to SP1:

• Learn how to install Windows 7 Service Pack 1 (SP1)

Reset the BIOS back to default in case you're unaware that your CPU is overclocked:

• CLR CMOS

   Note

Write down the current value of the SATA Mode!
Its either AHCI or IDE.
After resetting the CMOS go back and verify the value for SATA Mode is what it was
when the OS was installed.

   Note

If any component is overclocked reset it back to stock speeds!

Code:

!sysinfo cpuspeed
CPUID:        "Intel(R) Core(TM)2 Quad CPU    Q6700  @ 2.66GHz"
MaxSpeed:     2660
CurrentSpeed: 2664

Post back with the results :) .

Just to add you should test the RAM as well.

koolkat77 said:

Test and Diagnose RAM Issues with Memtest86+:

• RAM - Test with Memtest86+

   Tip

• Pay close attention to part 3 of the tutorial "If you have errors"
• Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.

Post a picture with the results.

And?
Did you complete any of the suggestions?

Please upload a new file generated by the SFDT every couple of crashes.
Now would be good as well.

Yep you have a RAM problem, now we need to determine which is faulting.
This might help you determine what and which of the two is bad, the stick, the slot or both.

Arc said:

No code has to be inserted here. It is a RAM, a bad RAM.

But if you have got a result like that:
No code has to be inserted here. It is a motherboard issue. The particular slot is bad.

That's right, we need to know which of the four is bad.
Read part three of the tutorial for more information along with the chart posted above.
RAM - Test with Memtest86+