Code:
AODDriver2.sys Thu Apr 5 15:23:37 2012 (4F7D6499)
GIGABYTE On/Off Charge driver - May cause BSOD on Win7/8 systems. Uninstall to test.
Code:
AppleCharger.sys Mon Jan 10 15:57:29 2011 (4D2AD809)
Information
Download
and
install Revo Uninstaller.
- Opt for "Advanced Mode" and uninstall the software (also delete the leftover registry entries).
Based on the bugchecks, I would recommend you follow and complete the steps given below:
1. If you are overclocking any hardware, please stop. Reset any changed values back to default and reset/clear CMOS:
Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS. Uninstall any overclocking tool as these can also be a reason of blue screens.
2. Uninstall your current antivirus software. It can be a cause of BSOD very often. Please remove it with its removal tool and use Microsoft Security Essentials in its place. Malwarebytes is a great combination with it. Go through
this thread for more info.
3. Run
Disk Check with both boxes checked for all HDDs and with Automatically fix file system errors. Post back your logs for the checks after finding them using
Check Disk (chkdsk) - Read Event Viewer Log
4. Run
SFC /SCANNOW Command - System File Checker to check windows for integrity violations. Run it up to three times to fix all errors. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations.
5. Make scans with
Kaspersky TDSskiller and
ESET Online scanner.
6. Perform a
Clean Start up, this will help avoid any problematic applications from bugging the system.
7. Use
Revo Uninstaller Free to uninstall stubborn software. Opt for Advanced Mode and uninstall the software, delete the leftover registry entries.
8. Use
Crystal Disk Info to
upload a screenshot of your Hard Drives (s). Test your Hard Drives (s) running a
Hard Drive Diag.
9. Test and Diagnose RAM issues with
RAM - Test with Memtest86+. Pay close attention to Part 3 of the tutorial "If you have errors" Take the test for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.
Update the ATI graphics driver from here: Download AMD Catalyst Drivers 13.9 Windows 7 - FileHippo.com (choose 64bit for yourself)
Code:
atikmpag.sys Fri Mar 29 07:09:45 2013 (5154E9D9)
atikmdag.sys Fri Mar 29 08:27:04 2013 (5154FBF8)
------------------------
To perform a clean install of a driver, follow this tutorial:
Code:
Built by: 7601.18229.amd64fre.win7sp1_gdr.130801-1533
Debug session time: Sun Sep 22 01:02:18.834 2013 (UTC + 6:00)
System Uptime: 0 days 0:01:22.334
BugCheck 116, {fffffa8010870010, fffff8800533dcf0, 0, 2}
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
Probably caused by : atikmpag.sys ( atikmpag+acf0 )
BUGCHECK_STR: 0x116
PROCESS_NAME: System
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.18229.amd64fre.win7sp1_gdr.130801-1533
Debug session time: Sun Sep 22 00:55:21.422 2013 (UTC + 6:00)
System Uptime: 0 days 0:00:44.922
BugCheck 116, {fffffa800f3e7010, fffff88002f4acf0, 0, 2}
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
Probably caused by : atikmpag.sys ( atikmpag+acf0 )
BUGCHECK_STR: 0x116
PROCESS_NAME: System
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.18229.amd64fre.win7sp1_gdr.130801-1533
Debug session time: Sun Sep 22 00:43:39.832 2013 (UTC + 6:00)
System Uptime: 0 days 0:00:57.332
BugCheck 116, {fffffa8010985360, fffff8800731fcf0, 0, 2}
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
Probably caused by : atikmpag.sys ( atikmpag+acf0 )
BUGCHECK_STR: 0x116
PROCESS_NAME: System
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.18229.amd64fre.win7sp1_gdr.130801-1533
Debug session time: Sun Sep 22 00:42:05.736 2013 (UTC + 6:00)
System Uptime: 0 days 20:26:08.236
BugCheck 116, {fffffa80127f54e0, fffff88002d6dcf0, 0, 2}
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
Probably caused by : atikmpag.sys ( atikmpag+acf0 )
BUGCHECK_STR: 0x116
PROCESS_NAME: System
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``