Memory_management error 0x0000001a

Hello Needle1312,

My previous post was edited by an administrator, there is no need to reupload your msinfo as it is already included in your OP message.

----------

Please reduce the items that run at start up. You basically only need your anti virus to run at start up, all other programs are not necessary and can be removed from the start up list.
Check this tutorial to see how to add or remove start up items.

----------

Both dump files point to the following cause;

Code:

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1A, {31, fffffa8003f80900, fffff8800447b000, fffff8a01205813e}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::NNGAKEGL::`string'+71d1 )

Followup: MachineOwner
---------

Bug Check 0x1A_41790.
Usual causes: Failing RAM.
More info Bug Check 0x1A.

Please attach all RAM sticks and do the following;
Please run Memtest86+ to test your RAM for issues.

   Tip

Let Memtest run for at least 10 passes and preferably overnight as it may take very long to complete.
Especially read part three of the tutorial, which explains you to test each RAM stick in all DIMM slots to filter out failing slots.

Arc said:

Suppose you have got the result like that:
No code has to be inserted here. It is a RAM, a bad RAM.

But if you have got a result like that:
No code has to be inserted here. It is a motherboard issue. The particular slot is bad.

----------

Please use the SFC /SCANNOW command as displayed in option two of this tutorial.

1. Click on the .
2. Open an elevated command prompt.
3. Type "SFC /SCANNOW" without the quotations.
4. Let SFC do it's thing, and then prompted to, restart.
   
   If SFC found and repaired anything, please do the following:
5. When restarted, open an elevated command prompt.
6. Type (or copy) the following, this will create a .txt file on your desktop;
   findstr /c:"[SR]" %windir%\Logs\CBS\CBS.log >"%userprofile%\Desktop\sfcdetails.txt"
7. In your next reply, please attach this file using the method displayed in this tutorial.

----------

If you are unable to boot into Windows, please use the following method instead of the one displayed above;
Please use the SFC /SCANNOW command at boot as shown in option one of this tutorial.

   Note

You will need either your original Windows Installation disc or a Repair Disc for this to work.

1. First change the Boot order so that DVD's boot before Windows does.
2. Insert either your installation or repair disc in your machine.
3. Navigate to the System Recovery Options, and once there, click on Command Prompt.
4. In command prompt, please type the following;
   sfc /scannow /offbootdir=f:\ /offwindir=f:\windows
   Replace F: with the letter where Windows is installed on!
5. SFC will now attempt to search for integrity violations and fix those found.
6. Once done, please type "Exit" and hit ENTER to exit command prompt.
7. To restart, remove the DVD and select Restart from the menu.
   
   If SFC found and repaired any violations, please do the following;
8. When restarted, open an elevated command prompt.
9. Type (or copy) the following, this will create a .txt file on your desktop;
   findstr /c:"[SR]" %windir%\Logs\CBS\CBS.log >"%userprofile%\Desktop\sfcdetails.txt"
10. In your next reply, please attach this file using the method displayed in this tutorial.

Good luck and keep us posted,
Nommy

Hello Needle1312,

Glad that we could be of assistance in solving your issue:)

After replacing the faulty RAM module, please rerun Memtest to check the new RAM for possible issues.


Good luck,
Nommy