BSOD randomly happening rar file attached

Hello :) thanks for the update.

The bugchecks are much clearer now thanks to driver verifier !

Code:

BugCheck D1, {fffff880065834b5, 2, 8, fffff880065834b5}

*** WARNING: Unable to verify timestamp for sbw.sys
*** ERROR: Module load completed but symbols could not be loaded for sbw.sys
Probably caused by : sbw.sys ( sbw+84b5 )

• Driver Reference Table - sbw.sys

Follow this tutorial on how to disable Driver Verifier;

• Driver Verifier - Enable and Disable

Uninstall Speedbit Download Accelerator using RevoUninstaller ,remove all remaining files and registry keys using the advanced option.

Once you have successfully removed Speedbit, follow the instruction on how enable Driver Verifier
the same way you have the first time, post #8.

Keep us posted.

Attach the new dumps then :) .

Thanks for the feedback :) .
As you said it crashed while watching TV;

Code:

BugCheck 1000007E, {ffffffffc0000005, fffff8000f261407, fffff88003754538, fffff88003753d90}

*** WARNING: Unable to verify timestamp for cpsbda.sys
*** ERROR: Module load completed but symbols could not be loaded for cpsbda.sys
Probably caused by : ks.sys ( ks!CKsPin::TransferKsIrp+f5 )

Code:

lmvm cpsbda
start             end                 module name
fffff880`06042000 fffff880`06068000   cpsbda   T (no symbols)           
    Loaded symbol image file: cpsbda.sys
    Image path: \SystemRoot\System32\Drivers\cpsbda.sys
    Image name: cpsbda.sys
    Timestamp:        Tue Jan 18 07:39:58 2011

Code:

cpsbda    Compro DVB Receiver    c:\windows\system32\drivers\cpsbda.sys

I wasn't able to pinpoint the exact matching driver, but please update the appropriate one.
If you're having trouble finding an update post more information about the product and I will help :) .

Now I see you have enabled driver verifier again but the dump above wasn't induced by it
as the other two were. Those point to core Windows component ntkrnlmp.exe which is usually
pointing to hardware issue but judging the stack I don't believe that to be the case this time.
The fault seems to be of a couple of driver verifier settings and other
didn't have much in terms of a stack to look at.

Code:

!verifier

Verify Level fbb ... enabled options are:
    Special pool
    Special irql
    All pool allocations checked on unload
    Io subsystem checking enabled
    Deadlock detection enabled
    DMA checking enabled
    Security checks enabled
    Force pending I/O requests
    IRP Logging
    Miscellaneous checks enabled

Please disable driver verifier restart the PC and enable driver verifier
following this TUTORIAL | But using these settings:

1. Go to Start and type in "verifier" (without the quotes) and press Enter
2. Select "Create custom settings (for code developers)" and click "Next"
3. Select "Select individual settings from a full list" and click "Next"
4. Select everything EXCEPT FOR "Low Resource Simulation", "Force Pending I/O Requests", "IRP Logging" and click "Next"
5. Select "Select driver names from a list" and click "Next"
6. Then select all drivers NOT provided by Microsoft, Unknown, or Macrovision and click "Next"
7. Select "Finish" on the next page.

Keep us posted :) .

Hi :)
It's the same bugcheck as before, in this case Verifier is no help unfortunately.

Code:

BugCheck E1, {fffff8000f5bfad0, 2, fffff9800b4e4fc0, fffff9800b4e4fc0}

Probably caused by : ntkrnlmp.exe ( nt!IopProcessWorkItem+0 )

Please disable driver verifier | Driver Verifier - Enable and Disable


Please follow:

writhziden said:

• If you have an SSD, make sure the following are up to date:
  
  • SSD firmware
  • BIOS Version
  • Chipset Drivers
  • Hard disk controller drivers/SATA drivers
  • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.
  
  
• Check Windows for corruption. Run SFC /SCANNOW Command - System File Checker up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations. Use OPTION THREE of SFC /SCANNOW Command - System File Checker to provide us with the sfcdetails.txt file if errors occur.

• Download SSD Toolkit (version 1.0.0.1) (19MB)

   Warning

Flashing the BIOS is a risky procedure. If you are uncomfortable
performing it yourself, have a technician perform it on your behalf.
Regardless, flashing is at your own risk.

Update the BIOS: F9 3.68 MB 2012/09/27 Asia | China | America | Europe : FTP / Http

• Update the intel drivers using this online utility :: Intel® Driver Update Utility ::
• SATA AHCI :: Asia China America Europe: FTP / Http

Please post back with the results.