BSOD when do nothing, watching, playing (randomly) x116

blackstrike · 09 Oct 2013

sfc scannow is no problem

thermal paste, every 2-4 months i change, no problem temp cpu and gpu

mse is no problem updating and updated today

speecy is uloaded in rar, but i not yet save after playing high res game

i just reinstalled amd driver to 12.4. before, i had 13.1 and the atikmpag.sys is different date now, although it was older i never get bsod. and i just recheck the 13.1 is not supported my vga [HD 4600] i dunno why in AMD driver web it supported, but in release note, not supported

and about furmark, i really dont have courage to 'burn' my vga

1 minute it go 74C. and im playing bf3 and dota 2-4 hours just 74C max temp

i will keep post until this solved, thanks for helping me, much and really appreciated

nommy the first · 09 Oct 2013

Hello Blackstrike,

Thanks for the update. :)

----------

Can you please upload the Speccy screenshots as described in step three and four in my previous post (as an image, rather than a .speccy file)?

Regarding Furmark, I understand it that you don't want to do that, but regardless, 74C is very high, so you might want to consider doing it anyway.

----------

Purely for information, please download GPU-Z;

Download the latest version from one of the available servers.
Double click on the downloaded file, accept the UAC prompt and select the second option; No. Use GPU-Z as stand alone program.
Using the drop down arrow, select the ATI Radeon HD 4600.
Click on the photo camera in the upper right corner, and select Save to file.
Save it on the desktop as GPU-Z output.
Upload the image by following this tutorial.

----------

Do keep us posted please. It could very well have been an issue with the 13.1 driver, since it's not supported by your GPU.

Do you maybe have a spare GPU lying around to see if the problem is also present while using that one?

Good luck and keep us posted,
Nommy

blackstrike · 09 Oct 2013

too bad i dont have any spare amd gpu , i get nvidia gt 430 on other computer

and furmark, so how many minutes / C i should stop if not bsod. i really dont want 'burn' my vga, because my friend warned me to use furmark. but if i can get rid this bsod [so far after reinstalled old driver good to run] i will do it

idle
Attachment 288987

4 hours run and idling
Attachment 288988

Attachment 288989

nommy the first · 09 Oct 2013

Hello Blackstrike,

Thanks for the info, both Speccy and GPU-Z look fine.

----------

Regarding Furmark, you can stop the test whenever you want. I'd recommend that you let the temps get as high as you are comfortable with, and in the mean while look out for artifacts.

----------

If you decide to run Furmark and it turns out clear, use your system for a few days to see if the problems persist. If they don't, please report back and mark the thread as solved.
If they do persist, please report back with a fresh scan of the SF Diagnostic Tool.

Good luck and keep us posted,
Nommy

blackstrike · 09 Oct 2013

Attachment 288996

so far so good, 5 minutes pass , max temp 82C

if in a week no bsod , i will mark as solved

nommy the first · 09 Oct 2013