BSOD while running BF3, many different codes

SubtleNachos · 06 Oct 2013

So, for about a year I've had my system overclocked I've been reverting my overclocks since I've been running into issues while playing Battlefield 3. With my system at stock settings I'm still getting blue screens. I noticed my pagefile is about 8 gb (could that be a problem?) anyways, attached are the dump files in one zip file, all and any input is greatly appreciated :)

Arc · 08 Oct 2013

Hi SubtleNachos.

Logitech SetPoint Unifying KMDF USB Filter driver. Those are failing.

Code:

fffff880`030afe48  fffff880`06835010Unable to load image \SystemRoot\system32\DRIVERS\LHidFilt.Sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for LHidFilt.Sys
*** ERROR: Module load completed but symbols could not be loaded for LHidFilt.Sys
 LHidFilt+0xc010
-----------------------------------------------------------------------------------------
fffff880`030b0058  fffff880`06801c01Unable to load image \SystemRoot\system32\DRIVERS\LEqdUsb.Sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for LEqdUsb.Sys
*** ERROR: Module load completed but symbols could not be loaded for LEqdUsb.Sys
 LEqdUsb+0x1c01

And the drivers are old.

Code:

fffff880`06bb5000 fffff880`06bcc000   LEqdUsb    (deferred)             
    Image path: \SystemRoot\system32\DRIVERS\LEqdUsb.Sys
    Image name: LEqdUsb.Sys
    Timestamp:        Fri Sep 02 11:52:56 2011 (4E607640)
    CheckSum:         0001C3A8
    ImageSize:        00017000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Update your Logitech devices drivers from http://www.logitech.com/en-us/support.

The display driver is causing continuous issue there. Uninstall the current installed one using AMD Catalyst Un-install Utility and then try catalyst 13.4 WHQL, as it is known to be stable.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy.

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator
Also let us know the wattage of the PSU.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the results.