BSOD viewing online video -Locale ID = 1033 & BCCode = 116


  1. Posts : 37
    Windows 7 Pro 64bit
       #1

    BSOD viewing online video -Locale ID = 1033 & BCCode = 116


    Hello,

    I got the BSOD just as an Advertisement was ending while attempting to watch a news video linked on MSN's main page. I have attached the dump file info as instructed. Thanks in advance for your help!
      My Computer


  2. Posts : 3,056
    Windows 10
       #2

    Hello and welcome :) .
    A TDR (Timeout Detection Recovery) is not a bugcheck in the true sense in that something
    has went terribly wrong in the kernel which forced the machine to crash.
    TVeblen said:
    "Display driver xxxxx stopped responding and was recovered"

    Timeout Detection & Recovery (TDR) = "Display Driver Stopped Responding and was Recovered" is a useful feature that started in Vista and is also in W7 that allows the OS to try and recover from a video timeout so that the system does not crash to a bluescreen. Symptoms included a screen flash with the TDR message appearing one or more times or the screen blinking out to black. If the system cannot recover it will crash (Stop Error 116 typical). The issue is that the video card is not responding as expected. The solution is in the: why?

    There is no one-size-fits-all solution to TDR errors. But the problem is usually found in the local environment (your computer). Finding the cause is a matter of checking every possible cause and uncovering the culprit through a simple process of elimination. By methodically running down a checklist of diagnostic procedures you should be able to find the cause and can correct it.

    There are numerous reports of hardware solutions to TDR's. The most common are:

    • Poor Cooling
    • Problems with the power supply
    • Overclocking Issues
    • Bad System memory or incorrect memory timings
    • Defective PC Components



    Bugcheck:

    Code:
    BugCheck 116, {fffffa801301a4e0, fffff88004c07a1c, 0, 2}
    
    Unable to load image atikmpag.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for atikmpag.sys
    *** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
    Probably caused by : atikmpag.sys ( atikmpag+7a1c )
    The driver is pretty old!
    Code:
    lmvm atikmpag
    start             end                 module name
    fffff880`04c00000 fffff880`04c51000   atikmpag T (no symbols)           
        Loaded symbol image file: atikmpag.sys
        Image path: atikmpag.sys
        Image name: atikmpag.sys
        Timestamp:        Wed May 25 05:25:42 2011
    The Asus website doesn't offer any tangible updates (update to the 26.12.2011 update if the AMD
    website fails to offer anything better)
    Try AMD first :: AMD Driver Autodetect ::
    Asus :: ASUS 8_861_Asus_Vista_Win7_WHQL ::

    Also you have your onboard graphics enabled as well, is that for a particular reason?

    Post back with the results.
      My Computer


  3. Posts : 37
    Windows 7 Pro 64bit
    Thread Starter
       #3

    Thanks for the reply YoYo155. I don't imagine it will take a tremendous amount of troubleshooting since I just installed a new video card the day before the error...lol. I appreciate your help! I will go back to my previous graphics card, and strongly suspect this will correct the issue.
      My Computer


  4. Posts : 3,056
    Windows 10
       #4

    Ahh I see, Thanks for the update :) .
    For other issues we are here :).
      My Computer


  5. Posts : 37
    Windows 7 Pro 64bit
    Thread Starter
       #5

    Thanks Again. Sorry for the very delayed reply, but it was the video card. I purchased a new video card & all is well (except some of the settings for my multiple displays change when the system comes out of standby). I have a feeling that this little issue will take some trial & error -on my part- to resolve. You guys are great...I really appreciate the help!
      My Computer


  6. Posts : 3,056
    Windows 10
       #6

    Thanks for the confirmation, enjoy your stay :) .
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 20:05.
Find Us