BSOD Normal PC usage, error "clock interval not received"


  1. Posts : 4
    Windows 7 Home Premium 64bit
       #1

    BSOD Normal PC usage, error "clock interval not received"


    Lately I have been having these BSOD "A clock interrupt was not received on a secondary processor within the allocated time interval."

    This is when using the PC in a normal way (like browsing, checking email), nothing intensive
    After the restart, everything works fine, and I receive no more BSOD, untill I start up my pc the next day.

    the crash happens withing 5-10minutes after I start to use it.

    I have already done the diagnostics tool, and added the result.

    my specs are:
    WIN7 home premium 64bit
    intel core i7-3820 @ 3.60 GHZ (x8)
    MSI MS7760
    16GB ram
    firefox 24.0 (I always have this running, but it noticably crashes when I'm using it actively)


    I would appreciate some help in this matter.
    On a side note, I'm interested in what a clock interrupt is, and does.
      My Computer


  2. Posts : 3,056
    Windows 10
       #2

    Welcome to SF :) .

    Unfortunately the uploaded file doesn't contain recent dumps.
    The other thing we need is the kernel dump because you are describing bugcheck 0x101 which
    can not be analyzed using a minidump.

    Please follow this tutorial to confirm you have Windows set to create a Kernel Dump (#7)
    then look in the system root folder for a file called MEMORY.dmp and upload it using
    an online hosting service the likes of dropbox or skydrive.



    The file should be located in this folder:
    Code:
    C:\Windows\MEMORY.dmp
      My Computer


  3. Posts : 4
    Windows 7 Home Premium 64bit
    Thread Starter
       #3

    I guess I'll have to wait for the next BSOD then...
      My Computer


  4. Posts : 4
    Windows 7 Home Premium 64bit
    Thread Starter
       #4

    set up the kernel dump, but after the recent BSOD, it didn't create one... is it possible that the dump wasn't created due to compressing the files on the C drive? :/
      My Computer


  5. Posts : 3,056
    Windows 10
       #5

    Sorry for the late reply !
    Well I don't think so I've never encountered that to be the case.
    You can go through this check list of things to verify in-order to be able to generate a dump.

      My Computer


  6. Posts : 4
    Windows 7 Home Premium 64bit
    Thread Starter
       #6

    had a different BSOD the other day, but it keeps getting stuck on Initializing the memory dump. I can go away and return after 5 hours, and it will still sit there on initializing... and the last dump dates from Feb 3rd... :/
      My Computer


  7. Posts : 3,056
    Windows 10
       #7

    Hmm, did you happen to catch the bug check codes?

    I would test the hardware starting with the RAM and HDD as well as going through the check list for the SSD.

    writhziden said:
    • If you have an SSD, make sure the following are up to date:
      • SSD firmware
      • BIOS Version
      • Chipset Drivers
      • Hard disk controller drivers/SATA drivers
      • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.

       Warning
    The Following Method Should NOT Be Performed On An SSD!


    Testing the HDD:


    1. Perform a Disk Check | Disk Check- Scroll down to OPTION TWO of the tutorial and use the /R switch in the CHKDSK command | chkdsk C: /R.
    2. Then Post the Disk Check results following | This Tutorial.
    3. Once back in Windows, download Crystal Disk Info and post a screenshot (multiple shots if you have more than one drive).
    4. Download SeaTools for DOS if you don't want to use a CD to test the HDD you can use YUMI – Multiboot USB Creator to create a bootable USB (instructions are found at the bottom of both pages).
    5. If SeaTools for DOS is unable to recognize your HDD:
    6. Visit HDDdiag and follow the instructions | Or follow the instructions below.

    If SeaTools For DOS does not recognize the drive;
    Boot into the BIOS using the *Fx key.
    Look for an entry called SATA Mode (or something similar), it should be set to IDE / AHCI.
    It's probably set to AHCI which is why SeaTools doesn't recognize them in the DOS environment.
    Set it to IDE then save and exit usually by pressing the F10 key.
    Now boot into SeaTools and it should detect the drives.
    Start the Long Test and let it run.
    Upon completion don't try to boot into Windows as it will only result in a BSOD, go back into the BIOS
    and change the SATA setting back to what it was in the first place.



    Arc said:
    Re-seat the sata and power.

    Testing the RAM:

    koolkat77 said:
    Test and Diagnose RAM Issues with Memtest86+:

       Tip

    • Pay close attention to part 3 of the tutorial "If you have errors"
    • Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.

    When done with the testing procedure take a picture and upload it here.
    Let us know the results.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 13:00.
Find Us