Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD On Windows Logo

18 Oct 2013   #1

windows 7 professional x32
BSOD On Windows Logo

My system first started to do some weird glitches like holds up for a few moments, than my mouse icon get weird graphics. So upon seeing some things I did Verifier and bam BSOD on the windows logo screen right away and a few times after so I know it a driver. I turn off Verifier and here is my Dump file.
Also attach is my SF_Diagnostic_Tool information attach, I updated all my drivers so not sure what else needs to update, any thoughts?

My System SpecsSystem Spec
18 Oct 2013   #2

Windows 10

Hello :) .

The single minidump file isn't much to determine a pattern, the kernel dump is the same one.
You had only one crash and it was with driver verifier enabled,
I don't see how that has anything to do with the mouse cursor having glitches.
What I really think that is happening is the buggy nVidia drivers which are to blame.

Driver Verifier has pointed MBfilt64.sys as an offender, the driver is pretty old, you can update it
but I don't think it's the real issue.

BugCheck A, {0, 2, 0, fffff800030d9e52}

*** WARNING: Unable to verify timestamp for MBfilt64.sys
*** ERROR: Module load completed but symbols could not be loaded for MBfilt64.sys
Probably caused by : MBfilt64.sys ( MBfilt64+1817 )
lmvm MBfilt64
start             end                 module name
fffff880`06f6c000 fffff880`06f7a000   MBfilt64 T (no symbols)           
    Loaded symbol image file: MBfilt64.sys
    Image path: \SystemRoot\system32\drivers\MBfilt64.sys
    Image name: MBfilt64.sys
    Timestamp:        Fri Jul 31 06:40:32 2009

You're using 327.23.

Name    NVIDIA GeForce GTX 460
Driver Version
Please follow the quote below on how to roll back to a more stable version.

Quote   Quote: Originally Posted by Arc View Post
Install the 314.22 WHQL only.

  • Uninstall All nvidia items in Control Panel > Programs and features
    • 3D Vision Control Driver
    • 3D Vision Driver
    • Graphics Driver
    • HD Audio Driver
    • PhysX
    • nvidia Update
    (Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
  • Now follow Drivers - Clean Left over Files after Uninstalling
  • Boot normally now. Download 314.22 WHQL. While installing, Select Custom (Advanced) install. In the next page, follow this settings:

Let us know the results.

As the quote says, let us know the results :) .
My System SpecsSystem Spec
18 Oct 2013   #3

windows 7 professional x32

Roll back, I let you know if there is any more glitches with the stuff.
My System SpecsSystem Spec

18 Oct 2013   #4

Windows 10

Ok thanks, keep us updated :) .
My System SpecsSystem Spec

 BSOD On Windows Logo

Thread Tools

Similar help and support threads
Thread Forum
a permanent bsod after windows 7 logo
Hello I am using windows 7 SP1 ,I am using this version for over than 2 years now and never faced this problem,now I am getting a permanent Bsod 0x0000006B after windows logo. I made some investigations and read a lot about the problem all over the internet and still can't figure out how to...
BSOD Help and Support
BSOD after Windows Logo
Hi I bought a new PC case and have fitted everything from the old case to the new case (No new hardware, just a straight swap). All plugged in and wired up etc but seem to be having a problem booting to my SSD. Boot up PC and BIOS recognizes the SSD. Then it tries to boot into Windows and...
Hardware & Devices
BSOD after Windows 7 logo
I just installed windows 7 on a fresh Hard disk on one computer. I put the hard drive into my other computer and after the windows logo it shows a BSOD (even in safe mode). The error code is "STOP: 0x0000007B (0xFFFFF880009A9928, 0xFFFFF880009A9928, 0x000000000... etc)" What do I do; as I...
Installation & Setup
BSOD after Windows Logo
Hey guys... So my sister's laptop crashed after she started some game she didn't play in ages (Sims). It won't load the windows after the Windows logo. Only a BSOD. I can't go into safe mode, also I tried to restore to some restore point via the Windows Recovery which I can access. Any ideas? I...
BSOD Help and Support
BSOD After windows 7 logo
i had recently reformatted my friends computer and installed w7 ulti x86, and it had been workig fine for a while but now its constantly BSOD right after the w7 loading bar so i dont know how i can get minidumps it also does it if i boot in safe mode. im stumped and dont know wat else i can do i...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:21.
Twitter Facebook Google+