BSODs randomly. Now barely displays on boot.

tribaljuju · 19 Oct 2013

About one week ago I got a couple BSOD's, PC worked fine before and didn't install anything new. They powered off the pc almost immediately after. Now, it takes roughly one minute after the loading screen to display anything on the monitor, and half the time nothing ever displays via HDMI. I'm going to assume these are related.

Here is my zipped BSOD files. Two were from a week ago and the last just happened last night.

Thank you for any help!

https://skydrive.live.com/?mkt=en-US...ee28821a39e6ce

PC -

i5 3570k
750w PSU
1tb seagate hdd
12gb corsair RAM
Gigabyte 760 windforce
Gigabyte gaz77d3h mobo

Have tried -

Clean install of GPU drivers in safe mode, also tried beta drivers
Update mobo bios
Ran HDD error check
Checked cables for lose ends

Arc · 19 Oct 2013

Two are just .tmp files, and last one gives us this result ....

Realtek RTL8192C Wireless USB driver .......

Code:

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa800bd58cd0, fffff8000489d3d8, fffffa8009b60b50}

*** WARNING: Unable to verify timestamp for RTL8192cu.sys
*** ERROR: Module load completed but symbols could not be loaded for RTL8192cu.sys
Probably caused by : RTL8192cu.sys

Followup: MachineOwner
---------

Try to update it from Realtek

Also .... Etron USB 3.0 Extensible Hub Driver.

Code:

            Args: 00000000 00000000 00000000 00000000
 [ 16, 0]   0  0 fffffa800bd58cd0 00000000 fffff8800147ddb0-fffffa800bd201a0    
          Unable to load image EtronHub3.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys
 \Driver\EtronHub3    ndis!ndisSetDevicePowerOnComplete
            Args: 00000000 00000000 00000000 00000002
>[ 16, 2]   0 e1 fffffa800bd20050 00000000 00000000-00000000    pending
           \Driver\RTL8192cu
            Args: 00041100 00000001 00000001 00000002
 [ 16, 2]   0 e1 fffffa800bd6be10 00000000 00000000-00000000    pending
           \Driver\vwifibus
            Args: 00041100 00000001 00000001 00000002
 [  0, 0]   0  0 00000000 00000000 00000000-fffffa800f853e40    

            Args: 00000000 00000000 00000000 00000000

Install Etron USB 3.0 Driver version 1.0.0.0115 dated 2012/09/20; from GIGABYTE - Motherboard - Socket 1155 - GA-Z77-D3H (rev. 1.0)

Let us know the results.

tribaljuju · 19 Oct 2013

Thank you for your help! It seems to have helped!

One thing that seems weird is that if vga and hdmi are connected at the same time, it doesnt display anything until the welcome message on hdmi. Maybe this is normal? Either way, thanks. I'll mark as solved unless something else comes up.

Arc · 19 Oct 2013

Good to know that it is out of BSODs for now!

Not having that much experience about HDMI to say it as normal. Better you ask a question in General Discussion - Windows 7 Help Forums.