Memory management, system service exceptions

  1. Posts : 3
    Windows 7 64 bit

    Memory management, system service exceptions

    Been getting these bluescreen for ages, I thought it was due to overheat in the CPU so I changed the paste and everything, it seemed to be working fine but it started to happen again, most of the times it happens when I'm playing the game League of Legends.

    Here's the .rar file as instructed, I appreciate your help greatly.

    EDIT: Another detail I remembered is sometimes when I turn the pc off, when I go power it up, it will power up but won't boot, when it boots it sends me to the press F1 or F2 to load default settings. Then it works fine for like 2-3 days if I don't turn it off and just keep restarting
      My Computer

  2. Posts : 15,026
    Windows 10 Home 64Bit

    Welcome to the forum.

    Do not start the trial version of MalwareBytes

    AODDriver2.sys              Wed Nov 21 13:44:04 2012 (50AC8644)
    AMD OverDrive (AODDriver2.sys) is either a stand-alone application, or a component of the AMD VISION Engine Control Center. This driver is known to cause BSOD's on some Win7 systems.
    Please uninstall all AMD/ATI video stuff from Control Panel...Programs...Uninstall a program
    Then, download (but DO NOT install) a fresh copy of the ATI drivers from (in the upper right corner of the page)
    Use this procedure to install the DRIVER ONLY: ATI video cards - DRIVER ONLY installation procedure - Sysnative Forums

    If the device (AODDriver or AODDriver4.01) remains a problem, open Device Manager, select the "View" item.
    Then select "Show hidden devices" and scroll down to the Non-Plug and Play Drivers section.
    Locate the AODDriver entry, right click on it and select "Uninstall". Reboot for changes to take affect.
    Sometimes the driver remains and continues to cause BSOD's. If this is the case for you, post back and we'll give further instructions for safely removing it.

    If overclocking, please stop. Remove the overclock and return the system to stock/standard values while we're troubleshooting. Once the system is stable again, feel free to resume the overclocking.

    Please update the drivers below. If no updates are available. Please remove the software and its drivers completely.

    AsIO.sys Mon Apr 6 13:21:08 2009 (49D9AD64)
    Asus PCProbe Utility
    Driver Reference Table - AsIO.sys

    AtiPcie.sys Tue May 5 21:00:22 2009 (4A005486)
    ATI PCIE Driver for ATI PCIE chipset or [br] ATI PCI Express (3GIO) Filter[br]Found in my ATI video drivers (I have an Intel chipset)
    Driver Reference Table - AtiPcie.sys

    viahduaa.sys Fri May 8 09:24:59 2009 (4A03A60B)
    VIA High Definition Audio Function Driver
    Driver Reference Table - viahduaa.sys

    ASACPI.sys Thu May 14 07:25:17 2009 (4A0B72FD)
    Asus ATK0110 ACPI Utility (a known BSOD maker in Win7 and Win8). Also a part of many Asus utilities (Win8 versions available from Windows Update as an Optional Update - but check Asus first!)
    Driver Reference Table - ASACPI.sys

    • Test and Diagnose RAM issues with MEMTEST86+
      • Pay close attention to Part 3 of the tutorial "If you have errors". Take the test for at least 7-10 passes. It may take up to 22 passes to find problems.
        • Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold. RAM - Test with Memtest86+

    • System File Checker
      • The SFC /SCANNOW Command - System File Checker scans the integrity of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible. If you have modified your system files as in theming explorer/system files, running sfc /scannow will revert the system files to it's default state.
    • Run Disk Check in Windows 7
      • Run this on your Hard Drive(s). This will show you how to run Check Disk or chkdsk in Windows 7 to check a selected hard disk for file system errors and bad sectors on it. With both boxes checked for all HDDs and with Automatically fix file system errors. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer Log

    BugCheck 1A, {5002, fffff781c0000000, 8193, ff8172fffffffe}
    Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::CreateOneAllocation+1240 )
    BugCheck 3B, {c0000005, fffff88004701a00, fffff88006e5cef0, 0}
    Probably caused by : afd.sys ( afd+61a00 )
    BugCheck 3B, {c0000005, fffff800059f39bc, fffff880041fc8c0, 0}
    Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+100 )
    BugCheck 3B, {c0000005, fffff880142f1b29, fffff88004c6fc70, 0}
    Probably caused by : dxgkrnl.sys ( dxgkrnl!DXGDEVICE::DestroyAllocations+a5 )
    BugCheck 3B, {c0000005, fffff8000587bf88, fffff88003923ca0, 0}
    Probably caused by : ntkrnlmp.exe ( nt!CcFetchDataForRead+198 )
    BugCheck 1A, {41790, fffffa8001343b20, ffff, 0}
    Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+35084 )
    BugCheck 3B, {c0000005, fffff8000586fac5, fffff8800914c810, 0}
    Probably caused by : ntkrnlmp.exe ( nt!ExpInterlockedPopEntrySListFault16+0 )
    BugCheck 3B, {80000003, fffff880057cee71, fffff88009126080, 0}
    Probably caused by : luafv.sys ( luafv+11e71 )
    BugCheck 1A, {41790, fffffa800123d5f0, ffff, 0}
    Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_PROCESS_HEAP::Free+a2 )
      My Computer

  3. Posts : 3
    Windows 7 64 bit
    Thread Starter

    I will be trying all your steps and will report back if this keeps happening, also what tells you that Kaspersky is causing these BSODS? Isn't kaspersky a really good Anti virus?
      My Computer

  4. Posts : 15,026
    Windows 10 Home 64Bit

    Kaspersky is a good antivirus but is known to cause BSOD's also.
    Please uninstall it for testing purpose. If it wasn't directly the cause of your problem, you can install it back at a later time.
      My Computer

  5. Posts : 3
    Windows 7 64 bit
    Thread Starter

    Funny thing is, whenever I get this message when I turn the PC on "Press F1 to run SETUP Press F2 to load default values and continue". and just leave it on for days, by just restarting it and not turning it on and off, I do not get bluescreens, it's when I turn it off, and turn it back on without seeing that message that I get bluescreens.. It's kind of weird. Maybe this could tell you what the problem could be, also sometimes when I turn it off and turn it back on, it turns on but doesn't boot.
      My Computer

  6. Posts : 24,479
    Windows 7 Ultimate X64 SP1

    Replace the CMOS battery on the motherboard, see if that gets rid of the Press F1/F2 request. I'd also uninstall AMD Overdrive.
      My Computer


  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

й Designer Media Ltd
All times are GMT -5. The time now is 17:44.
Find Us