Windows 7: BSOD at Randomtimes, WDF1000.sys 0x1e when idle or under load.

Kitsunefoxie · 25 Oct 2013

Well, Litteraly just had another bluescreen about two hours after waking it up from hibernate.
Spoke too soon it seems.

I was only using Second life and that was pretty much it.

wdf1000.sys again

Kitsunefoxie · 25 Oct 2013

Ran a memtest86 no errors for two passes, ran a chkdsk /f and found no errors. Im pretty stumped now. I'll try re-installing all my drivers, then see.

Arc · 25 Oct 2013

Wacom HID Router Driver .... it is the object behind all those USBPORT entries as I think.

Code:

fffff880`037fd1b8  fffff880`051b5b27Unable to load image \SystemRoot\system32\DRIVERS\wachidrouter.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for wachidrouter.sys
*** ERROR: Module load completed but symbols could not be loaded for wachidrouter.sys
 wachidrouter+0x3b27

Update it from Discover Wacom | Interactive Pen Displays & Digital Drawing Tablets.

Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller, too.

Code:

fffff880`037fc4d8  fffff880`10582355Unable to load image \SystemRoot\system32\DRIVERS\yk62x64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for yk62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for yk62x64.sys
 yk62x64+0x17355

Update it from Marvell - Support.

Kaspersky seems to be a big issue here .......

Kaspersky KNEPS Power driver .....

Code:

fffff880`037fc658  fffff880`04917578Unable to load image \SystemRoot\system32\DRIVERS\kneps.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for kneps.sys
*** ERROR: Module load completed but symbols could not be loaded for kneps.sys
 kneps+0x22578

Kaspersky Lab Intermediate Network Driver.....

Code:

fffff880`037fc618  fffff880`047b3bcfUnable to load image \SystemRoot\system32\DRIVERS\klim6.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for klim6.sys
*** ERROR: Module load completed but symbols could not be loaded for klim6.sys
 klim6+0x2bcf

Uninstall Kaspersky using Kaspersky Removal Tool. At least as a test. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

And finally the display driver .....

Code:

fffff880`037fcee8  fffff880`0f86f922Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
 nvlddmkm+0x6b922

Install the NVIDIA DRIVERS 314.22WHQL only.

Uninstall All nvidia items in Control Panel > Programs and features
- 3D Vision Control Driver
- 3D Vision Driver
- Graphics Driver
- HD Audio Driver
- PhysX
- nvidia Update
(Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
Now follow Drivers - Clean Left over Files after Uninstalling
Download 314.22 WHQL. While installing, Select Custom (Advanced) install. In the next page, follow this settings:

Also, do one more test, as so many drivers are failing here in a single go ..... Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

And, supply us some necessary data .....

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator
Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy.

Let us know the results.

Kitsunefoxie · 25 Oct 2013

Alright, i'll try doing those too. I've used kaspersky for over two years and never had an issue like that with it, it also runs on every other system in the home, 7/vista/xp. So i'm gunna do what you say, run through with those, and then re-install kaspersky.

I'll try doing the yukon drivers again, but i don't think there's any more updates for those. since last year, and the Nvidia ones are from 2010, but if this keeps up i'm going to disable the yukon and use the nvidia one on the bios.

And i thought i updated my Wacom drivers too, but I'll uninstall those and do that again.

Then I'll do the GPU drivers, and use the Driver cleaner on that.I've had a lot of luck with 320.49, but i'll install the ones yoru guide lists. :>

I'll leave the memtest running longer then. even after two passes with all four sticks.

And the computer shouldnt be hot, It runs pretty cool. It's been on all morning so it's pretty warmed up, I'll post you a screenshot from Aida 64. right now it's on the Gaming setting, i usually leave it on balanced when not doing much on it, so it runs cooler even then.

This is my PSU It's only a month or two old.
be quiet! Silent PSU & Cooling for your PC L8 600W

Xtreme PSU rates the system at 484W

Arc · 25 Oct 2013

It is the indigenous problem with nforce that the updates to the drivers are not available, so you need to update /use the drivers form driver manufacturer's site, not OEM.

And, every machine is different on its environment and configuration. I hope you understand it. Kaspersky did not cause any issue elsewhere that does not necessarily mean that it must not to cause any issue here too. We have seen a very good lot of essentially identical issues with kaspersky which are solved by uninstalling Kaspersky.

Anyway, decision is obviously your. I just can guide you.

Kitsunefoxie · 25 Oct 2013

Yeah i figured as much, the Nforce ones from Asus are 15.41, waaaaaaaaaaaaay back from 2009, lol. The only real updated drivers are from nforcers.com I'm going through re-installing all the drivers right now, i decided to completely remove ever driver i use on the system and try from scratch again, one by one

Kitsunefoxie · 25 Oct 2013

Well kaspersky have popped out another KiS I had 2012 on my system, they have 2014 out now. I'll give that a go after the whole MSE does it thing.

Everything has been re-installed and updated, so good so far.

Kitsunefoxie · 25 Oct 2013

Malwarebytes and MSE found nothing ont he computer, now i'll run memtest.

Arc · 25 Oct 2013

Quote: Originally Posted by Kitsunefoxie

Malwarebytes and MSE found nothing ont he computer, now i'll run memtest.

That is good and relieving. I suggested those scans as I noticed the resident antivirus is somehow failing and crashing.

Kitsunefoxie · 26 Oct 2013

So far nothing, it's been running 10 hours 30 minutes with 5 full passes of no errors.
Do you want me to leave it till it hits eight? Using laptop for now. lol.